Signal names are one-to-one copies from the schematics, except VBUS
which is an unnamed signal there.
Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
arch/arm/boot/dts/at91-tse850-3.dts | 60 +++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index b99a4fb44a36..13d92797ada6 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -300,3 +300,63 @@
dmas = <0>, <0>; /* Do not use DMA for dbgu */
};
+
+&pioA {
+ gpio-line-names =
+/* 0 */ "SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+/* 4 */ "", "/RFRST", "", "",
+/* 8 */ "/ADD", "", "/LOOP1", "/LOOP2",
+/* 12 */ "", "", "", "",
+/* 16 */ "LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+/* 20 */ "LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+/* 24 */ "", "", "", "",
+/* 28 */ "", "", "SDA", "SCL";
+};
+
+&pioB {
+ gpio-line-names =
+/* 0 */ "", "", "", "",
+/* 4 */ "", "", "", "",
+/* 8 */ "", "", "", "",
+/* 12 */ "", "", "", "",
+/* 16 */ "", "", "", "",
+/* 20 */ "", "", "", "",
+/* 24 */ "", "", "SIG<LIN", "SIG>LIN",
+/* 28 */ "RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+ gpio-line-names =
+/* 0 */ "ETX0", "ETX1", "ERX0", "ERX1",
+/* 4 */ "ETXEN", "ECRSDV", "ERXER", "EREFCK",
+/* 8 */ "EMDC", "EMDIO", "", "",
+/* 12 */ "", "", "", "/ILIM",
+/* 16 */ "BCK", "LRCK", "DIN", "",
+/* 20 */ "", "", "", "",
+/* 24 */ "", "", "", "",
+/* 28 */ "", "", "", "VBUS";
+};
+
+&pioD {
+ gpio-line-names =
+/* 0 */ "I1", "I2", "O1", "EXTVEN",
+/* 4 */ "", "456KHZ", "VCTRL", "SYNCSEL",
+/* 8 */ "STEREO", "", "", "",
+/* 12 */ "", "", "", "",
+/* 16 */ "", ">LIN", "LIN>", "",
+/* 20 */ "VREFEN", "", "", "",
+/* 24 */ "", "", "VINOK", "",
+/* 28 */ "POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+ gpio-line-names =
+/* 0 */ "", "", "", "",
+/* 4 */ "", "", "", "",
+/* 8 */ "", "", "", "",
+/* 12 */ "", "", "", "",
+/* 16 */ "", "", "", "",
+/* 20 */ "", "ALE", "CLE", "",
+/* 24 */ "", "", "", "",
+/* 28 */ "", "", "", "/ETHINT";
+};
--
2.20.1
