[PATCH RFC 3/4] arm64: dts: qcom: sm6350: add uart1 node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the node describing uart1 incl. opp table and pinctrl.

Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 63 ++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 18c4616848ce..16c5e9a6c98a 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -378,6 +378,25 @@ opp-2073600000 {
 		};
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
@@ -741,6 +760,22 @@ i2c0: i2c@880000 {
 				status = "disabled";
 			};
 
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM6350_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c2: i2c@888000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00888000 0 0x4000>;
@@ -1726,6 +1761,34 @@ qup_i2c10_default: qup-i2c10-default-state {
 				drive-strength = <2>;
 				bias-pull-up;
 			};
+
+			qup_uart1_cts: qup-uart1-cts-default-state {
+				pins = "gpio61";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart1_rts: qup-uart1-rts-default-state {
+				pins = "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart1_tx: qup-uart1-tx-default-state {
+				pins = "gpio63";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart1_rx: qup-uart1-rx-default-state {
+				pins = "gpio64";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
 		};
 
 		apps_smmu: iommu@15000000 {

-- 
2.40.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux