Re: [PATCH v2 1/4] dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/05/2023 11:46, Arnaud Pouliquen wrote:
> With the introduction of the SCMI (System Control and Management
> Interface), it is now possible to use the SCMI to handle the
> hold boot instead of a dedicated SMC call.



>  additionalProperties: false
>  
>  examples:
>    - |
>      #include <dt-bindings/reset/stm32mp1-resets.h>
> -    m4_rproc: m4@10000000 {
> +    m4_rproc_example1: m4@10000000 {

Just drop the label. It's not used.


>        compatible = "st,stm32mp1-m4";
>        reg = <0x10000000 0x40000>,
>              <0x30000000 0x40000>,
>              <0x38000000 0x10000>;
>        resets = <&rcc MCU_R>;
> +      reset-names = "mcu_rst";
>        st,syscfg-holdboot = <&rcc 0x10C 0x1>;
> -      st,syscfg-tz = <&rcc 0x000 0x1>;
> +      st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
> +      st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
> +    };
> +  - |
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    m4_rproc_example2: m4@10000000 {

Also here.


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux