On Thu, 4 May 2023 at 15:23, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
> On 4.05.2023 10:26, Bhupesh Sharma wrote:
> > Add the Embedded USB Debugger(EUD) device tree node for
> > SM6115 / SM4250 SoC.
> >
> > The node contains EUD base register region, EUD mode manager
> > register region and TCSR Base register region along with the
> > interrupt entry.
> >
> > Also add the typec connector node for EUD which is attached to
> > EUD node via port. EUD is also attached to DWC3 node via port.
> >
> > To enable the role switch, we need to set dr_mode = "otg" property
> > for 'usb_dwc3' sub-node in the board dts file.
> >
> > Also the EUD device can be enabled on a board once linux is boot'ed
> > by setting:
> > $ echo 1 > /sys/bus/platform/drivers/qcom_eud/../enable
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sm6115.dtsi | 48 ++++++++++++++++++++++++++++
> > 1 file changed, 48 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index f67863561f3f..6865342fc42f 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -180,6 +180,18 @@ core3 {
> > };
> > };
> >
> > + eud_typec: connector {
> > + compatible = "usb-c-connector";
> > +
> > + ports {
> > + port@0 {
> > + con_eud: endpoint {
> > + remote-endpoint = <&eud_con>;
> > + };
> > + };
> > + };
> > + };
> > +
> > firmware {
> > scm: scm {
> > compatible = "qcom,scm-sm6115", "qcom,scm";
> > @@ -647,6 +659,35 @@ gcc: clock-controller@1400000 {
> > #power-domain-cells = <1>;
> > };
> >
> > + eud: eud@1610000 {
> > + compatible = "qcom,sm6115-eud", "qcom,eud";
> > + reg = <0x0 0x01610000 0x0 0x2000>,
> > + <0x0 0x01612000 0x0 0x1000>,
> > + <0x0 0x003c0000 0x0 0x40000>;
> > + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
> > + qcom,secure-mode-enable;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> Please insert a newline before each child node.
Ok, I will do it in next version.
Thanks,
Bhupesh
