Hello Jonathan, On Mon, May 01, 2023 at 03:56:45PM +0100, Jonathan Cameron wrote: > On Tue, 25 Apr 2023 00:22:27 +0200 > Mehdi Djait <mehdi.djait.k@xxxxxxxxx> wrote: > > > Kionix KX132-1211 is a tri-axis 16-bit accelerometer that can support > > ranges from ±2G to ±16G, digital output through I²C/SPI. > > Add support for basic accelerometer features such as reading acceleration > > via IIO using raw reads, triggered buffer (data-ready), or the WMI IRQ. > > > > Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf > > Signed-off-by: Mehdi Djait <mehdi.djait.k@xxxxxxxxx> > > Two tiny things inline. > > > +static int kx132_get_fifo_bytes(struct kx022a_data *data) > > +{ > > + struct device *dev = regmap_get_device(data->regmap); > > + __le16 buf_status; > > + int ret, fifo_bytes; > > + > > + ret = regmap_bulk_read(data->regmap, data->chip_info->buf_status1, > > + &buf_status, sizeof(buf_status)); > > + if (ret) { > > + dev_err(dev, "Error reading buffer status\n"); > > + return ret; > > + } > > + > > + fifo_bytes = le16_to_cpu(buf_status); > > + fifo_bytes &= data->chip_info->buf_smp_lvl_mask; > > Slight preference for FIELD_GET() as it saves me checking the mask includes > lowest bits. This will mean I have the remove the chip_info member buf_smp_lvl_mask and use KX132_MASK_BUF_SMP_LVL directly because otherwise the __builtin_constant_p function will cause an error when building. Check: https://elixir.bootlin.com/linux/latest/source/include/linux/bitfield.h#L65 I can change it to FIELD_GET() if you want to. > > > > + > > + return fifo_bytes; > > +} > > + > > static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, > > bool irq) > > { > > @@ -1036,6 +1157,32 @@ const struct kx022a_chip_info kx022a_chip_info = { > > }; > > EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A); > > > > +const struct kx022a_chip_info kx132_chip_info = { > > + .name = "kx132-1211", > > + .regmap_config = &kx132_regmap_config, > > + .channels = kx132_channels, > > + .num_channels = ARRAY_SIZE(kx132_channels), > > + .fifo_length = KX132_FIFO_LENGTH, > > + .who = KX132_REG_WHO, > > + .id = KX132_ID, > > + .cntl = KX132_REG_CNTL, > > + .cntl2 = KX132_REG_CNTL2, > > + .odcntl = KX132_REG_ODCNTL, > > + .buf_cntl1 = KX132_REG_BUF_CNTL1, > > + .buf_cntl2 = KX132_REG_BUF_CNTL2, > > + .buf_clear = KX132_REG_BUF_CLEAR, > > + .buf_status1 = KX132_REG_BUF_STATUS_1, > > + .buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL, > > There are some things in here (typically where the define isn't used > anywhere else) where I think it would be easier to follow if the > value was listed here. Masks and IDs for example. > After removing buf_smp_lvl_mask, which members will be easier to understand (besides id) ? -- Kind Regards Mehdi Djait
