Re: [PATCH 3/4] Input: pwm-vibra - add support for enable GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Dienstag, 2. Mai 2023 02:47:29 CEST Dmitry Torokhov wrote:
> On Thu, Apr 27, 2023 at 10:34:28PM +0200, Luca Weiss wrote:
> > Some pwm vibrators have a dedicated enable GPIO that needs to be set
> > high so that the vibrator works. Add support for that optionally.
> 
> So this is not simply a power supply in your case controlled by a GPIO?
> We truly can have both GPIO and a separate regulator?

Yes it appears to be the EN pin on the ISA1000A, see
https://electronics.stackexchange.com/q/380475

On apq8026-lg-lenok there is a similar setup for the vibration motor although 
there I don't know whether it's actually a fixed-regulator or not, but since 
the two devices were built in a similar time (without checking further) I 
could assume they both contain the same IC.

Regards
Luca

> 
> Thanks.







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux