Re: [PATCH v5 11/14] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 13.04.2023 13:34, Bryan O'Donoghue wrote:
> Switch on usb-role-switching for usb_1 via TCPM. We need to declare
> usb-role-switch in &usb_1 and associate with the remote-endpoint in TCPM
> which provides the necessary signal.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
This belongs to the SoC DTSI as it describes the capabilities
of the USB controllers on the chip.

Also please add a newline before each subnode.

Konrad
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index 1e0b6fd59abc9..b5cc45358a474 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1273,7 +1273,13 @@ &usb_1 {
>  };
>  
>  &usb_1_dwc3 {
> -	dr_mode = "peripheral";
> +	dr_mode = "otg";
> +	usb-role-switch;
> +	port {
> +		dwc3_role_switch_in: endpoint {
> +			remote-endpoint = <&pm8150b_role_switch_out>;
> +		};
> +	};
>  };
>  
>  &usb_1_hsphy {
> @@ -1359,5 +1365,16 @@ connector {
>  					 PDO_FIXED_DUAL_ROLE |
>  					 PDO_FIXED_USB_COMM |
>  					 PDO_FIXED_DATA_SWAP)>;
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				pm8150b_role_switch_out: endpoint {
> +					remote-endpoint = <&dwc3_role_switch_in>;
> +				};
> +			};
> +		};
>  	};
>  };



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux