Hi Biju,
On Mon, Apr 24, 2023 at 6:39 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> Enable DU and link with DSI on RZ/{G2L,V2L} SMARC EVK.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
> @@ -49,6 +49,7 @@ ports {
> port@0 {
> reg = <0>;
> dsi0_in: endpoint {
> + remote-endpoint = <&du_out_dsi>;
> };
> };
>
> @@ -62,6 +63,26 @@ dsi0_out: endpoint {
> };
> };
>
> +&du {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + du_out_dsi: endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
Do you need port@1 if it is not connected to anything?
If yes, don't the port@ subnodes and reg properties belong in the
SoC-specific .dtsi?
> + };
> +};
> +
> &i2c1 {
> adv7535: hdmi@3d {
> compatible = "adi,adv7535";
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
