On 18.04.2023 20:10, Arnaud Vrac wrote:
> HDMI is not enabled yet on msm8998 so the pinctrl nodes are not
> used.
>
> Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
> ---
Are they supposed to be identical?
Konrad
> arch/arm64/boot/dts/qcom/msm8998.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index b150437a83558..fb4aa376ef117 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -1312,6 +1312,20 @@ blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
> drive-strength = <2>;
> bias-pull-up;
> };
> +
> + hdmi_cec_default: hdmi-cec-default-state {
> + pins = "gpio31";
> + function = "hdmi_cec";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hdmi_cec_sleep: hdmi-cec-sleep-state {
> + pins = "gpio31";
> + function = "hdmi_cec";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> };
>
> remoteproc_mss: remoteproc@4080000 {
>
