[PATCH v2 0/3] arm64: dts: ti: k3-j7200: Fixes for various dtbs_checks warnings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Few fixups for j7200 dtbs_check warnings.

This is V2 for the following series with the feedback addressed,

V1 : https://lore.kernel.org/all/20230424173623.477577-1-nm@xxxxxx/

Bootlog with basic hyperflash testing:
https://gist.github.com/vaishnavachath/f7265e932725fd992dbc4e48b993e9c0

NOTE: lets see the discussion summary of [1] to see where to take this
series, but, will put it out here in the list for discussion anyways.

Patch 3/3 depends on the following patch under review which enables reg-mux
to be used when parent node is not syscon :
https://lore.kernel.org/all/20230424184810.29453-1-afd@xxxxxx/

Changelog:

V1->V2:
 * Address feedback as recommended in [2].
 * Address feedback from Udit to limit the FSS register region size as
 per TRM.
 * Use reg-mux changes in [3] to simplify the hbmc-mux modelling   

[1] https://lore.kernel.org/all/76da0b98-3274-b047-db11-ecabc117ae11@xxxxxx/
[2] https://lore.kernel.org/all/20230503115130.c7m4a7crub7kmfjw@gluten/
[3] https://lore.kernel.org/all/20230424184810.29453-1-afd@xxxxxx/

Nishanth Menon (3):
  arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix
    from nodename
  arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to
    ti,j721e-system-controller
  arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 21 ++++++++++---------
 1 file changed, 11 insertions(+), 10 deletions(-)

-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux