Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX75 pinctrl devicetree compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/21/2023 6:26 PM, Rob Herring wrote:
On Fri, 21 Apr 2023 15:13:15 +0530, Rohit Agarwal wrote:
Add device tree binding Documentation details for Qualcomm SDX75
pinctrl driver.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
  .../bindings/pinctrl/qcom,sdx75-tlmm.yaml          | 177 +++++++++++++++++++++
  1 file changed, 177 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml:76:52: [warning] too few spaces after comma (commas)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.example.dtb: pinctrl@f100000: uart-w-state: 'oneOf' conditional failed, one must be fixed:
	'function' is a required property
	'pins' is a required property
	'rx-pins', 'tx-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
	'qup_se1_l2_mira' is not one of ['gpio', 'eth0_mdc', 'eth0_mdio', 'eth1_mdc', 'eth1_mdio', 'qlink0_wmss_reset', 'qlink1_wmss_reset', 'rgmii_rxc', 'rgmii_rxd0', 'rgmii_rxd1', 'rgmii_rxd2', 'rgmii_rxd3', 'rgmii_rx_ctl', 'rgmii_txc', 'rgmii_txd0', 'rgmii_txd1', 'rgmii_txd2', 'rgmii_txd3', 'rgmii_tx_ctl', 'adsp_ext_vfr', 'atest_char_start', 'atest_char_status0', 'atest_char_status1', 'atest_char_status2', 'atest_char_status3', 'audio_ref_clk', 'bimc_dte_test0', 'bimc_dte_test1', 'char_exec_pending', 'char_exec_release', 'coex_uart2_rx', 'coex_uart2_tx', 'coex_uart_rx', 'coex_uart_tx', 'cri_trng_rosc', 'cri_trng_rosc0', 'cri_trng_rosc1', 'dbg_out_clk', 'ddr_bist_complete', 'ddr_bist_fail', 'ddr_bist_start', 'ddr_bist_stop', 'ddr_pxi0_test', 'ebi0_wrcdc_dq2', 'ebi0_wrcdc_dq3', 'ebi2_a_d', 'ebi2_lcd_cs', 'ebi2_lcd_reset', 'ebi2_lcd_te', 'emac0_mcg_pst0', 'emac0_mcg_pst1', 'emac0_mcg_pst2', 'emac0_mcg_pst3', 'emac0_ptp_aux', 'emac0_ptp_pps', 'emac1_mcg_pst0', 'emac1_mcg_pst1', 'emac1_mcg_pst2', 'emac1_mcg_pst3', 'emac1_ptp_aux0', 'emac1_ptp_aux1', 'emac1_ptp_aux2', 'emac1_ptp_aux3', 'emac1_ptp_pps0', 'emac1_ptp_pps1', 'emac1_ptp_pps2', 'emac1_ptp_pps3', 'emac_cdc_dtest0', 'emac_cdc_dtest1', 'emac_pps_in', 'ext_dbg_uart', 'gcc_125_clk', 'gcc_gp1_clk', 'gcc_gp2_clk', 'gcc_gp3_clk', 'gcc_plltest_bypassnl', 'gcc_plltest_resetn', 'i2s_mclk', 'jitter_bist_ref', 'ldo_en', 'ldo_update', 'm_voc_ext', 'mgpi_clk_req', 'native0', 'native1', 'native2', 'native3', 'native_char_start', 'native_tsens_osc', 'native_tsense_pwm1', 'nav_dr_sync', 'nav_gpio_0', 'nav_gpio_1', 'nav_gpio_2', 'nav_gpio_3', 'pa_indicator_1', 'pci_e_rst', 'pcie0_clkreq_n', 'pcie1_clkreq_n', 'pcie2_clkreq_n', 'pll_bist_sync', 'pll_clk_aux', 'pll_ref_clk', 'pri_mi2s_data0', 'pri_mi2s_data1', 'pri_mi2s_sck', 'pri_mi2s_ws', 'prng_rosc_test0', 'prng_rosc_test1', 'prng_rosc_test2', 'prng_rosc_test3', 'qdss_cti_trig0', 'qdss_cti_trig1', 'qdss_gpio_traceclk', 'qdss_gpio_tracectl', 'qdss_gpio_tracedata0', 'qdss_gpio_tracedata1', 'qdss_gpio_tracedata10', 'qdss_gpio_trace
data11', 'qdss_gpio_tracedata12', 'qdss_gpio_tracedata13', 'qdss_gpio_tracedata14', 'qdss_gpio_tracedata15', 'qdss_gpio_tracedata2', 'qdss_gpio_tracedata3', 'qdss_gpio_tracedata4', 'qdss_gpio_tracedata5', 'qdss_gpio_tracedata6', 'qdss_gpio_tracedata7', 'qdss_gpio_tracedata8', 'qdss_gpio_tracedata9', 'qlink0_b_en', 'qlink0_b_req', 'qlink0_l_en', 'qlink0_l_req', 'qlink1_l_en', 'qlink1_l_req', 'qup_se0_l0', 'qup_se0_l1', 'qup_se0_l2', 'qup_se0_l3', 'qup_se1_l2', 'qup_se1_l3', 'qup_se2_l0', 'qup_se2_l1', 'qup_se2_l2', 'qup_se2_l3', 'qup_se3_l0', 'qup_se3_l1', 'qup_se3_l2', 'qup_se3_l3', 'qup_se4_l2', 'qup_se4_l3', 'qup_se5_l0', 'qup_se5_l1', 'qup_se6_l0', 'qup_se6_l1', 'qup_se6_l2', 'qup_se6_l3', 'qup_se7_l0', 'qup_se7_l1', 'qup_se7_l2', 'qup_se7_l3', 'qup_se8_l2', 'qup_se8_l3', 'sdc1_tb_trig', 'sdc2_tb_trig', 'sec_mi2s_data0', 'sec_mi2s_data1', 'sec_mi2s_sck', 'sec_mi2s_ws', 'sgmii_phy_intr0', 'sgmii_phy_intr1', 'spmi_coex_clk', 'spmi_coex_data', 'spmi_vgi_hwevent', 'tgu_ch0_trigout', 'tri_mi2s_data0', 'tri_mi2s_data1', 'tri_mi2s_sck', 'tri_mi2s_ws', 'uim1_clk', 'uim1_data', 'uim1_present', 'uim1_reset', 'uim2_clk', 'uim2_data', 'uim2_present', 'uim2_reset', 'usb2phy_ac_en', 'vsense_trigger_mirnat']
	'qup_se1_l3_mira' is not one of ['gpio', 'eth0_mdc', 'eth0_mdio', 'eth1_mdc', 'eth1_mdio', 'qlink0_wmss_reset', 'qlink1_wmss_reset', 'rgmii_rxc', 'rgmii_rxd0', 'rgmii_rxd1', 'rgmii_rxd2', 'rgmii_rxd3', 'rgmii_rx_ctl', 'rgmii_txc', 'rgmii_txd0', 'rgmii_txd1', 'rgmii_txd2', 'rgmii_txd3', 'rgmii_tx_ctl', 'adsp_ext_vfr', 'atest_char_start', 'atest_char_status0', 'atest_char_status1', 'atest_char_status2', 'atest_char_status3', 'audio_ref_clk', 'bimc_dte_test0', 'bimc_dte_test1', 'char_exec_pending', 'char_exec_release', 'coex_uart2_rx', 'coex_uart2_tx', 'coex_uart_rx', 'coex_uart_tx', 'cri_trng_rosc', 'cri_trng_rosc0', 'cri_trng_rosc1', 'dbg_out_clk', 'ddr_bist_complete', 'ddr_bist_fail', 'ddr_bist_start', 'ddr_bist_stop', 'ddr_pxi0_test', 'ebi0_wrcdc_dq2', 'ebi0_wrcdc_dq3', 'ebi2_a_d', 'ebi2_lcd_cs', 'ebi2_lcd_reset', 'ebi2_lcd_te', 'emac0_mcg_pst0', 'emac0_mcg_pst1', 'emac0_mcg_pst2', 'emac0_mcg_pst3', 'emac0_ptp_aux', 'emac0_ptp_pps', 'emac1_mcg_pst0', 'emac1_mcg_pst1', 'emac1_mcg_pst2', 'emac1_mcg_pst3', 'emac1_ptp_aux0', 'emac1_ptp_aux1', 'emac1_ptp_aux2', 'emac1_ptp_aux3', 'emac1_ptp_pps0', 'emac1_ptp_pps1', 'emac1_ptp_pps2', 'emac1_ptp_pps3', 'emac_cdc_dtest0', 'emac_cdc_dtest1', 'emac_pps_in', 'ext_dbg_uart', 'gcc_125_clk', 'gcc_gp1_clk', 'gcc_gp2_clk', 'gcc_gp3_clk', 'gcc_plltest_bypassnl', 'gcc_plltest_resetn', 'i2s_mclk', 'jitter_bist_ref', 'ldo_en', 'ldo_update', 'm_voc_ext', 'mgpi_clk_req', 'native0', 'native1', 'native2', 'native3', 'native_char_start', 'native_tsens_osc', 'native_tsense_pwm1', 'nav_dr_sync', 'nav_gpio_0', 'nav_gpio_1', 'nav_gpio_2', 'nav_gpio_3', 'pa_indicator_1', 'pci_e_rst', 'pcie0_clkreq_n', 'pcie1_clkreq_n', 'pcie2_clkreq_n', 'pll_bist_sync', 'pll_clk_aux', 'pll_ref_clk', 'pri_mi2s_data0', 'pri_mi2s_data1', 'pri_mi2s_sck', 'pri_mi2s_ws', 'prng_rosc_test0', 'prng_rosc_test1', 'prng_rosc_test2', 'prng_rosc_test3', 'qdss_cti_trig0', 'qdss_cti_trig1', 'qdss_gpio_traceclk', 'qdss_gpio_tracectl', 'qdss_gpio_tracedata0', 'qdss_gpio_tracedata1', 'qdss_gpio_tracedata10', 'qdss_gpio_trace
data11', 'qdss_gpio_tracedata12', 'qdss_gpio_tracedata13', 'qdss_gpio_tracedata14', 'qdss_gpio_tracedata15', 'qdss_gpio_tracedata2', 'qdss_gpio_tracedata3', 'qdss_gpio_tracedata4', 'qdss_gpio_tracedata5', 'qdss_gpio_tracedata6', 'qdss_gpio_tracedata7', 'qdss_gpio_tracedata8', 'qdss_gpio_tracedata9', 'qlink0_b_en', 'qlink0_b_req', 'qlink0_l_en', 'qlink0_l_req', 'qlink1_l_en', 'qlink1_l_req', 'qup_se0_l0', 'qup_se0_l1', 'qup_se0_l2', 'qup_se0_l3', 'qup_se1_l2', 'qup_se1_l3', 'qup_se2_l0', 'qup_se2_l1', 'qup_se2_l2', 'qup_se2_l3', 'qup_se3_l0', 'qup_se3_l1', 'qup_se3_l2', 'qup_se3_l3', 'qup_se4_l2', 'qup_se4_l3', 'qup_se5_l0', 'qup_se5_l1', 'qup_se6_l0', 'qup_se6_l1', 'qup_se6_l2', 'qup_se6_l3', 'qup_se7_l0', 'qup_se7_l1', 'qup_se7_l2', 'qup_se7_l3', 'qup_se8_l2', 'qup_se8_l3', 'sdc1_tb_trig', 'sdc2_tb_trig', 'sec_mi2s_data0', 'sec_mi2s_data1', 'sec_mi2s_sck', 'sec_mi2s_ws', 'sgmii_phy_intr0', 'sgmii_phy_intr1', 'spmi_coex_clk', 'spmi_coex_data', 'spmi_vgi_hwevent', 'tgu_ch0_trigout', 'tri_mi2s_data0', 'tri_mi2s_data1', 'tri_mi2s_sck', 'tri_mi2s_ws', 'uim1_clk', 'uim1_data', 'uim1_present', 'uim1_reset', 'uim2_clk', 'uim2_data', 'uim2_present', 'uim2_reset', 'usb2phy_ac_en', 'vsense_trigger_mirnat']
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1682070196-980-2-git-send-email-quic_rohiagar@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Make dt_binding_check not throwing this error even after updating the dtschema and yamllint is installed. Will update this in patchset 4. Will wait for comments on driver change, If there are any will push the patchset 4
addressing those comments at once.

Thanks
Rohit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux