RE: [PATCH v13 11/22] PCI: dwc: Add dw_pcie_link_set_max_width()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Manivannan,

> From: Manivannan Sadhasivam, Sent: Saturday, April 22, 2023 8:51 PM
> 
> On Tue, Apr 18, 2023 at 09:23:52PM +0900, Yoshihiro Shimoda wrote:
> > To improve code readability, add dw_pcie_link_set_max_width().
> > The original code writes the PCIE_PORT_LINK_CONTROL register twice
> > if the pci->num_lanes is not zero. But, it should avoid to write
> > the register twice. So, refactor it.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/dwc/pcie-designware.c | 65 ++++++++++----------
> >  1 file changed, 34 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index 69358dc202f0..c76fa78c6468 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -737,6 +737,39 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
> >  	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, cap | link_speed);
> >  }
> >
> > +static void dw_pcie_link_set_max_width(struct dw_pcie *pci, u32 num_lanes)
> > +{
> > +	u32 val;
> > +
> > +	/* Set the number of lanes */
> > +	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
> > +	val &= ~PORT_LINK_FAST_LINK_MODE;
> > +	val |= PORT_LINK_DLL_LINK_EN;
> > +
> > +	/* Mask LINK_MODE if num_lanes is not zero */
> > +	if (num_lanes)
> > +		val &= ~PORT_LINK_MODE_MASK;
> > +
> > +	switch (num_lanes) {
> > +	case 1:
> > +		val |= PORT_LINK_MODE_1_LANES;
> > +		break;
> > +	case 2:
> > +		val |= PORT_LINK_MODE_2_LANES;
> > +		break;
> > +	case 4:
> > +		val |= PORT_LINK_MODE_4_LANES;
> > +		break;
> > +	case 8:
> > +		val |= PORT_LINK_MODE_8_LANES;
> > +		break;
> > +	default:
> > +		dev_dbg(pci->dev, "Using h/w default number of lanes\n");
> > +		return;
> 
> Here you are not updating the LINK_CONTROL register. You should break instead of
> returning.

Oops. I'll use "break;" here, not return; on v13.

> > +	}
> 
> Newline here.

I got it.

Best regards,
Yoshihiro Shimoda

> - Mani
> 
> > +	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > +}
> > +
> >  static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes)
> >  {
> >  	u32 val;
> > @@ -1040,36 +1073,6 @@ void dw_pcie_setup(struct dw_pcie *pci)
> >  		dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
> >  	}
> >
> > -	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
> > -	val &= ~PORT_LINK_FAST_LINK_MODE;
> > -	val |= PORT_LINK_DLL_LINK_EN;
> > -	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > -
> > -	if (!pci->num_lanes) {
> > -		dev_dbg(pci->dev, "Using h/w default number of lanes\n");
> > -		return;
> > -	}
> > -
> > -	/* Set the number of lanes */
> > -	val &= ~PORT_LINK_MODE_MASK;
> > -	switch (pci->num_lanes) {
> > -	case 1:
> > -		val |= PORT_LINK_MODE_1_LANES;
> > -		break;
> > -	case 2:
> > -		val |= PORT_LINK_MODE_2_LANES;
> > -		break;
> > -	case 4:
> > -		val |= PORT_LINK_MODE_4_LANES;
> > -		break;
> > -	case 8:
> > -		val |= PORT_LINK_MODE_8_LANES;
> > -		break;
> > -	default:
> > -		dev_err(pci->dev, "num-lanes %u: invalid value\n", pci->num_lanes);
> > -		return;
> > -	}
> > -	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > -
> > +	dw_pcie_link_set_max_width(pci, pci->num_lanes);
> >  	dw_pcie_link_set_max_link_width(pci, pci->num_lanes);
> >  }
> > --
> > 2.25.1
> >
> 
> --
> மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux