On Sat, 6 May 2023 10:30:14 +0300
Maksim Kiselev <bigunclemax@xxxxxxxxx> wrote:
Hi,
> Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
> an optional SPI flash that connects to the SPI0 controller.
>
> This controller is the same for R329/D1/R528/T113s SoCs and
> should be supported by the sun50i-r329-spi driver.
>
> So let's add its DT node.
>
> Signed-off-by: Maksim Kiselev <bigunclemax@xxxxxxxxx>
> ---
> .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 21 +++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index 922e8e0e2c09..a52999240a8e 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -108,6 +108,12 @@ rmii_pe_pins: rmii-pe-pins {
> function = "emac";
> };
>
> + /omit-if-no-ref/
> + spi0_pins: spi0-pins {
> + pins = "PC2", "PC3", "PC4", "PC5";
> + function = "spi0";
> + };
> +
> /omit-if-no-ref/
> uart1_pg6_pins: uart1-pg6-pins {
> pins = "PG6", "PG7";
> @@ -447,6 +453,21 @@ mmc2: mmc@4022000 {
> #size-cells = <0>;
> };
>
> + spi0: spi@4025000 {
> + compatible = "allwinner,sun20i-d1-spi",
> + "allwinner,sun50i-r329-spi";
> + reg = <0x04025000 0x300>;
The manual (and the other DTs) use 4K, so please use that here as well.
> + interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
> + clock-names = "ahb", "mod";
> + dmas = <&dma 22>, <&dma 22>;
> + dma-names = "rx", "tx";
> + resets = <&ccu RST_BUS_SPI0>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
I think we should add the second SPI controller here as well, using
that DBI fallback compatible string.
Above looks correct when compared to the manual.
Thanks,
Andre
> +
> usb_otg: usb@4100000 {
> compatible = "allwinner,sun20i-d1-musb",
> "allwinner,sun8i-a33-musb";
