On 01/05/2023 22:34, Dmitry Baryshkov wrote:
Fully specify the clocks used by the GCC on the mdm9615 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-mdm9615.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 556abe90cf5b..e81e5e3196d9 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -106,6 +107,10 @@ gcc: clock-controller@900000 {
#power-domain-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
+ clocks = <&cxo_board>,
+ <&lcc PLL4>;
+ clock-names = "cxo",
+ "pll4";
};
lcc: clock-controller@28000000 {
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
