Re: [PATCH v3] dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 18, 2023 at 07:03:41PM +0200, Nikita Bondarenko wrote:
> Converted txt file to yaml. No additional changes.
> 
> Signed-off-by: Nikita Bondarenko <n2h9z4@xxxxxxxxx>
> ---
> 
> Changes in v3:
> - updated commit message
> - updated the compatible definition to probably fix "compatible is too long" warning
> - updated example to how it was in the txt file
> 
> 
> I do not have this warning when I am running  
> make  DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml ARCH=arm dt_binding_check
> maybe I run it without some additional variable?
> 
> But I checked arch/arm/boot/dts/bcm28155-ap.dts, it includes bcm11351.dtsiv which contains 
> compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
> which probably causes a warning
> This is exact how it was in txt file example.
> 
> If I put it in an example in a yaml file, dt_binding_check does not pass.
> Looks like the issue is in the enum type of compatible. It does not allow multiple strings.  
> Updated to not to use enum. The example with two strings in compatible passes the checks.
> 
> make  DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml ARCH=arm dt_binding_check
>   LINT    Documentation/devicetree/bindings
>   CHKDT   Documentation/devicetree/bindings/processed-schema.json
>   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
>   DTEX    Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.example.dts
>   DTC_CHK Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.example.dtb
> 
> make  DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml ARCH=arm dtbs_check
>   LINT    Documentation/devicetree/bindings
>   CHKDT   Documentation/devicetree/bindings/processed-schema.json
>   SCHEMA  Documentation/devicetree/bindings/processed-schema.json

And that's it? You need to remove all the .dtb files if you don't see 
any DTB lines. But this runs it for you:

https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230418170341.28805-1-n2h9z4@xxxxxxxxx/

It all looks fine, so not sure what your question/issue is?

> 
> 
> v2 patch is here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230402135555.62507-1-n2h9z4@xxxxxxxxx/
> 
>  .../bindings/watchdog/brcm,kona-wdt.txt       | 15 -------
>  .../bindings/watchdog/brcm,kona-wdt.yaml      | 41 +++++++++++++++++++
>  2 files changed, 41 insertions(+), 15 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
>  create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
> deleted file mode 100644
> index 2b86a00e351d..000000000000
> --- a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -Broadcom Kona Family Watchdog Timer
> ------------------------------------
> -
> -This watchdog timer is used in the following Broadcom SoCs:
> -  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
> -
> -Required properties:
> -  - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
> -  - reg: memory address & range
> -
> -Example:
> -	watchdog@35002f40 {
> -		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
> -		reg = <0x35002f40 0x6c>;
> -	};
> diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
> new file mode 100644
> index 000000000000..3d4403b41cbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/brcm,kona-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Kona Family Watchdog Timer
> +
> +description: |
> +  This watchdog timer is used in the following Broadcom SoCs:
> +  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
> +
> +maintainers:
> +  - Florian Fainelli <f.fainelli@xxxxxxxxx>
> +  - Ray Jui <rjui@xxxxxxxxxxxx>
> +  - Scott Branden <sbranden@xxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: watchdog.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: brcm,bcm11351-wdt
> +      - const: brcm,kona-wdt
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    watchdog@35002f40 {
> +        compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
> +        reg = <0x35002f40 0x6c>;
> +    };
> -- 
> 2.34.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux