RE: [EXT] Re: [PATCH 2/2 v4] Watchdog: Add marvell GTI watchdog driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Bharat Bhushan
> Sent: Tuesday, May 2, 2023 10:35 PM
> To: Guenter Roeck <linux@xxxxxxxxxxxx>; wim@xxxxxxxxxxxxxxxxxx;
> robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; linux-
> watchdog@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; Sunil Kovvuri Goutham <sgoutham@xxxxxxxxxxx>
> Subject: RE: [EXT] Re: [PATCH 2/2 v4] Watchdog: Add marvell GTI watchdog driver
> 
> Please see inline
> 
> > -----Original Message-----
> > From: Guenter Roeck <groeck7@xxxxxxxxx> On Behalf Of Guenter Roeck
> > Sent: Saturday, April 29, 2023 8:44 PM
> > To: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>; wim@xxxxxxxxxxxxxxxxxx;
> > robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; linux-
> > watchdog@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; Sunil Kovvuri Goutham <sgoutham@xxxxxxxxxxx>
> > Subject: [EXT] Re: [PATCH 2/2 v4] Watchdog: Add marvell GTI watchdog
> > driver
> >
> > External Email
> >
> > ----------------------------------------------------------------------
> > On 4/27/23 00:14, Bharat Bhushan wrote:
> > > This patch add support for Marvell GTI watchdog.  Global timer unit
> > > (GTI) support hardware watchdog timer. Software programs watchdog
> > > timer to generate interrupt on first timeout, second timeout is
> > > configured to be ignored and system reboots on third timeout.
> > >
> > > Signed-off-by: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> > > ---
> > > v4:
> > >   - Use generic name "GTI (Global Timer)" and removed OcteonTX2 as this
> driver
> > >     is applicable for other marvell devices as well.
> > >
> > >   drivers/watchdog/Kconfig           |  11 ++
> > >   drivers/watchdog/Makefile          |   1 +
> > >   drivers/watchdog/marvell_gti_wdt.c | 271
> > +++++++++++++++++++++++++++++
> > >   3 files changed, 283 insertions(+)
> > >   create mode 100644 drivers/watchdog/marvell_gti_wdt.c
> > >
> > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > > index
> > > f0872970daf9..a96e7d7c0ad2 100644
> > > --- a/drivers/watchdog/Kconfig
> > > +++ b/drivers/watchdog/Kconfig
> > > @@ -1779,6 +1779,17 @@ config OCTEON_WDT
> > >   	  from the first interrupt, it is then only poked when the
> > >   	  device is written.
> > >
> > > +config MARVELL_GTI_WDT
> > > +	tristate "Marvell GTI Watchdog driver"
> > > +	depends on ARCH_THUNDER || COMPILE_TEST
> >
> > As 0-day reported, COMPILE_TEST does not work if there are asm
> > includes in the code.
> 
> Will remove asm include dependency in next version
> 
> >
> > > +	help
> > > +	 Marvell GTI hardware supports watchdog timer. First timeout
> > > +	 works as watchdog pretimeout and installed interrupt handler
> > > +	 will be called on first timeout. Hardware can generate interrupt
> > > +	 to SCP on second timeout but it is not enabled, So second
> > > +	 timeout is ignored. If device poke does not happen then system
> > > +	 will reboot on third timeout.
> > > +
> > >   config BCM2835_WDT
> > >   	tristate "Broadcom BCM2835 hardware watchdog"
> > >   	depends on ARCH_BCM2835 || (OF && COMPILE_TEST) diff --git
> > > a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index
> > > 9cbf6580f16c..bd425408fcaa 100644
> > > --- a/drivers/watchdog/Makefile
> > > +++ b/drivers/watchdog/Makefile
> > > @@ -98,6 +98,7 @@ obj-$(CONFIG_VISCONTI_WATCHDOG) +=
> visconti_wdt.o
> > >   obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
> > >   obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o
> > >   obj-$(CONFIG_SUNPLUS_WATCHDOG) += sunplus_wdt.o
> > > +obj-$(CONFIG_MARVELL_GTI_WDT) += marvell_gti_wdt.o
> > >
> > >   # X86 (i386 + ia64 + x86_64) Architecture
> > >   obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o diff --git
> > > a/drivers/watchdog/marvell_gti_wdt.c
> > > b/drivers/watchdog/marvell_gti_wdt.c
> > > new file mode 100644
> > > index 000000000000..a3f0740dedca
> > > --- /dev/null
> > > +++ b/drivers/watchdog/marvell_gti_wdt.c
> > > @@ -0,0 +1,271 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/* Marvell GTI Watchdog driver
> > > + *
> > > + * Copyright (C) 2023 Marvell.
> > > + */
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/of_platform.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/watchdog.h>
> > > +
> > > +#include <asm/arch_timer.h>
> > > +
> > > +/*
> > > + * Hardware supports following mode of operation:
> > > + * 1) Interrupt Only:
> > > + *    This will generate the interrupt to arm core whenever timeout happens.
> > > + *
> > > + * 2) Interrupt + del3t (Interrupt to firmware (SCP processor)).
> > > + *    This will generate interrupt to arm core on 1st timeout happens
> > > + *    This will generate interrupt to SCP processor on 2nd timeout happens
> > > + *
> > > + * 3) Interrupt + Interrupt to SCP processor (called delt3t) + reboot.
> > > + *    This will generate interrupt to arm core on 1st timeout happens
> > > + *    Will generate interrupt to SCP processor on 2nd timeout happens,
> > > + *    if interrupt is configured.
> > > + *    Reboot on 3rd timeout.
> > > + *
> > > + * Driver will use hardware in mode-3 above so that system can
> > > +reboot in case
> > > + * a hardware hang. Also h/w is configured not to generate SCP
> > > +interrupt, so
> > > + * effectively 2nd timeout is ignored within hardware.
> > > + */
> > > +
> > > +
> > > +/* GTI CWD Watchdog Registers */
> > > +#define GTI_CWD_GLOBAL_WDOG_IDX		63
> >
> > It might make sense to explain "63".
> 
> Okay, will add below comment
> /* GTI hardware block supports total 64 timers and timer 63 is used for system
> watchdog */
> 
> "IDX" seems confusing, will rename to "GTI_CWD_GLOBAL_WDOG_TIMER"

After some more thought removed this hardcoding from code and added device tree property for which counter to be used.

Sent next version with this change.

Thanks
-Bharat

> 
> >
> > > +#define GTI_CWD_WDOG			(0x8 *
> > GTI_CWD_GLOBAL_WDOG_IDX)
> > > +#define GTI_CWD_WDOG_MODE_INT_DEL3T_RST	0x3
> > > +#define GTI_CWD_WDOG_MODE_MASK		0x3
> > > +#define GTI_CWD_WDOG_LEN_SHIFT		4
> > > +#define GTI_CWD_WDOG_CNT_SHIFT		20
> > > +
> > > +/* GTI Per-core Watchdog Interrupt Register */
> > > +#define GTI_CWD_INT			0x200
> > > +#define GTI_CWD_INT_PENDING_STATUS	(1ULL <<
> > GTI_CWD_GLOBAL_WDOG_IDX)
> >
> > Please use BIT_ULL().
> 
> Ok
> 
> >
> > > +
> > > +/* GTI Per-core Watchdog Interrupt Enable Clear Register */
> > > +#define GTI_CWD_INT_ENA_CLR		0x210
> > > +#define GTI_CWD_INT_ENA_CLR_VAL		(1ULL <<
> > GTI_CWD_GLOBAL_WDOG_IDX)
> > > +
> > > +/* GTI Per-core Watchdog Interrupt Enable Set Register */
> > > +#define GTI_CWD_INT_ENA_SET		0x218
> > > +#define GTI_CWD_INT_ENA_SET_VAL		(1ULL <<
> > GTI_CWD_GLOBAL_WDOG_IDX)
> > > +
> > > +/* GTI Per-core Watchdog Poke Registers */
> > > +#define GTI_CWD_POKE		(0x10000 + 0x8 *
> > GTI_CWD_GLOBAL_WDOG_IDX)
> >
> > There should be a comment explaining the "8".
> 
> GTI_CWD_POKE is poke register for watchdog counter
> GTI_CWD_GLOBAL_WDOG_TIMER .
> Above calculation is for getting the register address for watchdog timer
> GTI_CWD_GLOBAL_WDOG_TIMER Can add comment
> /* Each POKE register is 64bit and so GTI_CWD_POKE is register address for
> watchdog counter GTI_CWD_GLOBAL_WDOG_TIMER */
> 
> > Also, there is a define for "0x8 *
> > GTI_CWD_GLOBAL_WDOG_IDX" above.
> > Why not use it here ?
> 
> GTI_CWD_GLOBAL_WDOG_TIMER  is used for register address calculation, so will
> keep then separate to avoid any confusion.
> 
> >
> > > +#define GTI_CWD_POKE_VAL	(1ULL << GTI_CWD_GLOBAL_WDOG_IDX)
> >
> > I don't think it makes sense to have three defines with the same value.
> 
> Yes they are same value, but they are bit field in different h/w register. I want to
> keep a separate name to avoid any confusion.
> 
> >
> > > +
> > > +struct gti_wdt_priv {
> > > +	struct watchdog_device wdev;
> > > +	void __iomem *base;
> > > +	u64 clock_freq;
> > > +	int irq;
> > > +};
> > > +
> > > +static irqreturn_t gti_wdt_interrupt(int irq, void *data) {
> > > +	struct watchdog_device *wdev = data;
> > > +	struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > +
> > > +	/* Clear Interrupt Pending Status */
> > > +	writeq(GTI_CWD_INT_PENDING_STATUS, priv->base + GTI_CWD_INT);
> > > +
> > > +	watchdog_notify_pretimeout(wdev);
> > > +
> > > +	return IRQ_HANDLED;
> > > +}
> > > +
> > > +static int gti_wdt_ping(struct watchdog_device *wdev) {
> > > +	struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > +
> > > +	writeq(GTI_CWD_POKE_VAL, priv->base + GTI_CWD_POKE);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int gti_wdt_start(struct watchdog_device *wdev) {
> > > +	struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > +	u64 regval;
> > > +
> > > +	if (!wdev->pretimeout)
> > > +		return -EINVAL;
> > > +
> > > +	set_bit(WDOG_HW_RUNNING, &wdev->status);
> > > +
> > > +	/* Clear any pending interrupt */
> > > +	writeq(GTI_CWD_INT_PENDING_STATUS, priv->base + GTI_CWD_INT);
> > > +
> > > +	/* Enable Interrupt */
> > > +	writeq(GTI_CWD_INT_ENA_SET_VAL, priv->base +
> > GTI_CWD_INT_ENA_SET);
> > > +
> > > +	/* Set (Interrupt + SCP interrupt (DEL3T) + core domain reset) Mode */
> > > +	regval = readq(priv->base + GTI_CWD_WDOG);
> > > +	regval |= GTI_CWD_WDOG_MODE_INT_DEL3T_RST;
> > > +	writeq(regval, priv->base + GTI_CWD_WDOG);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int gti_wdt_stop(struct watchdog_device *wdev) {
> > > +	struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > +	u64 regval;
> > > +
> > > +	/* Disable Interrupt */
> > > +	writeq(GTI_CWD_INT_ENA_CLR_VAL, priv->base +
> > GTI_CWD_INT_ENA_CLR);
> > > +
> > > +	/* Set GTI_CWD_WDOG.Mode = 0 to stop the timer */
> > > +	regval = readq(priv->base + GTI_CWD_WDOG);
> > > +	regval &= ~GTI_CWD_WDOG_MODE_MASK;
> > > +	writeq(regval, priv->base + GTI_CWD_WDOG);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int gti_wdt_settimeout(struct watchdog_device *wdev,
> > > +					unsigned int timeout)
> > > +{
> > > +	struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > +	u64 timeout_wdog, regval;
> > > +
> > > +	/* Update new timeout */
> > > +	wdev->timeout = timeout;
> > > +
> > > +	/* Pretimeout is 1/3 of timeout */
> > > +	wdev->pretimeout = timeout / 3;
> > > +	if (!wdev->pretimeout)
> > > +		return -EINVAL;
> >
> > Since min_timeout is set to 3 seconds, this can not happen, and the
> > check is unnecessary.
> >
> > > +
> > > +	/* Get clock cycles from timeout in second */
> >
> > from pretimeout ?
> 
> Yes, will change comment.
> 
> >
> > > +	timeout_wdog = wdev->pretimeout * priv->clock_freq;
> > > +
> > > +	/* Watchdog counts in 1024 cycle steps */
> > > +	timeout_wdog = timeout_wdog >> 10;
> > > +
> > > +	timeout_wdog = (timeout_wdog + 0xff) >> 8;
> > > +	if (timeout_wdog >= 0x10000)
> > > +		timeout_wdog = 0xffff;
> > > +
> > > +	/*
> > > +	 * GTI_CWD_WDOG.LEN have only upper 16-bits of 24-bits
> > > +	 * GTI_CWD_WDOG.CNT, need addition shift of 8.
> > > +	 */
> > > +	regval = readq(priv->base + GTI_CWD_WDOG);
> > > +	regval &= GTI_CWD_WDOG_MODE_MASK;
> > > +	regval |= (timeout_wdog << (GTI_CWD_WDOG_CNT_SHIFT + 8)) |
> > > +		   (timeout_wdog << GTI_CWD_WDOG_LEN_SHIFT);
> > > +	writeq(regval, priv->base + GTI_CWD_WDOG);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int gti_wdt_set_pretimeout(struct watchdog_device *wdev,
> > > +					unsigned int timeout)
> > > +{
> > > +	struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > +	struct watchdog_device *wdog_dev = &priv->wdev;
> > > +
> > > +	/* pretimeout should 1/3 of max_timeout */
> > > +	if ((timeout * 3) <= wdog_dev->max_timeout)
> >
> > Unnecessary ()
> >
> > > +		return gti_wdt_settimeout(wdev, timeout * 3);
> > > +
> > > +	return -EINVAL;
> > > +}
> > > +
> > > +static const struct watchdog_info gti_wdt_ident = {
> > > +	.identity = "Marvell GTI watchdog",
> > > +	.options = WDIOF_SETTIMEOUT | WDIOF_PRETIMEOUT |
> > WDIOF_KEEPALIVEPING |
> > > +		   WDIOF_MAGICCLOSE | WDIOF_CARDRESET, };
> > > +
> > > +static const struct watchdog_ops gti_wdt_ops = {
> > > +	.owner = THIS_MODULE,
> > > +	.start = gti_wdt_start,
> > > +	.stop = gti_wdt_stop,
> > > +	.ping = gti_wdt_ping,
> > > +	.set_timeout = gti_wdt_settimeout,
> > > +	.set_pretimeout = gti_wdt_set_pretimeout, };
> > > +
> > > +static int gti_wdt_probe(struct platform_device *pdev) {
> > > +	struct gti_wdt_priv *priv;
> > > +	struct device *dev = &pdev->dev;
> > > +	struct watchdog_device *wdog_dev;
> > > +	int irq;
> > > +	int err;
> > > +
> > > +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > > +	if (!priv)
> > > +		return -ENOMEM;
> > > +
> > > +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> > > +	if (IS_ERR(priv->base))
> > > +		return dev_err_probe(&pdev->dev, PTR_ERR(priv->base),
> > > +			      "reg property not valid/found\n");
> > > +
> > > +	priv->clock_freq = arch_timer_get_cntfrq();
> >
> > arch_timer_get_cntfrq() returns u32. Storing it as u64 to save a
> > couple of typecasts really doesn't add value.
