Add check to fix the possible array out of bounds violation by making speed equal to GEN1_CORE_CLK_FREQ when its value is more than the size of "pcie_gen_freq" array. This array has size of four but possible speed (CLS) values are from "0 to 0xF". So, "speed - 1" values are "-1 to 0xE". Suggested-by: Bjorn Helgaas <helgaas@xxxxxxxxxx> Signed-off-by: Sumit Gupta <sumitg@xxxxxxxxxx> Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@xxxxxxxxxx/ Acked-by: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-tegra194.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index 09825b4a075e..e6eec85480ca 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -223,6 +223,7 @@ #define EP_STATE_ENABLED 1 static const unsigned int pcie_gen_freq[] = { + GEN1_CORE_CLK_FREQ, /* PCI_EXP_LNKSTA_CLS == 0; undefined */ GEN1_CORE_CLK_FREQ, GEN2_CORE_CLK_FREQ, GEN3_CORE_CLK_FREQ, @@ -459,7 +460,11 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg) speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) & PCI_EXP_LNKSTA_CLS; - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]); + + if (speed >= ARRAY_SIZE(pcie_gen_freq)) + speed = 0; + + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]); if (pcie->of_data->has_ltr_req_fix) return IRQ_HANDLED; @@ -1020,7 +1025,11 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci) speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) & PCI_EXP_LNKSTA_CLS; - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]); + + if (speed >= ARRAY_SIZE(pcie_gen_freq)) + speed = 0; + + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]); tegra_pcie_enable_interrupts(pp); -- 2.17.1
