This patch series incorporates the following changes:
- Extend brcmstb reset driver to work on MIPS (currently ARM-only).
- Extend brcmstb GISB bus driver to work on MIPS (currently ARM-only).
- Extend brcmstb GISB bus driver to work on BE systems (currently LE-only).
- Extend both drivers to support the older register layouts used on many
of the BMIPS platforms.
- Extend {ohci,ehci}-platform drivers to accept the new "native-endian"
DT property, to accommodate BCM7xxx platforms that can be switched
between LE/BE with a board jumper.
Dependencies:
power/reset: brcmstb: Register with kernel restart handler (Guenter Roeck)
of: Add helper function to check MMIO register endianness (Kevin Cernekee)
These are both tentatively accepted, but might not be present in the same
tree yet. As such, we might want to "review now, merge later."
Kevin Cernekee (9):
power/reset: brcmstb: Make the driver buildable on MIPS
power/reset: brcmstb: Use the DT "compatible" string to indicate bit
positions
power/reset: brcmstb: Add support for old 65nm chips
bus: brcmstb_gisb: Make the driver buildable on MIPS
bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
bus: brcmstb_gisb: Look up register offsets in a table
bus: brcmstb_gisb: Add register offset tables for older chips
bus: brcmstb_gisb: Honor the "big-endian" and "native-endian" DT
properties
usb: {ohci,ehci}-platform: Use new OF big-endian helper function
.../devicetree/bindings/arm/brcm-brcmstb.txt | 4 +-
.../devicetree/bindings/bus/brcm,gisb-arb.txt | 6 +-
Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +
Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 127 ++++++++++++++++++---
drivers/power/reset/Kconfig | 9 +-
drivers/power/reset/brcmstb-reboot.c | 41 +++++--
drivers/usb/host/ehci-platform.c | 2 +-
drivers/usb/host/ohci-platform.c | 2 +-
10 files changed, 161 insertions(+), 36 deletions(-)
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
