[PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..5a5294cc6e45 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
 };
 
 &sdhc_1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+
 	vmmc-supply = <&vreg_l24a_2p96>;
 	vqmmc-supply = <&vreg_l11a_1p8>;
 	no-sdio;
@@ -200,6 +204,10 @@ &sdhc_1 {
 
 &sdhc_2 {
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+
 	vmmc-supply = <&vreg_l22a_2p96>;
 	vqmmc-supply = <&vreg_l5a_2p96>;
 	no-sdio;
@@ -216,6 +224,13 @@ &tlmm {
 			       <49 1>, <52 1>, <54 1>,
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart4 {
-- 
2.38.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux