Dne petek, 12. maj 2023 ob 12:30:32 CEST je Jonathan McDowell napisal(a): > On Thu, May 11, 2023 at 06:11:49PM +0200, Jernej Škrabec wrote: > > Dne sreda, 10. maj 2023 ob 14:02:28 CEST je Jonathan McDowell napisal(a): > > > This adds a DT node to hook up the internal temperature ADC to the > > > iio-hwmon driver. The various voltage + current ADCs are consumed and > > > exposed by their respective drivers, but this is not and is always > > > available. Naming chosen to match the axp20x_ prefix the power sensors > > > use. > > > > Sorry for maybe obvious thing, but where are other ADC channels exposed? > > In the associated power drivers; e.g. axp20x_ac_power, axp20x_usb_power > + axp20x_battery. The internal temperature is the only one that > logically belongs to the chip as a whole rather than one of the > subfunctions. > > root@chip:~# sensors > axp20x_battery-isa-0000 > Adapter: ISA adapter > in0: 0.00 V > curr1: 0.00 A > > pmic_temp-isa-0000 > Adapter: ISA adapter > temp1: +42.5°C > > axp20x_ac-isa-0000 > Adapter: ISA adapter > in0: 0.00 V > curr1: 0.00 A > > axp20x_usb-isa-0000 > Adapter: ISA adapter > in0: 4.93 V (min = +4.00 V) > curr1: 330.00 mA (max = +0.00 A) Right. Reviewed-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> Best regards, Jernej > > > > Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx> > > > --- > > > > > > arch/arm/boot/dts/axp209.dtsi | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/axp209.dtsi > > > b/arch/arm/boot/dts/axp209.dtsi > > > index ca240cd6f6c3..469d0f7d5185 100644 > > > --- a/arch/arm/boot/dts/axp209.dtsi > > > +++ b/arch/arm/boot/dts/axp209.dtsi > > > @@ -48,6 +48,13 @@ > > > > > > * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf > > > */ > > > > > > +/ { > > > + pmic-temp { > > > + compatible = "iio-hwmon"; > > > + io-channels = <&axp_adc 4>; /* Internal temperature */ > > > + }; > > > +}; > > > + > > > > > > &axp209 { > > > > > > compatible = "x-powers,axp209"; > > > interrupt-controller; > > J.
