On Wed, 10 May 2023 18:22:42 +0200, Martin Zaťovič wrote: > GPIO bitbanged Wiegand controller requires definitions of GPIO > lines to be used on top of the common Wiegand properties. Wiegand > utilizes two such lines - D0(low data line) and D1(high data line). > > Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Signed-off-by: Martin Zaťovič <m.zatovic1@xxxxxxxxx> > --- > .../bindings/wiegand/wiegand-gpio.yaml | 51 +++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/wiegand/wiegand-controller.yaml Documentation/devicetree/bindings/wiegand/wiegand-gpio.example.dts:20.21-29.11: Warning (unit_address_vs_reg): /example-0/wiegand@f00: node has a unit name, but no reg or ranges property /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/wiegand/wiegand-gpio.example.dtb: wiegand@f00: False schema does not allow {'compatible': ['wiegand-gpio'], 'pulse-len-us': [[50]], 'interval-len-us': [[2000]], 'frame-gap-us': [[2000]], 'data-lo-gpios': [[4294967295, 6, 6]], 'data-hi-gpios': [[4294967295, 7, 6]], '$nodename': ['wiegand@f00']} From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/wiegand/wiegand-gpio.example.dtb: wiegand@f00: Unevaluated properties are not allowed ('frame-gap-us', 'interval-len-us', 'pulse-len-us' were unexpected) From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/wiegand/wiegand-gpio.yaml See https://patchwork.ozlabs.org/patch/1779628 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
