Hi,
On 31/03/2023 12:00, Ravi Gunasekaran wrote:
> From: Aswath Govindraju <a-govindraju@xxxxxx>
>
> Add support for two instance of OSPI in J721S2 SoC.
>
> Reviewed-by: Vaishnav Achath <vaishnav.a@xxxxxx>
> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
> Signed-off-by: Matt Ranostay <mranostay@xxxxxx>
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
> ---
> Changes from v13:
> * No changes. Only rebased on top of linux-next
>
> Changes from v12:
> * Disabled only nodes that need additional info
>
> Changes from v11:
> * Cleaned up comments
>
> Changes from v10:
> * Documented the reason for disabling the nodes by default.
> * Removed Link tag from commmit message
>
> Changes from v9:
> * Disabled fss, ospi nodes by default in common DT file
>
> Changes from v8:
> * Updated "ranges" property to fix dtbs warnings
>
> Changes from v7:
> * Removed "reg" property from syscon node
> * Renamed the "syscon" node to "bus" to after change in
> compatible property
>
> Changes from v6:
> * Fixed the syscon node's compatible property
>
> Changes from v5:
> * Updated the syscon node's compatible property
> * Removed Cc tags from commit message
>
> Changes from v4:
> * No change
>
> Changes from v3:
> * No change
>
> Changes from v2:
> * No change
>
> Changes from v1:
> * No change
>
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 44 +++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index a353705a7463..6e981fe4727e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -379,4 +379,48 @@
> compatible = "ti,am3359-adc";
> };
> };
> +
> + fss: bus@47000000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
> + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
> + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
> +
> + ospi0: spi@47040000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47040000 0x00 0x100>,
> + <0x05 0x00000000 0x01 0x00000000>;
> + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 109 5>;
> + assigned-clocks = <&k3_clks 109 5>;
> + assigned-clock-parents = <&k3_clks 109 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled"; /* Needs pinmux */
> + };
> +
> + ospi1: spi@47050000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47050000 0x00 0x100>,
> + <0x07 0x00000000 0x01 0x00000000>;
> + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 110 5>;
What about clock parent and clock rate assignment like it was done for osip0?
> + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled"; /* Needs pinmux */
> + };
> + };
> };
cheers,
-roger