> >
> > Note that this limits compilability to arm and arm64.
> 
> Will remove using arch_timer_get_cntfrq() and clock reference in device tree.
> 
> >
> > > +
> > > +	wdog_dev = &priv->wdev;
> > > +	wdog_dev->info = &gti_wdt_ident,
> > > +	wdog_dev->ops = &gti_wdt_ops,
> > > +	wdog_dev->parent = dev;
> > > +	/*
> > > +	 * Watchdog counter is 24 bit where lower 8 bits are zeros, so maximum
> > > +	 * value that can be programmed in hardware is 0xffff00. This counter
> > > +	 * decrements every one microsec.
> > > +	 * Hardware will generate interrupt on first timeout (pretimeout)
> > > +	 * reset the system on 3rd timeout.
> > > +	 * Max watchdog pretimeout can be 16 sec, so max timeout is 48 sec.
> > > +	 * Let's have min pretimeout to 1sec, so min timeout is 3sec.
> > > +	 */
> > > +	wdog_dev->max_timeout = 48;
> >
> > The code setting the actual timeout checks for overflow, suggesting
> > that the actual maximum timeout depends on the clock speed and may be
> > less than 48 seconds. If that ever happens, the actual timeout would
> > be set to less than 48 seconds, which could cause random reboots.
> 
> Will use clock for these calculation.
> 
> Thanks
> -Bharat
> 
> >
> > > +	wdog_dev->min_timeout = 3;
> > > +	wdog_dev->timeout = 30;
> > > +	wdog_dev->pretimeout = wdog_dev->timeout / 3;
> > > +
> > > +	priv->irq = irq;
> > > +	watchdog_set_drvdata(wdog_dev, priv);
> > > +	platform_set_drvdata(pdev, priv);
> > > +	gti_wdt_settimeout(wdog_dev, wdog_dev->timeout);
> > > +	watchdog_stop_on_reboot(wdog_dev);
> > > +	watchdog_stop_on_unregister(wdog_dev);
> > > +
> > > +	err = devm_watchdog_register_device(dev, wdog_dev);
> > > +	if (err)
> > > +		return err;
> > > +
> > > +	irq = platform_get_irq(pdev, 0);
> > > +	if (irq < 0)
> > > +		return dev_err_probe(&pdev->dev, irq, "IRQ resource not
> > found\n");
> > > +
> > > +	err = devm_request_irq(dev, irq, gti_wdt_interrupt, 0,
> > > +			       pdev->name, &priv->wdev);
> > > +	if (err)
> > > +		return dev_err_probe(dev, err, "Failed to register interrupt
> > > +handler\n");
> > > +
> > > +	dev_info(dev, "Watchdog enabled (timeout=%d sec)\n", wdog_dev-
> > >timeout);
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct of_device_id gti_wdt_of_match[] = {
> > > +	{ .compatible = "marvell,gti-wdt", },
> > > +	{ },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, gti_wdt_of_match);
> > > +
> > > +static struct platform_driver gti_wdt_driver = {
> > > +	.driver = {
> > > +		.name = "gti-wdt",
> > > +		.of_match_table = gti_wdt_of_match,
> > > +	},
> > > +	.probe = gti_wdt_probe,
> > > +};
> > > +module_platform_driver(gti_wdt_driver);
> > > +
> > > +MODULE_AUTHOR("Bharat Bhushan <bbhushan2@xxxxxxxxxxx>");
> > > +MODULE_DESCRIPTION("Marvell GTI watchdog driver");





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux