Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..eae3024ce003 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -222,6 +222,30 @@ &uart4 {
status = "okay";
};
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ maximum-speed = "super-speed";
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ vdd-supply = <&vreg_l4a_0p9>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l4a_0p9>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <19200000>;
};
--
2.38.1
