ESM (Error Signaling Module) is a fundamental IP responsible for handling safety events. The driver currently present in U-Boot is responsible for configuring ESM. This patch series adds dt-binding and nodes for J721E and J7200. This goes towards end goal of having DTB sync with that of U-Boot as well as ensuring completeness of hardware description in devicetree. Changes in v5: - added esm node to k3-j721e-main.dtsi Changes in v4: - hwmon/ti,j721e-esm.yaml -> misc/ti,j721e-esm.yaml - retained tag by Krzysztof for dt-binding Changes in v3: - formatting changes in dt-binding - modified example in dt-binding cbass_main -> bus - changed subject misc -> hwmon Changes in v2: - misc/esm-k3.yaml -> hwmon/ti,j721e-esm.yaml - formatting changes in dt-binding - modified example in dt-binding Neha Malcom Francis (3): dt-bindings: misc: esm: Add ESM support for TI K3 devices arm64: dts: ti: k3-j721e: Add ESM support arm64: dts: ti: k3-j7200: Add ESM support .../bindings/misc/ti,j721e-esm.yaml | 53 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 + arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 +++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 + 5 files changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml -- 2.34.1
