[PATCH V2 1/5] clk: qcom: branch: Extend the invert logic for branch2 clocks

[Taniya Das <quic_tdas@xxxxxxxxxxx>]

From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>

Add support to handle the invert logic for branch2 clocks.
Invert branch halt would indicate the clock ON when CLK_OFF
bit is '1' and OFF when CLK_OFF bit is '0'.

Signed-off-by: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
---
Changes since v1:
 - Removed the multiple returns from inside clk_branch2_check_halt.

 drivers/clk/qcom/clk-branch.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
index ca896ebf7e1b..fc4735f74f0f 100644
--- a/drivers/clk/qcom/clk-branch.c
+++ b/drivers/clk/qcom/clk-branch.c
@@ -43,6 +43,7 @@ static bool clk_branch2_check_halt(const struct clk_branch *br, bool enabling)
 {
 	u32 val;
 	u32 mask;
+	bool invert = (br->halt_check == BRANCH_HALT_ENABLE);
 
 	mask = CBCR_NOC_FSM_STATUS;
 	mask |= CBCR_CLK_OFF;
@@ -51,11 +52,10 @@ static bool clk_branch2_check_halt(const struct clk_branch *br, bool enabling)
 
 	if (enabling) {
 		val &= mask;
-		return (val & CBCR_CLK_OFF) == 0 ||
+		return (val & CBCR_CLK_OFF) == (invert ? CBCR_CLK_OFF : 0) ||
 			FIELD_GET(CBCR_NOC_FSM_STATUS, val) == FSM_STATUS_ON;
-	} else {
-		return val & CBCR_CLK_OFF;
 	}
+	return (val & CBCR_CLK_OFF) == (invert ? 0 : CBCR_CLK_OFF);
 }
 
 static int clk_branch_wait(const struct clk_branch *br, bool enabling,
-- 
2.17.1