bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---
---
arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 6 ++++++
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 3 +++
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 12 ++++++++++++
3 files changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 581221fdadf1..719ea5d5ae88 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -11,30 +11,35 @@
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
/ {
pss_ref_clk: pss_ref_clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <33333333>;
};
video_clk: video_clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
pss_alt_ref_clk: pss_alt_ref_clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
gt_crx_ref_clk: gt_crx_ref_clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <108000000>;
};
aux_ref_clk: aux_ref_clk {
+ bootph-all;
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
@@ -43,6 +48,7 @@ aux_ref_clk: aux_ref_clk {
&zynqmp_firmware {
zynqmp_clk: clock-controller {
+ bootph-all;
#clock-cells = <1>;
compatible = "xlnx,zynqmp-clk";
clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index 78ff6a9b3144..8afdf4408a78 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -243,17 +243,20 @@ tpm@0 { /* slm9670 - U144 */
&i2c1 {
status = "okay";
+ bootph-all;
clock-frequency = <400000>;
scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+ bootph-all;
compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
reg = <0x50>;
/* WP pin EE_WP_EN connected to slg7x644092@68 */
};
eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+ bootph-all;
compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
reg = <0x51>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index d01d4334c95f..51b8349dcacd 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -127,6 +127,7 @@ rproc_1_fw_image: memory@3ef00000 {
};
zynqmp_ipi: zynqmp_ipi {
+ bootph-all;
compatible = "xlnx,zynqmp-ipi-mailbox";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
@@ -136,6 +137,7 @@ zynqmp_ipi: zynqmp_ipi {
ranges;
ipi_mailbox_pmu1: mailbox@ff9905c0 {
+ bootph-all;
reg = <0x0 0xff9905c0 0x0 0x20>,
<0x0 0xff9905e0 0x0 0x20>,
<0x0 0xff990e80 0x0 0x20>,
@@ -152,6 +154,7 @@ ipi_mailbox_pmu1: mailbox@ff9905c0 {
dcc: dcc {
compatible = "arm,dcc";
status = "disabled";
+ bootph-all;
};
pmu {
@@ -177,8 +180,10 @@ zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
#power-domain-cells = <1>;
method = "smc";
+ bootph-all;
zynqmp_power: zynqmp-power {
+ bootph-all;
compatible = "xlnx,zynqmp-power";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
@@ -258,6 +263,7 @@ r5f-1 {
amba: axi {
compatible = "simple-bus";
+ bootph-all;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -699,6 +705,7 @@ pcie_intc: legacy-interrupt-controller {
};
qspi: spi@ff0f0000 {
+ bootph-all;
compatible = "xlnx,zynqmp-qspi-1.0";
status = "disabled";
clock-names = "ref_clk", "pclk";
@@ -745,6 +752,7 @@ sata: ahci@fd0c0000 {
};
sdhci0: mmc@ff160000 {
+ bootph-all;
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
@@ -759,6 +767,7 @@ sdhci0: mmc@ff160000 {
};
sdhci1: mmc@ff170000 {
+ bootph-all;
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
@@ -851,6 +860,7 @@ ttc3: timer@ff140000 {
};
uart0: serial@ff000000 {
+ bootph-all;
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
@@ -861,6 +871,7 @@ uart0: serial@ff000000 {
};
uart1: serial@ff010000 {
+ bootph-all;
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
@@ -982,6 +993,7 @@ zynqmp_dpdma: dma-controller@fd4c0000 {
};
zynqmp_dpsub: display@fd4a0000 {
+ bootph-all;
compatible = "xlnx,zynqmp-dpsub-1.7";
status = "disabled";
reg = <0x0 0xfd4a0000 0x0 0x1000>,
--
2.36.1
