On Sun, Nov 23, 2014 at 01:54:43PM +0100, Hans de Goede wrote: > The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, > rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG > controller), ethernet, 3.5 mm jack with a/v out and hdmi out: > > http://www.geekbuying.com/item/CS908-Allwinner-A31S-Quad-Core-1-2GHz-Android-4-4-Mini-TV-Box-HDMI-HDD-Player-1G-8G-WIFI-Miracast---Black-333395.html > > Note it has no sdcard slot and therefore can only be fel booted. Thanks a lot for working on this! I also bought another board with an A31s, but it ended up having neither USB OTG or MMC, which rendered it pretty useless. I wonder wether to put URL in the commit log is the right thing though. It's most likely to be dead in a very near future. The cover letter would be a better fit for that. > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/sun6i-a31s-cs908.dts | 109 +++++++++++++++++++++++++++++++++ > 2 files changed, 111 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/sun6i-a31s-cs908.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 8ebfa76..0c0201c 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -434,7 +434,8 @@ dtb-$(CONFIG_MACH_SUN6I) += \ > sun6i-a31-app4-evb1.dtb \ > sun6i-a31-colombus.dtb \ > sun6i-a31-hummingbird.dtb \ > - sun6i-a31-m9.dtb > + sun6i-a31-m9.dtb \ > + sun6i-a31s-cs908.dtb > dtb-$(CONFIG_MACH_SUN7I) += \ > sun7i-a20-bananapi.dtb \ > sun7i-a20-cubieboard2.dtb \ > diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts > new file mode 100644 > index 0000000..48d3a70 > --- /dev/null > +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts > @@ -0,0 +1,109 @@ > +/* > + * Copyright 2014 Hans de Goede <hdegoede@xxxxxxxxxx> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this library; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA s/library/file/ > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +/include/ "sun6i-a31s.dtsi" > + > +/ { > + model = "CSQ CS908 top set box"; Shouldn't it be Set Top Box instead? > + compatible = "csq,cs908", "allwinner,sun6i-a31s"; > + > + chosen { > + bootargs = "earlyprintk console=ttyS0,115200"; > + }; > + > + soc@01c00000 { > + usbphy: phy@01c19400 { > + status = "okay"; > + }; > + > + ehci0: usb@01c1a000 { > + status = "okay"; > + }; > + > + ehci1: usb@01c1b000 { > + status = "okay"; > + }; > + > + ohci1: usb@01c1b400 { > + status = "okay"; > + }; > + > + pio: pinctrl@01c20800 { > + usb1_vbus_pin_csq908: usb1_vbus_pin@0 { > + allwinner,pins = "PC27"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <0>; > + allwinner,pull = <0>; > + }; > + }; > + > + uart0: serial@01c28000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > + }; > + > + gmac: ethernet@01c30000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&gmac_pins_mii_a>; > + phy = <&phy1>; > + phy-mode = "mii"; > + status = "okay"; > + > + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > + }; > + > + ir@01f02000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ir_pins_a>; > + status = "okay"; > + }; > + }; > +}; > -- > 2.1.0 > -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
