Switch on USB orientation-switching for usb_1_qmp via TCPM. Detecting the orientation switch is required to get the PHY to reset and bring-up the PHY with the CC lines set to the appropriate lane. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index b5cc45358a474..8935a8e327904 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -1295,6 +1295,14 @@ &usb_1_qmpphy { vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p92>; + orientation-switch; + ports { + port@1 { + qmpphy_typec_mux_in: endpoint { + remote-endpoint = <&pm8150b_typec_mux_out>; + }; + }; + }; }; &usb_2 { @@ -1375,6 +1383,12 @@ pm8150b_role_switch_out: endpoint { remote-endpoint = <&dwc3_role_switch_in>; }; }; + port@1 { + reg = <1>; + pm8150b_typec_mux_out: endpoint { + remote-endpoint = <&qmpphy_typec_mux_in>; + }; + }; }; }; }; -- 2.39.2