Hi Shazad,
On Fri, Apr 21, 2023 at 07:09:15PM +0530, Shazad Hussain wrote:
Update relavent DT bindings for USB, add new config to the phy driver,
add USB and PHY nodes to the .dtsi and enable them in the board .dts
for the sa8775p-ride platform.
Shazad Hussain (6):
dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY
binding
phy: qcom-qmp: Add SA8775P USB3 UNI phy
arm64: dts: qcom: sa8775p: add USB nodes
arm64: dts: qcom: sa8775p-ride: enable USB nodes
.../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 1 +
.../bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
.../devicetree/bindings/usb/qcom,dwc3.yaml | 5 +
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 92 +++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 239 +++++++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 45 ++++
6 files changed, 381 insertions(+), 2 deletions(-)
--
2.17.1
Thanks for posting this. I tested the series on the sa8775p, and it seems
initialization for the controller at a400000 sometimes fails with a
timeout (-110) error:
dwc3 a400000.usb: Adding to iommu group 2
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 1
xhci-hcd xhci-hcd.0.auto: can't setup: -110
xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
xhci-hcd: probe of xhci-hcd.0.auto failed with error -110
dwc3 a600000.usb: Adding to iommu group 3
dwc3 a800000.usb: Adding to iommu group 4
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus
number 1
xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110
quirks 0x0000000000010010
xhci-hcd xhci-hcd.1.auto: irq 162, io mem 0x0a800000
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus
number 2
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
In this case, only usb devices for a800000 are showing:
dracut:/# ls -alh /sys/bus/usb/devices
total 0
drwxr-xr-x 2 root root 0 Feb 27 00:00 .
drwxr-xr-x 4 root root 0 Feb 27 00:00 ..
lrwxrwxrwx 1 root root 0 Feb 27 00:00 1-0:1.0 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb1/1-0:1.0
lrwxrwxrwx 1 root root 0 Feb 27 00:00 2-0:1.0 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb2/2-0:1.0
lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb1 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb1
lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb2 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb2
This happens approximately 1 out of 2 reboots. Here's the kernel output
when initialization succeeds:
dwc3 a600000.usb: Adding to iommu group 2
dwc3 a800000.usb: Adding to iommu group 3
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0110ffc5 hci version 0x110
quirks 0x0000000000010010
xhci-hcd xhci-hcd.0.auto: irq 161, io mem 0x0a800000
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
dwc3 a400000.usb: Adding to iommu group 4
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus
number 3
xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110
quirks 0x0000000000010010
xhci-hcd xhci-hcd.1.auto: irq 162, io mem 0x0a400000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
And the list of usb devices:
dracut:/# ls -alh /sys/bus/usb/devices
total 0
drwxr-xr-x 2 root root 0 Feb 27 00:00 .
drwxr-xr-x 4 root root 0 Feb 27 00:00 ..
lrwxrwxrwx 1 root root 0 Feb 27 00:00 1-0:1.0 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb1/1-0:1.0
lrwxrwxrwx 1 root root 0 Feb 27 00:00 2-0:1.0 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb2/2-0:1.0
lrwxrwxrwx 1 root root 0 Feb 27 00:00 3-0:1.0 ->
../../../devices/platform/soc@0/a4f8800.usb/a400000.usb/xhci-hcd.1.auto/usb3/3-0:1.0
lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb1 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb1
lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb2 ->
../../../devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb2
lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb3 ->
../../../devices/platform/soc@0/a4f8800.usb/a400000.usb/xhci-hcd.1.auto/usb3
Have you also encountered this?
