On 2014-11-25 at 13:16:58 +0100, Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx> wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.
>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
> Signed-off-by: Orson Zhai <orson.zhai@xxxxxxxxxxxxxx>
> Originally-by: Lanqing Liu <lanqing.liu@xxxxxxxxxxxxxx>
> ---
> Documentation/devices.txt | 3 +
> drivers/tty/serial/Kconfig | 23 ++
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/sprd_serial.c | 752 ++++++++++++++++++++++++++++++++++++++
> include/uapi/linux/serial_core.h | 3 +
> 5 files changed, 782 insertions(+)
> create mode 100644 drivers/tty/serial/sprd_serial.c
>
[...]
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1573,6 +1573,29 @@ config SERIAL_MEN_Z135
> This driver can also be build as a module. If so, the module will be called
> men_z135_uart.ko
>
> +config SERIAL_SPRD
> + tristate "Support for SPRD serial"
> + depends on ARCH_SPRD
> + select SERIAL_CORE
> + help
> + This enables the driver for the Spreadtrum's serial.
> +
> +config SERIAL_SPRD_NR
> + int "Maximum number of sprd serial ports"
> + depends on SERIAL_SPRD
> + default "4"
> +
> +config SERIAL_SPRD_CONSOLE
> + bool "SPRD UART console support"
> + depends on SERIAL_SPRD=y
> + select SERIAL_CORE_CONSOLE
> + select SERIAL_EARLYCON
> + help
> + Support for early debug console using Spreadtrum's serial. This enables
> + the console before standard serial driver is probed. This is enabled
> + with "earlycon" on the kernel command line. The console is
> + enabled when early_param is processed.
> +
> endmenu
Please consistently use tabs instead of spaces for indentation. The help
text should be indented by one tabe + 2 spaces.
[...]
> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
> new file mode 100644
> index 0000000..58214c8
> --- /dev/null
> +++ b/drivers/tty/serial/sprd_serial.c
[...]
> +static inline int handle_lsr_errors(struct uart_port *port,
> + unsigned int *flag, unsigned int *lsr)
This line should be aligned with the opening ( above.
> +{
> + int ret = 0;
> +
> + /* stastics */
> + if (*lsr & SPRD_LSR_BI) {
> + *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
> + port->icount.brk++;
> + ret = uart_handle_break(port);
> + if (ret)
> + return ret;
> + } else if (*lsr & SPRD_LSR_PE)
> + port->icount.parity++;
> + else if (*lsr & SPRD_LSR_FE)
> + port->icount.frame++;
> + if (*lsr & SPRD_LSR_OE)
> + port->icount.overrun++;
> +
> + /* mask off conditions which should be ignored */
> + *lsr &= port->read_status_mask;
> + if (*lsr & SPRD_LSR_BI)
> + *flag = TTY_BREAK;
> + else if (*lsr & SPRD_LSR_PE)
> + *flag = TTY_PARITY;
> + else if (*lsr & SPRD_LSR_FE)
> + *flag = TTY_FRAME;
> +
> + return ret;
> +}
> +
> +static inline void sprd_rx(int irq, void *dev_id)
> +{
> + struct uart_port *port = (struct uart_port *)dev_id;
No need to cast a void pointer.
> + struct tty_port *tty = &port->state->port;
> + unsigned int ch, flag, lsr, max_count = 2048;
> +
> + while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
> + lsr = serial_in(port, SPRD_LSR);
> + ch = serial_in(port, SPRD_RXD);
> + flag = TTY_NORMAL;
> + port->icount.rx++;
> +
> + if (unlikely(lsr & (SPRD_LSR_BI | SPRD_LSR_PE
> + | SPRD_LSR_FE | SPRD_LSR_OE)))
> + if (handle_lsr_errors(port, &lsr, &flag))
> + continue;
> + if (uart_handle_sysrq_char(port, ch))
> + continue;
> +
> + uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
> + }
> +
> + tty_flip_buffer_push(tty);
> +}
[...]
> +static void sprd_console_write(struct console *co, const char *s,
> + unsigned int count)
> +{
> + struct uart_port *port = (struct uart_port *)sprd_port[co->index];
Better explicitly access the .port member of sprd_port[co->index] here
instead of casting.
> + int ien;
> + int locked = 1;
> +
> + if (oops_in_progress)
> + locked = spin_trylock(&port->lock);
> + else
> + spin_lock(&port->lock);
> + /* save the IEN then disable the interrupts */
> + ien = serial_in(port, SPRD_IEN);
> + serial_out(port, SPRD_IEN, 0x0);
> +
> + uart_console_write(port, s, count, sprd_console_putchar);
> +
> + /* wait for transmitter to become empty and restore the IEN */
> + wait_for_xmitr(port);
> + serial_out(port, SPRD_IEN, ien);
> + if (locked)
> + spin_unlock(&port->lock);
> +}
> +
> +static int __init sprd_console_setup(struct console *co, char *options)
> +{
> + struct uart_port *port;
> + int baud = 115200;
> + int bits = 8;
> + int parity = 'n';
> + int flow = 'n';
> +
> + if (unlikely(co->index >= UART_NR_MAX || co->index < 0))
> + co->index = 0;
> +
> + port = (struct uart_port *)sprd_port[co->index];
Same here, use the .port member of struct sprd_port[co->index].
> + if (port == NULL) {
> + pr_info("srial port %d not yet initialized\n", co->index);
Typo: should be serial instead of srial.
> + return -ENODEV;
> + }
> + if (options)
> + uart_parse_options(options, &baud, &parity, &bits, &flow);
> +
> + return uart_set_options(port, co, baud, parity, bits, flow);
> +}
[...]
> +static int sprd_probe(struct platform_device *pdev)
> +{
> + struct resource *mem;
> + struct device_node *np = pdev->dev.of_node;
> + struct uart_port *up;
> + struct clk *clk;
> + int irq;
> +
> +
> + if (np)
> + pdev->id = of_alias_get_id(np, "serial");
> +
> + if (unlikely(pdev->id < 0 || pdev->id >= UART_NR_MAX)) {
> + dev_err(&pdev->dev, "does not support id %d\n", pdev->id);
> + return -ENXIO;
> + }
> +
> + sprd_port[pdev->id] = devm_kzalloc(&pdev->dev,
> + sizeof(*sprd_port[pdev->id]), GFP_KERNEL);
> + if (!sprd_port[pdev->id])
> + return -ENOMEM;
> +
> + up = (struct uart_port *)sprd_port[pdev->id];
> + up->dev = &pdev->dev;
> + up->line = pdev->id;
> + up->type = PORT_SPRD;
> + up->iotype = SERIAL_IO_PORT;
> + up->uartclk = SPRD_DEF_RATE;
> + up->fifosize = SPRD_FIFO_SIZE;
> + up->ops = &serial_sprd_ops;
> + up->flags = ASYNC_BOOT_AUTOCONF;
> +
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (!IS_ERR(clk))
> + up->uartclk = clk_get_rate(clk);
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (unlikely(!mem)) {
> + dev_err(&pdev->dev, "not provide mem resource\n");
> + return -ENODEV;
> + }
> + up->mapbase = mem->start;
> + up->membase = ioremap(mem->start, resource_size(mem));
Return value of ioremap() should be checked for NULL.
> +
> + irq = platform_get_irq(pdev, 0);
> + if (unlikely(irq < 0)) {
> + dev_err(&pdev->dev, "not provide irq resource\n");
> + return -ENODEV;
> + }
> + up->irq = irq;
> +
> + platform_set_drvdata(pdev, up);
> +
> + return uart_add_one_port(&sprd_uart_driver, up);
> +}
> +
> +static int sprd_remove(struct platform_device *dev)
> +{
> + struct uart_port *up = platform_get_drvdata(dev);
> +
> + return uart_remove_one_port(&sprd_uart_driver, up);
> +}
> +
> +static int sprd_suspend(struct platform_device *dev, pm_message_t state)
> +{
> + int id = dev->id;
> + struct uart_port *port = (struct uart_port *)sprd_port[id];
> + struct reg_backup *reg_bak = &(sprd_port[id]->reg_bak);
> +
> + reg_bak->ien = serial_in(port, SPRD_IEN);
> + reg_bak->ctrl0 = serial_in(port, SPRD_LCR);
> + reg_bak->ctrl1 = serial_in(port, SPRD_CTL1);
> + reg_bak->ctrl2 = serial_in(port, SPRD_CTL2);
> + reg_bak->clkd0 = serial_in(port, SPRD_CLKD0);
> + reg_bak->clkd1 = serial_in(port, SPRD_CLKD1);
> +
> + return 0;
> +}
> +
> +static int sprd_resume(struct platform_device *dev)
> +{
> + int id = dev->id;
> + struct uart_port *port = (struct uart_port *)sprd_port[id];
Access the .port member instead of the cast.
> + struct reg_backup *reg_bak = &(sprd_port[id]->reg_bak);
> +
> + serial_out(port, SPRD_LCR, reg_bak->ctrl0);
> + serial_out(port, SPRD_CTL1, reg_bak->ctrl1);
> + serial_out(port, SPRD_CTL2, reg_bak->ctrl2);
> + serial_out(port, SPRD_CLKD0, reg_bak->clkd0);
> + serial_out(port, SPRD_CLKD1, reg_bak->clkd1);
> + serial_out(port, SPRD_IEN, reg_bak->ien);
> +
> + return 0;
> +}
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
