On 27/04/2023 21:34, Luca Weiss wrote:
The Nexus 5 has a vibrator connected to the clock output of GP1_CLK which we can use with the clk-pwm driver, then we can use that pwm with pwm-vibrator to get haptics functionality. This patch is based on Brian Masney's previous patch with clk-vibrator. Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
Reviewed-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
--- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ab35f2d644c0..fea8a6be9021 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -41,6 +41,25 @@ key-volume-down { }; };+ clk_pwm: pwm {+ compatible = "clk-pwm"; + clocks = <&mmcc CAMSS_GP1_CLK>; + + pinctrl-0 = <&vibrator_pin>; + pinctrl-names = "default"; + + #pwm-cells = <2>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <&pm8941_l19>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed";@@ -637,6 +656,22 @@ shutdown-pins {function = "gpio"; }; }; + + vibrator_pin: vibrator-state { + core-pins { + pins = "gpio27"; + function = "gp1_clk"; + drive-strength = <6>; + bias-disable; + }; + + enable-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; };&usb {
