Re: [PATCH V5 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/21/2023 3:32 PM, Bryan O'Donoghue wrote:
On 18/04/2023 07:46, Souradeep Chowdhury wrote:
All of Qualcomm's proprietary Android boot-loaders capture boot time
stats, like the time when the bootloader started execution and at what
point the bootloader handed over control to the kernel etc. in the IMEM
region. This information is captured in a specific format by this driver
by mapping a structure to the IMEM memory region and then accessing the
members of the structure to show the information within debugfs file.
This information is useful in verifying if the existing boot KPIs have
regressed or not. The information is shown in milliseconds, a sample
log from sm8450(waipio) device is as follows:-

/sys/kernel/debug/146aa6b0.boot_stats # cat abl_time
17898 ms
/sys/kernel/debug/146aa6b0.boot_stats # cat pre_abl_time
2879 ms

The Module Power Manager(MPM) sleep counter starts ticking at the PBL
stage and the timestamp generated by the sleep counter is logged by
the Qualcomm proprietary bootloader(ABL) at two points-> First when it
starts execution which is logged here as "pre_abl_time" and the second
when it is about to load the kernel logged as "abl_time". Documentation
details are also added in Documentation/ABI/testing/debugfs-driver-bootstat

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
---
  Documentation/ABI/testing/debugfs-driver-bootstat |  17 ++++
  drivers/soc/qcom/Kconfig                          |   9 ++
  drivers/soc/qcom/Makefile                         |   1 +
  drivers/soc/qcom/boot_stats.c                     | 101 ++++++++++++++++++++++
  4 files changed, 128 insertions(+)
  create mode 100644 Documentation/ABI/testing/debugfs-driver-bootstat
  create mode 100644 drivers/soc/qcom/boot_stats.c

diff --git a/Documentation/ABI/testing/debugfs-driver-bootstat b/Documentation/ABI/testing/debugfs-driver-bootstat
new file mode 100644
index 0000000..2543029
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-bootstat
@@ -0,0 +1,17 @@
+What:        /sys/kernel/debug/...stats/pre_abl_time
+Date:           April 2023
+Contact:        Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
+Description:
+        This file is used to read the KPI value pre abl time.
+        It shows the time in milliseconds from the starting
+        point of PBL to the point when the control shifted
+        to ABL(Qualcomm proprietary bootloader).
+
+What:           /sys/kernel/debug/...stats/abl_time
+Date:           April 2023
+Contact:        Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
+Description:
+        This file is used to read the KPI value abl time.
+        It show the duration in milliseconds from the
+        time control switched to ABL to the point when
+        the linux kernel started getting loaded.
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index a8f2830..0d2cbd3 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -16,6 +16,15 @@ config QCOM_AOSS_QMP
        subsystems as well as controlling the debug clocks exposed by the Always On
        Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
+config QCOM_BOOTSTAT
+    tristate "Qualcomm Technologies, Boot Stat driver"
+    depends on ARCH_QCOM || COMPILE_TEST
+    help
+      This option enables driver support for boot stats. Boot stat driver logs +      the kernel bootloader information by accessing the imem region. These +      information are exposed in the form of debugfs files. This is used to
+      determine if there is any regression in boot timings.
+
  config QCOM_COMMAND_DB
      tristate "Qualcomm Command DB"
      depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 6e88da8..bdaa41a 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,6 +1,7 @@
  # SPDX-License-Identifier: GPL-2.0
  CFLAGS_rpmh-rsc.o := -I$(src)
  obj-$(CONFIG_QCOM_AOSS_QMP) +=    qcom_aoss.o
+obj-$(CONFIG_QCOM_BOOTSTAT) += boot_stats.o
  obj-$(CONFIG_QCOM_GENI_SE) +=    qcom-geni-se.o
  obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
  obj-$(CONFIG_QCOM_CPR)        += cpr.o
diff --git a/drivers/soc/qcom/boot_stats.c b/drivers/soc/qcom/boot_stats.c
new file mode 100644
index 0000000..7ae002b
--- /dev/null
+++ b/drivers/soc/qcom/boot_stats.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2019, 2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#define TO_MS(timestamp) ((timestamp * 1000) / 32768)

Is this related to the sleep_clk, if not, what is the refrence clock ?

Is this value constant across different SoCs i.e. will this run and produce meaningful results on an msm8916 ?

This is the sleep counter of MPM(Module Power Manager), yes, it will produce meaningful results on almost all QCOM SoCs including msm8916.


---
bod



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux