Add board support for ICnova A20 SomPi compute module on ICnova ADB4006 development board. I rebased the series on v6.4-rc1, I'm also using a new mail address because of bouncing issues. v4: - rebase on v6.4-rc1 v3: - drop stray blank lines at end of files - separate patch for bindings - update licensing to "GPL-2.0 OR MIT" - fix typo: ICNova -> ICnova v2: - use short licensing header - remove deprecated elements from led nodes - disable csi power supply - add missing pins in usbphy node - split dts into SoM dtsi and carrier board dts v1 of this patch was sent to the uboot mailing list [1]. [1] https://lists.denx.de/pipermail/u-boot/2023-April/514605.html Ludwig Kormann (2): dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding arm: dts: sunxi: Add ICnova A20 ADB4006 board .../devicetree/bindings/arm/sunxi.yaml | 6 + arch/arm/boot/dts/Makefile | 1 + .../boot/dts/sun7i-a20-icnova-a20-adb4006.dts | 137 ++++++++++++++++++ arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi | 62 ++++++++ 4 files changed, 206 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20-adb4006.dts create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-a20.dtsi -- 2.30.2
