On Wed, Nov 26, 2014 at 02:57:42PM +0100, Linus Walleij wrote: > make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > KBUILD_OUTPUT=build-u300 u300_defconfig > make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > KBUILD_OUTPUT=build-u300 zImage CONFIG_DEBUG_SECTION_MISMATCH=y > make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > KBUILD_OUTPUT=build-u300 dtbs > make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > KBUILD_OUTPUT=build-u300 zImage CONFIG_DEBUG_SECTION_MISMATCH=y > > -> Rebuilds everything. > > This doesn't occur before the offending commit. So it only happens > when specifying extra environment variables on the command line. I suspect if you also provide the CONFIG_DEBUG_SECTION_MISMATCH=y on the dtbs line, everything will work properly. The problem is that dtbs line executes a prepare, which I guess rebuilds the bounds stuff. So, the dtbs target results in it being rebuilt without the section mismatch, and then you re-execute a make with it, causing the bounds stuff to be rebuilt again. -- FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html