TI K3 J784S4 has the Cadence OSPI controllers OSPI0 and OSPI1 on FSS
bus for interfacing with OSPI flashes. Add the nodes to allow using
SPI flashes.
Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index f04fcb614cbe..91c8e0bf8ce0 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -342,4 +342,45 @@
ti,cpts-periodic-outputs = <2>;
};
};
+
+ fss: bus@47000000 {
+ compatible = "simple-bus";
+ reg = <0x00 0x47000000 0x00 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x47040000 0x00 0x100>,
+ <0x05 0x0000000 0x01 0x0000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 161 7>;
+ assigned-clocks = <&k3_clks 161 7>;
+ assigned-clock-parents = <&k3_clks 161 9>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x47050000 0x00 0x100>,
+ <0x07 0x0000000 0x01 0x0000000>;
+ interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 162 7>;
+ power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
};
--
2.17.1
