On 06/05/2023 15:30, Konrad Dybcio wrote:
On 6.05.2023 13:48, Dmitry Baryshkov wrote:
On Fri, 5 May 2023 at 21:41, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
On 5.05.2023 19:12, Dang Huynh wrote:
The F(x)tec Pro1X is a mobile phone released by FX Technologies Ltd
in 2022.
The phone is exactly the same as the Pro1 released in 2019 with some
changes:
- MSM8998 -> SM6115
- Camera button is no longer multistate
- Only one 48MP back camera
- A new keyboard layout picked by the community.
This commit has the following features working:
- Display (using simplefb)
- UFS
- Power and volume buttons
- Pinctrl
- RPM Regulators
- USB (Device Mode)
To get a successful boot run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\
sm6115-fxtec-pro1x.dtb > .Image.gz-dtb
mkbootimg --kernel .Image.gz-dtb \
--ramdisk initrd.img \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--second_offset 0xf00000 \
--tags_offset 0x100 \
--pagesize 4096 \
--cmdline "CMDLINE HERE" \
-o qx1050-boot.img
fastboot flash boot qx1050-boot.img
fastboot erase dtbo
fastboot reboot
Signed-off-by: Dang Huynh <danct12@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 248 ++++++++++++++++++++++++
2 files changed, 249 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d42c59572ace..e311ba675f35 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -174,6 +174,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
new file mode 100644
index 000000000000..a9ff1d9534ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-only
I'm not a licensing expert, but fyi sm6115.dtsi uses (GPL2+ & BSD3)
Yes, we usually ask for the DTs to be dual-licensed, since they may be
e.g. used or distributed as a part of the bootloader.
[skipped]
+
+&rpm_requests {
+ pm6125-regulators {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ vreg_s6a: s6 {
You can keep the PMIC name apparent by renaming vreg_s6a to
pm6125_s6 etc.
Hmm, we were usually using the resource-name here,
Yeah, but on smd rpm a "resource name" is a very vague concept,
you have a "path" to a resource (which is resolved internally by RPM),
then there's a "type", "key" and "id"
so vreg_s6a is fine
(usually it would be vreg_s6a_0p3 or vreg_s6a_1p5).
That naming is *very* problematic if your device isn't a dragonboard/RBx
where you can look up the schematics and leads to a lot of confusion, as
you can't really be sure what voltages are correct until you can confirm
everything works properly on the board :/
Fully agree here. I just wanted to point out that vreg_s6a is also a
frequently used alias.
Konrad
Konrad
+ regulator-min-microvolt = <304000>;
+ regulator-max-microvolt = <1456000>;
+ };
--
With best wishes
Dmitry
