Re: [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 24, 2023 at 02:17:06PM +0300, Dmitry Baryshkov wrote:
> On Mon, 24 Apr 2023 at 12:04, Varadarajan Narayanan
> <quic_varada@xxxxxxxxxxx> wrote:
> >
> > On Sat, Apr 22, 2023 at 12:07:01AM +0300, Dmitry Baryshkov wrote:
> > > On 05/04/2023 14:41, Varadarajan Narayanan wrote:
> > > >Add USB phy and controller related nodes
> > > >
> > > >Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > > >---
> > > >  Changes in v8:
> > > >     - Change clocks order to match the bindings
> > > >  Changes in v7:
> > > >     - Change com_aux -> cfg_ahb
> > > >  Changes in v6:
> > > >     - Introduce fixed regulators for the phy
> > > >     - Resolved all 'make dtbs_check' messages
> > > >
> > > >  Changes in v5:
> > > >     - Fix additional comments
> > > >     - Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> > > >     - 'make dtbs_check' giving the following messages since
> > > >       ipq9574 doesn't have power domains. Hope this is ok
> > > >
> > > >             /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
> > > >             From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> > > >             /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
> > > >             From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> > > >
> > > >  Changes in v4:
> > > >     - Use newer bindings without subnodes
> > > >     - Fix coding style issues
> > > >
> > > >  Changes in v3:
> > > >     - Insert the nodes at proper location
> > > >
> > > >  Changes in v2:
> > > >     - Fixed issues flagged by Krzysztof
> > > >     - Fix issues reported by make dtbs_check
> > > >     - Remove NOC related clocks (to be added with proper
> > > >       interconnect support)
> > > >---
> > > >  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 120 insertions(+)
> > > >
> > > >diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > > >index 43a3dbe..1242382 100644
> > > >--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > > >+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > > >@@ -150,6 +150,33 @@
> > > >             method = "smc";
> > > >     };
> > > >+    reg_usb_3p3: s3300 {
> > >
> > > The node names do not look generic enough. Please take a look at other
> > > platforms.
> >
> > Please see below.
> >
> > > >+            compatible = "regulator-fixed";
> > > >+            regulator-min-microvolt = <3300000>;
> > > >+            regulator-max-microvolt = <3300000>;
> > > >+            regulator-boot-on;
> > > >+            regulator-always-on;
> > > >+            regulator-name = "usb-phy-vdd-dummy";
> > >
> > > This also doesn't look correct. This regulator should not just fill the gap.
> > > Does it represent a generic voltage network on the board?
> > >
> > > Please do not add 'dummy' voltage regulators if there is no real voltage
> > > wire.
> >
> > These are real voltage wires. I used dummy since they are
> > always-on and cannot be increased/decreased (i.e. fixed).
> > Would something along the following lines be appropriate?
>
> Still not fully correct. Please use regulator name that corresponds to
> the power grid on the board schematics. I don't think that you have a
> separate power grids for USB PHY.
>
> >
> >         vreg_ae10_3p3: s3300 {
>
> Naming suggests that these voltages are generated by some PMIC. Is
> this correct? If so, please describe the PMIC instead.

SS PHY needs two supplies and HS PHY needs three supplies. 3.3V
and 0.925V are from fixed DC - DC regulators and 1.8V is
generated from MP5496 PMIC. Would the following node definitions
be ok?

usb_hs_vreg0: usb_hs_vreg0 {
	compatible = "regulator-fixed";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;
	regulator-always-on;
	regulator-name = "usb-phy-vdd";
};

usb_hs_vreg1: usb_hs_vreg1 {
	compatible = "regulator-fixed";
	regulator-min-microvolt = <925000>;
	regulator-max-microvolt = <925000>;
	regulator-boot-on;
	regulator-always-on;
	regulator-name = "usb-phy";
};

&rpm_requests {
	regulators {
		compatible = "qcom,rpm-mp5496-regulators";
		.
		.
		.
		ipq9574_l2: l2 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-boot-on;
			regulator-always-on;
		};
	};
};

Thanks
Varada

> >                 compatible = "regulator-fixed";
> >                 regulator-min-microvolt = <3300000>;
> >                 regulator-max-microvolt = <3300000>;
> >                 regulator-boot-on;
> >                 regulator-always-on;
> >                 regulator-name = "usb-phy-vdd";
> >         };
> >
> >         vreg_ad8_1p8: s1800 {
> >                 compatible = "regulator-fixed";
> >                 regulator-min-microvolt = <1800000>;
> >                 regulator-max-microvolt = <1800000>;
> >                 regulator-boot-on;
> >                 regulator-always-on;
> >                 regulator-name = "usb-phy-pll";
> >         };
> >
> >         vreg_ad9_0p925: s0925 {
> >                 compatible = "regulator-fixed";
> >                 regulator-min-microvolt = <925000>;
> >                 regulator-max-microvolt = <925000>;
> >                 regulator-boot-on;
> >                 regulator-always-on;
> >                 regulator-name = "usb-phy";
> >         };
> >
> > Thanks
> > Varada
> >
> > > >+    };
> > > >+
> > > >+    reg_usb_1p8: s1800 {
> > > >+            compatible = "regulator-fixed";
> > > >+            regulator-min-microvolt = <1800000>;
> > > >+            regulator-max-microvolt = <1800000>;
> > > >+            regulator-boot-on;
> > > >+            regulator-always-on;
> > > >+            regulator-name = "usb-phy-pll-dummy";
> > > >+    };
> > > >+
> > > >+    reg_usb_0p925: s0925 {
> > > >+            compatible = "regulator-fixed";
> > > >+            regulator-min-microvolt = <925000>;
> > > >+            regulator-max-microvolt = <925000>;
> > > >+            regulator-boot-on;
> > > >+            regulator-always-on;
> > > >+            regulator-name = "usb-phy-dummy";
> > > >+    };
> > > >+
> > > >     reserved-memory {
> > > >             #address-cells = <2>;
> > > >             #size-cells = <2>;
> > > >@@ -179,6 +206,52 @@
> > > >             #size-cells = <1>;
> > > >             ranges = <0 0 0 0xffffffff>;
> > > >+            usb_0_qusbphy: phy@7b000 {
> > > >+                    compatible = "qcom,ipq9574-qusb2-phy";
> > > >+                    reg = <0x0007b000 0x180>;
> > > >+                    #phy-cells = <0>;
> > > >+
> > > >+                    clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > > >+                             <&xo_board_clk>;
> > > >+                    clock-names = "cfg_ahb",
> > > >+                                  "ref";
> > > >+
> > > >+                    vdd-supply = <&reg_usb_0p925>;
> > > >+                    vdda-pll-supply = <&reg_usb_1p8>;
> > > >+                    vdda-phy-dpdm-supply = <&reg_usb_3p3>;
> > > >+
> > > >+                    resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> > > >+                    status = "disabled";
> > > >+            };
> > > >+
> > > >+            usb_0_qmpphy: phy@7d000 {
> > > >+                    compatible = "qcom,ipq9574-qmp-usb3-phy";
> > > >+                    reg = <0x0007d000 0xa00>;
> > > >+                    #phy-cells = <0>;
> > > >+
> > > >+                    clocks = <&gcc GCC_USB0_AUX_CLK>,
> > > >+                             <&xo_board_clk>,
> > > >+                             <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> > > >+                             <&gcc GCC_USB0_PIPE_CLK>;
> > > >+                    clock-names = "aux",
> > > >+                                  "ref",
> > > >+                                  "cfg_ahb",
> > > >+                                  "pipe";
> > > >+
> > > >+                    resets = <&gcc GCC_USB0_PHY_BCR>,
> > > >+                             <&gcc GCC_USB3PHY_0_PHY_BCR>;
> > > >+                    reset-names = "phy",
> > > >+                                  "phy_phy";
> > > >+
> > > >+                    vdda-pll-supply = <&reg_usb_1p8>;
> > > >+                    vdda-phy-supply = <&reg_usb_0p925>;
> > > >+
> > > >+                    status = "disabled";
> > > >+
> > > >+                    #clock-cells = <0>;
> > > >+                    clock-output-names = "usb0_pipe_clk";
> > > >+            };
> > > >+
> > > >             pcie0_phy: phy@84000 {
> > > >                     compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
> > > >                     reg = <0x00084000 0x1000>;
> > > >@@ -548,6 +621,53 @@
> > > >                     status = "disabled";
> > > >             };
> > > >+            usb3: usb@8a00000 {
> > > >+                    compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> > > >+                    reg = <0x08af8800 0x400>;
> > > >+                    #address-cells = <1>;
> > > >+                    #size-cells = <1>;
> > > >+                    ranges;
> > > >+
> > > >+                    clocks = <&gcc GCC_SNOC_USB_CLK>,
> > > >+                             <&gcc GCC_USB0_MASTER_CLK>,
> > > >+                             <&gcc GCC_ANOC_USB_AXI_CLK>,
> > > >+                             <&gcc GCC_USB0_SLEEP_CLK>,
> > > >+                             <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > > >+
> > > >+                    clock-names = "cfg_noc",
> > > >+                                  "core",
> > > >+                                  "iface",
> > > >+                                  "sleep",
> > > >+                                  "mock_utmi";
> > > >+
> > > >+                    assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> > > >+                                      <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > > >+                    assigned-clock-rates = <200000000>,
> > > >+                                           <24000000>;
> > > >+
> > > >+                    interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> > > >+                    interrupt-names = "pwr_event";
> > > >+
> > > >+                    resets = <&gcc GCC_USB_BCR>;
> > > >+                    status = "disabled";
> > > >+
> > > >+                    dwc_0: usb@8a00000 {
> > > >+                            compatible = "snps,dwc3";
> > > >+                            reg = <0x8a00000 0xcd00>;
> > > >+                            clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> > > >+                            clock-names = "ref";
> > > >+                            interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> > > >+                            phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
> > > >+                            phy-names = "usb2-phy", "usb3-phy";
> > > >+                            tx-fifo-resize;
> > > >+                            snps,is-utmi-l1-suspend;
> > > >+                            snps,hird-threshold = /bits/ 8 <0x0>;
> > > >+                            snps,dis_u2_susphy_quirk;
> > > >+                            snps,dis_u3_susphy_quirk;
> > > >+                            dr_mode = "host";
> > > >+                    };
> > > >+            };
> > > >+
> > > >             intc: interrupt-controller@b000000 {
> > > >                     compatible = "qcom,msm-qgic2";
> > > >                     reg = <0x0b000000 0x1000>,  /* GICD */
> > >
> > > --
> > > With best wishes
> > > Dmitry
> > >
>
>
>
> --
> With best wishes
> Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux