On Sun, 23 Apr 2023 14:40:18 +0200, Stanislav Jakubek wrote: > Convert Broadcom Kona family I2C bindings to DT schema. > > Changes during conversion: > - add used, but previously undocumented SoC-specific compatibles > - drop references to SoCs that are not upstream > - add supported clock frequencies according to the Linux driver [1] > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/busses/i2c-bcm-kona.c#n731 > > Signed-off-by: Stanislav Jakubek <stano.jakubek@xxxxxxxxx> > --- > Changes in v2: > - add missing arm-gic.h include > - fix indentation to 4 spaces > > .../devicetree/bindings/i2c/brcm,kona-i2c.txt | 35 ----------- > .../bindings/i2c/brcm,kona-i2c.yaml | 59 +++++++++++++++++++ > 2 files changed, 59 insertions(+), 35 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt > create mode 100644 Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/72ba28004afb733224f7294a146fc2a6a5a834a7.1682252615.git.stano.jakubek@xxxxxxxxx i2c@16000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@16000: compatible: ['brcm,kona-i2c'] is too short arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@17000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@17000: compatible: ['brcm,kona-i2c'] is too short arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@18000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@18000: compatible: ['brcm,kona-i2c'] is too short arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@1c000: compatible:0: 'brcm,kona-i2c' is not one of ['brcm,bcm11351-i2c', 'brcm,bcm21664-i2c', 'brcm,bcm23550-i2c'] arch/arm/boot/dts/bcm23550-sparrow.dtb i2c@1c000: compatible: ['brcm,kona-i2c'] is too short arch/arm/boot/dts/bcm23550-sparrow.dtb
