fss node claims to be entirely a syscon node, but it is really two
parts of it - one a syscon that controls the hbmc mux and a simple bus
where ospi, hbmc peripherals are located. So model it accordingly by
splitting the node up and using ti,j721e-system-controller to describe
the syscon
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 21 +++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index b58a31371bf3..7653cb191be1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -338,18 +338,27 @@ mcu_spi2: spi@40320000 {
status = "disabled";
};
- fss: syscon@47000000 {
- compatible = "syscon", "simple-mfd";
+ hbmc_syscon: syscon@47000000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
reg = <0x00 0x47000000 0x00 0x100>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x47000000 0x100>;
- hbmc_mux: hbmc-mux {
+ hbmc_mux: mux-controller@4 {
compatible = "mmio-mux";
+ reg = <0x4 0x2>;
#mux-control-cells = <1>;
mux-reg-masks = <0x4 0x2>; /* HBMC select */
};
+ };
+
+ fss: bus@47030000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x47030000 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
hbmc: hyperbus@47034000 {
compatible = "ti,am654-hbmc";
--
2.40.0
