Re: [RFC PATCH] drm/exynos: Add DECON driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Inki,

On Tue, Nov 25, 2014 at 6:30 PM, Inki Dae <inki.dae@xxxxxxxxxxx> wrote:
> On 2014년 11월 25일 21:17, Ajay kumar wrote:
>> ping.
>>
>
> You'd need to clean up clocks and fix up binding file. And then let's
> have review in more details. I wish that other people also give you
> their reviews.
Nice to hear. Earlier, you mentioned that its good if FIMD driver itself
is modified to support Exynos7 DECON. So, what is your take now?
1) Should I add it in FIMD driver itself?
    We may need to add lot of driver_data
    for that, since offsets are much different.
2) Or, create two seperate register level files for Exynos5 and Exynos7?
3) Or the current way - Entirely different driver

> Anyway, below is my answer.
>
> Thanks,
> Inki Dae
>
>
>> On Tue, Nov 11, 2014 at 10:08 PM, Ajay kumar <ajaynumb@xxxxxxxxx> wrote:
>>> Hi Inki,
>>>
>>> On Mon, Nov 3, 2014 at 3:31 PM, Inki Dae <inki.dae@xxxxxxxxxxx> wrote:
>>>>
>>>> Hi,
>>>>
>>>> Fortunately, I could get the user manual for Exynos7420. Below are my
>>>> comments.
>>>>
>>>> Thanks,
>>>> Inki Dae
>>>>
>>>> On 2014년 10월 23일 01:34, Ajay kumar wrote:
>>>>> On Wed, Oct 22, 2014 at 8:26 PM, Inki Dae <inki.dae@xxxxxxxxxxx> wrote:
>>>>>>
>>>>>> Thanks for contribution.
>>>>>>
>>>>>> It seems reasonable that you separate device drivers into FIMD and DECON
>>>>>> because many registers of them have many different offsets and fields.
>>>>>> However, there may be a good solution that we can combine common sets of
>>>>>> these drivers later.
>>>>> Yes, this is the main reason behind sending this as RFC patch.
>>>>> I want to know what's the best way to do this.
>>>>> FIMD, 5433 DECON and Exynos7 DECON - all are different.
>>>>> Also, in Exynos7 DECON-INT is same as DECON-EXT(Mixer).
>>>>> So, even I am not sure how the driver layouts should be!
>>>>
>>>> Please, make sure Exynos SoC name, Exynos7410 or Exynos7420. In my
>>>> understanding, Exynos7 doesn't mean one real SoC.
>>> We shall use Exynos7 as per the discussion.
>
> Just for the time being.
Ok.

>>>
>>>>>
>>>>>> Below are my comments.
>>>>>>
>>>>>> Thanks,
>>>>>> Inki Dae
>>>>>>
>>>>>> On 2014년 10월 10일 21:48, Ajay Kumar wrote:
>>>>>>> This series is based on exynos-drm-next branch of Inki Dae's tree at:
>>>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
>>>>>>>
>>>>>>> DECON(Display and Enhancement Controller) is the new IP
>>>>>>> in exynos7 SOC for generating video signals using pixel data.
>>>>>>
>>>>>> DECON was used since Exynos5430. And is Exynos5433 different from
>>>>>> Exynos7? If so, could I get the Exynos7 user manual (TRM) for review?
>>>>> Yes, Exynos5433 DECON is very much different than Exynos7 DECON.
>>>>
>>>> Do not use Exynos7 word and use Exynos7410 or Exynos7420 instead.
>>> Again, we shall use Exynos7.
>>>
>>>>> I will see how manual can be arranged.
>>>>>
>>>>>>>
>>>>>>> DECON driver can be used to drive 2 different interfaces on Exynos7:
>>>>>>> DECON-INT(video controller) and DECON-EXT(Mixer for HDMI)
>>>>>>>
>>>>>>> The existing FIMD driver code was used as a template to create
>>>>>>> DECON driver. Only DECON-INT is supported as of now, and
>>>>>>> DECON-EXT support will be added later.
>>>>>>>
>>>>>>> Signed-off-by: Akshu Agrawal <akshu.a@xxxxxxxxxxx>
>>>>>>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>>>>>>> ---
>>>>>>>  .../devicetree/bindings/video/exynos-decon.txt     |   68 ++
>>>>>>>  drivers/gpu/drm/exynos/Kconfig                     |   11 +-
>>>>>>>  drivers/gpu/drm/exynos/Makefile                    |    1 +
>>>>>>>  drivers/gpu/drm/exynos/exynos_drm_decon.c          | 1086
>>>>>> ++++++++++++++++++++
>>>>>>>  drivers/gpu/drm/exynos/exynos_drm_drv.c            |   17 +-
>>>>>>>  drivers/gpu/drm/exynos/exynos_drm_drv.h            |   11 +
>>>>>>>  include/video/samsung_decon.h                      |  346 +++++++
>>>>>>>  7 files changed, 1537 insertions(+), 3 deletions(-)
>>>>>>>  create mode 100644
>>>>>> Documentation/devicetree/bindings/video/exynos-decon.txt
>>>>>>>  create mode 100644 drivers/gpu/drm/exynos/exynos_drm_decon.c
>>>>>>>  create mode 100644 include/video/samsung_decon.h
>>>>>>>
>>>>>>> diff --git a/Documentation/devicetree/bindings/video/exynos-decon.txt
>>>>>> b/Documentation/devicetree/bindings/video/exynos-decon.txt
>>>>>>> new file mode 100644
>>>>>>> index 0000000..e865650
>>>>>>> --- /dev/null
>>>>>>> +++ b/Documentation/devicetree/bindings/video/exynos-decon.txt
>>>>>>> @@ -0,0 +1,68 @@
>>>>>>> +Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
>>>>>>> +
>>>>>>> +DECON (Display and Enhancement Controller) is the Display Controller
>>>>>> for the
>>>>>>> +Exynos7 series of SoCs which transfers the image data from a video memory
>>>>>>> +buffer to an external LCD interface.
>>>>>>> +
>>>>>>> +Required properties:
>>>>>>> +- compatible: value should be "samsung,exynos7-decon";
>>>>>>
>>>>>> If exynos5433 was just renamed to exynos7 then, it should be one of the
>>>>>> following:
>>>>>>         (a) "samsung,exynos5430-decon" for Display and enhancement controller
>>>>>> IP for Exynos5430
>>>>>>         (b) "samsung,exynos7" for Display and enhancement controller IP for Exynos7
>>>>>>
>>>>>> Or,
>>>>>>         (a) "samsung,exynos5430-decon" for Display and enhancement controller
>>>>>> IP for Exynos5430
>>>>>>
>>>>>>         (b) "samsung,exynos5433-decon" for Display and enhancement controller
>>>>>> IP for Exynos5433
>>>>>>         (c) "samsung,exynos7" for Display and enhancement controller IP for Exynos7
>>>>> Eventually, we will end up here.
>>>>>
>>>>>>
>>>>>>> +
>>>>>>> +- reg: physical base address and length of the DECON registers set.
>>>>>>> +
>>>>>>> +- interrupt-parent: should be the phandle of the decon controller's
>>>>>>> +             parent interrupt controller.
>>>>>>> +
>>>>>>> +- interrupts: should contain a list of all DECON IP block interrupts
>>>>>> in the
>>>>>>> +              order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
>>>>>>> +              format depends on the interrupt controller used.
>>>>>>> +
>>>>>>> +- interrupt-names: should contain the interrupt names: "fifo", "vsync",
>>>>>>> +     "lcd_sys", in the same order as they were listed in the interrupts
>>>>>>> +        property.
>>>>>>> +
>>>>>>> +- pinctrl-0: pin control group to be used for this controller.
>>>>>>> +
>>>>>>> +- pinctrl-names: must contain a "default" entry.
>>>>>>> +
>>>>>>> +- clocks: must include clock specifiers corresponding to entries in the
>>>>>>> +         clock-names property.
>>>>>>> +
>>>>>>> +- clock-names: list of clock names sorted in the same order as the clocks
>>>>>>> +               property. Must contain "pclk_decon0", "aclk_decon0",
>>>>>>> +            "decon0_eclk", "decon0_vclk", "sclk_dsd", aclk_lh_disp0",
>>>>>>> +            "aclk_disp", "aclk_lh_disp1".
>>>>>>
>>>>>> Should DECON driver really control above all clocks? I think it's enough
>>>>>> that DECON driver controls only lcd and bus clocks, and others could be
>>>>>> configured by boot-loader or by calling clk_set_rate.
>>>>> Yes, even I am not sure of the clocks. I have copied these clocks from intrnal
>>>>> android code.
>>>>>>> +
>>>>>>> +Optional Properties:
>>>>>>> +- samsung,power-domain: a phandle to DECON power domain node.
>>>>>>
>>>>>> You are missing many properties,
>>>>>>         samsung,invert-vden
>>>>>>         samsung,invert-vclk
>>>>> These are not present in Exynos7 DECON!
>>>>
>>>> What does the CRCCTRL register mean? That definitely indicates above
>>>> properties.
>>> Hmm, even I am not sure about CRCCTRL register.
>>> Currently, we don't actually set CRC on, and still I can see the display
>>> on a MIPI DSI panel.
>
> It would be nice that you can check this register about what is the purpose.
Ok. I will check them.

>>> May be, I will know better once I bring up DP interface on Exynos7.
>>>
>>>>>
>>>>>>         display-timings
>>>>>>         ...
>>>>>> refer to below document,
>>>>>> Documentation/devicetree/bindings/video/samsung-fimd.txt
>>>>>>
>>>>>>> +
>>>>>>> +Example:
>>>>>>> +
>>>>>>> +SoC specific DT entry:
>>>>>>> +
>>>>>>> +     decon@13930000 {
>>>>
>>>> In case of Exynos7420, the base address of the DECON controller is
>>>> 0x13950000. Does 0x1393000 mean the one for Exynos7410
>>> There is DECON-INT(0x13930000) and DECON-EXT(0x13950000)
>>> DECON-INT is the display controller, but DECON-EXT replaces mixer in Exynos7.
>>>
>>>>>>> +             compatible = "samsung,exynos7-decon";
>>>>
>>>> Therefore, it should be "samsung,exynos7410-decon" or
>>>> "samsung,exynos7420-decon"
>>> "samsung,exynos7-decon"
>>>
>>>>>>> +             interrupt-parent = <&combiner>;
>>>>>>> +             reg = <0x13930000 0x1000>;
>>>>>>> +             interrupt-names = "lcd_sys", "vsync", "fifo";
>>>>>>> +             interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
>>>>>>> +             clocks = <&clock_disp PCLK_DECON_INT>,
>>>>>>> +                      <&clock_disp ACLK_DECON_INT>,
>>>>>>> +                      <&clock_disp SCLK_DECON_INT_ECLK>,
>>>>>>> +                      <&clock_disp SCLK_DECON_INT_EXTCLKPLL>,
>>>>>>> +                      <&clock_disp SCLK_DSD>,
>>>>>>> +                      <&clock_bus0 ACLK_LH_DISP0>,
>>>>>>> +                      <&clock_disp ACLK_CP_DISP>,
>>>>>>> +                      <&clock_bus0 ACLK_LH_DISP1>;
>>>>>>> +             clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
>>>>>>> +                             "decon0_vclk", "sclk_dsd", "aclk_lh_disp0",
>>>>>>> +                             "aclk_disp", "aclk_lh_disp1";
>>>>>>> +             status = "disabled";
>>>>>>> +     };
>>>>>>> +
>>>>>>> +Board specific DT entry:
>>>>>>> +
>>>>>>> +     decon@13930000 {
>>>>>>> +             pinctrl-0 = <&lcd_clk &pwm1_out>;
>>>>>>> +             pinctrl-names = "default";
>>>>>>> +             status = "okay";
>>>>>>> +     };
>>>>>>> diff --git a/drivers/gpu/drm/exynos/Kconfig
>>>>>> b/drivers/gpu/drm/exynos/Kconfig
>>>>>>> index fd1c070..89275ea 100644
>>>>>>> --- a/drivers/gpu/drm/exynos/Kconfig
>>>>>>> +++ b/drivers/gpu/drm/exynos/Kconfig
>>>>>>> @@ -31,6 +31,13 @@ config DRM_EXYNOS_FIMD
>>>>>>>       help
>>>>>>>         Choose this option if you want to use Exynos FIMD for DRM.
>>>>>>>
>>>>>>> +config DRM_EXYNOS_DECON
>>>>>>> +     bool "Exynos DRM DECON"
>>>>>>> +     depends on DRM_EXYNOS
>>>>>>> +     select FB_MODE_HELPERS
>>>>>>> +     help
>>>>>>> +       Choose this option if you want to use Exynos DECON for DRM.
>>>>>>> +
>>>>>>>  config DRM_EXYNOS_DPI
>>>>>>>       bool "EXYNOS DRM parallel output support"
>>>>>>>       depends on DRM_EXYNOS_FIMD
>>>>>>> @@ -41,7 +48,7 @@ config DRM_EXYNOS_DPI
>>>>>>>
>>>>>>>  config DRM_EXYNOS_DSI
>>>>>>>       bool "EXYNOS DRM MIPI-DSI driver support"
>>>>>>> -     depends on DRM_EXYNOS_FIMD
>>>>>>> +     depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON)
>>>>>>>       select DRM_MIPI_DSI
>>>>>>>       select DRM_PANEL
>>>>>>>       default n
>>>>>>> @@ -50,7 +57,7 @@ config DRM_EXYNOS_DSI
>>>>>>>
>>>>>>>  config DRM_EXYNOS_DP
>>>>>>>       bool "EXYNOS DRM DP driver support"
>>>>>>> -     depends on DRM_EXYNOS_FIMD && ARCH_EXYNOS && (DRM_PTN3460=n ||
>>>>>> DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
>>>>>>> +     depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON) && ARCH_EXYNOS &&
>>>>>> (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
>>>>>>>       default DRM_EXYNOS
>>>>>>>       select DRM_PANEL
>>>>>>>       help
>>>>>>> diff --git a/drivers/gpu/drm/exynos/Makefile
>>>>>> b/drivers/gpu/drm/exynos/Makefile
>>>>>>> index 33ae365..c3282ac 100644
>>>>>>> --- a/drivers/gpu/drm/exynos/Makefile
>>>>>>> +++ b/drivers/gpu/drm/exynos/Makefile
>>>>>>> @@ -11,6 +11,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
>>>>>>>  exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
>>>>>>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DMABUF) += exynos_drm_dmabuf.o
>>>>>>>  exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)  += exynos_drm_fimd.o
>>>>>>> +exynosdrm-$(CONFIG_DRM_EXYNOS_DECON) += exynos_drm_decon.o
>>>>>>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DPI)   += exynos_drm_dpi.o
>>>>>>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DSI)   += exynos_drm_dsi.o
>>>>>>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DP)    += exynos_dp_core.o exynos_dp_reg.o
>>>>>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_decon.c
>>>>>> b/drivers/gpu/drm/exynos/exynos_drm_decon.c
>>>>>>> new file mode 100644
>>>>>>> index 0000000..5ac4557
>>>>>>> --- /dev/null
>>>>>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_decon.c
>>>>>>> @@ -0,0 +1,1086 @@
>>>>>>> +/* exynos_drm_decon.c
>>>>>>> + *
>>>>>>> + * Copyright (C) 2014 Samsung Electronics Co.Ltd
>>>>>>> + * Authors:
>>>>>>> + *   Akshu Agarwal <akshu.a@xxxxxxxxxxx>
>>>>>>> + *   Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>>>>>>> + *
>>>>>>> + * This program is free software; you can redistribute  it and/or
>>>>>> modify it
>>>>>>> + * under  the terms of  the GNU General  Public License as published
>>>>>> by the
>>>>>>> + * Free Software Foundation;  either version 2 of the  License, or
>>>>>> (at your
>>>>>>> + * option) any later version.
>>>>>>> + *
>>>>>>> + */
>>>>>>> +#include <drm/drmP.h>
>>>>>>> +#include <drm/exynos_drm.h>
>>>>>>> +
>>>>>>> +#include <linux/clk.h>
>>>>>>> +#include <linux/component.h>
>>>>>>> +#include <linux/kernel.h>
>>>>>>> +#include <linux/of.h>
>>>>>>> +#include <linux/of_device.h>
>>>>>>> +#include <linux/platform_device.h>
>>>>>>> +#include <linux/pm_runtime.h>
>>>>>>> +
>>>>>>> +#include <video/of_display_timing.h>
>>>>>>> +#include <video/of_videomode.h>
>>>>>>> +#include <video/samsung_decon.h>
>>>>>>> +
>>>>>>> +#include "exynos_drm_crtc.h"
>>>>>>> +#include "exynos_drm_drv.h"
>>>>>>> +#include "exynos_drm_fbdev.h"
>>>>>>> +#include "exynos_drm_iommu.h"
>>>>>>> +
>>>>>>> +/*
>>>>>>> + * DECON stands for Display and Enhancement controller, and
>>>>>>> + * as a display controller, it transfers contents drawn on memory
>>>>>>> + * to a LCD Panel through Display Interfaces such as RGB or
>>>>>>> + * CPU Interface.
>>>>>>> + */
>>>>>>> +
>>>>>>> +#define DECON_DEFAULT_FRAMERATE 60
>>>>>>> +#define RESET_TIMEOUT 200
>>>>>>> +#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
>>>>>>> +
>>>>>>> +#define WINDOWS_NR   2
>>>>>>
>>>>>> I know that DECON supports five overlays.
>>>>> Exynos7 supports 7 overlays: 3 DMA channels and 4 local path.
>>>>> Out of 3, one is secured DMA. so, we can in general use only 2 DMA layers.
>>>>
>>>> In case of Exynos7420, the DECON controller supports 1 dma channel and
>>>> four local channels. Please check it again the SoC you use is Exynos7410
>>>> or other.
>>> You have referred DECON-EXT chapter. Kindly look into DECON-INT.
>
> Right, I referred to different IP.
>
>>>
>>>>>
>>>>>>> +
>>>>>>> +#define get_decon_manager(mgr)
>>>>>> platform_get_drvdata(to_platform_device(dev))
>>>>>>> +
>>>>>>> +struct decon_win_data {
>>>>>>> +     unsigned int            ovl_x;
>>>>>>> +     unsigned int            ovl_y;
>>>>>>> +     unsigned int            offset_x;
>>>>>>> +     unsigned int            offset_y;
>>>>>>> +     unsigned int            ovl_width;
>>>>>>> +     unsigned int            ovl_height;
>>>>>>> +     unsigned int            fb_width;
>>>>>>> +     unsigned int            fb_height;
>>>>>>> +     unsigned int            bpp;
>>>>>>> +     unsigned int            pixel_format;
>>>>>>> +     dma_addr_t              dma_addr;
>>>>>>> +     bool                    enabled;
>>>>>>> +     bool                    resume;
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct decon_context {
>>>>>>> +     struct device                   *dev;
>>>>>>> +     struct drm_device               *drm_dev;
>>>>>>> +     struct clk                      *pclk;
>>>>>>> +     struct clk                      *aclk;
>>>>>>> +     struct clk                      *eclk;
>>>>>>> +     struct clk                      *vclk;
>>>>>>> +     struct clk                      *dsd;
>>>>>>> +     struct clk                      *lh_disp1;
>>>>>>> +     struct clk                      *aclk_disp;
>>>>>>> +     struct clk                      *lh_disp0;
>>>>>>> +     void __iomem                    *regs;
>>>>>>> +     struct drm_display_mode         mode;
>>>>>>> +     struct decon_win_data           win_data[WINDOWS_NR];
>>>>>>> +     unsigned int                    default_win;
>>>>>>> +     unsigned long                   irq_flags;
>>>>>>> +     u32                             vidcon1;
>>>>>>> +     bool                            suspended;
>>>>>>> +     int                             pipe;
>>>>>>> +     wait_queue_head_t               wait_vsync_queue;
>>>>>>> +     atomic_t                        wait_vsync_event;
>>>>>>> +
>>>>>>> +     struct exynos_drm_panel_info panel;
>>>>>>> +};
>>>>>>> +
>>>>>>> +static const struct of_device_id decon_driver_dt_match[] = {
>>>>>>> +     { .compatible = "samsung,exynos7-decon"},
>>>>>>
>>>>>> WARNING: DT compatible string "samsung,exynos7-decon" appears
>>>>>> un-documented -- check ./Documentation/devicetree/bindings/
>>>>>>
>>>>>>> +     {},
>>>>>>> +};
>>>>>>> +MODULE_DEVICE_TABLE(of, decon_driver_dt_match);
>>>>>>> +
>>>>>>> +static void decon_wait_for_vblank(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +
>>>>>>> +     if (ctx->suspended)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     atomic_set(&ctx->wait_vsync_event, 1);
>>>>>>> +
>>>>>>> +     /*
>>>>>>> +      * wait for decon to signal VSYNC interrupt or return after
>>>>>>> +      * timeout which is set to 50ms (refresh rate of 20).
>>>>>>> +      */
>>>>>>> +     if (!wait_event_timeout(ctx->wait_vsync_queue,
>>>>>>> +                             !atomic_read(&ctx->wait_vsync_event),
>>>>>>> +                             HZ/20))
>>>>>>> +             DRM_DEBUG_KMS("vblank wait timed out.\n");
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_clear_channel(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     int win, ch_enabled = 0;
>>>>>>> +
>>>>>>> +     DRM_DEBUG_KMS("%s\n", __FILE__);
>>>>>>> +
>>>>>>> +     /* Check if any channel is enabled. */
>>>>>>> +     for (win = 0; win < WINDOWS_NR; win++) {
>>>>>>> +             u32 val = readl(ctx->regs + WINCON(win));
>>>>>>> +
>>>>>>> +             if (val & WINCONx_ENWIN) {
>>>>>>> +                     val &= ~WINCONx_ENWIN;
>>>>>>> +                     writel(val, ctx->regs + WINCON(win));
>>>>>>> +                     ch_enabled = 1;
>>>>>>> +             }
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     /* Wait for vsync, as disable channel takes effect at next vsync */
>>>>>>> +     if (ch_enabled) {
>>>>>>> +             unsigned int state = ctx->suspended;
>>>>>>> +
>>>>>>> +             ctx->suspended = 0;
>>>>>>> +             decon_wait_for_vblank(mgr);
>>>>>>> +             ctx->suspended = state;
>>>>>>> +     }
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_mgr_initialize(struct exynos_drm_manager *mgr,
>>>>>>> +                     struct drm_device *drm_dev)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct exynos_drm_private *priv = drm_dev->dev_private;
>>>>>>> +
>>>>>>> +     mgr->drm_dev = ctx->drm_dev = drm_dev;
>>>>>>> +     mgr->pipe = ctx->pipe = priv->pipe++;
>>>>>>> +
>>>>>>> +     /* attach this sub driver to iommu mapping if supported. */
>>>>>>> +     if (is_drm_iommu_supported(ctx->drm_dev)) {
>>>>>>> +             /*
>>>>>>> +              * If any channel is already active, iommu will throw
>>>>>>> +              * a PAGE FAULT when enabled. So clear any channel if enabled.
>>>>>>> +              */
>>>>>>> +             decon_clear_channel(mgr);
>>>>>>> +             drm_iommu_attach_device(ctx->drm_dev, ctx->dev);
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_mgr_remove(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +
>>>>>>> +     /* detach this sub driver from iommu mapping if supported. */
>>>>>>> +     if (is_drm_iommu_supported(ctx->drm_dev))
>>>>>>> +             drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static u32 decon_calc_clkdiv(struct decon_context *ctx,
>>>>>>> +             const struct drm_display_mode *mode)
>>>>>>> +{
>>>>>>> +     unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh;
>>>>>>> +     u32 clkdiv;
>>>>>>> +
>>>>>>> +     /* Find the clock divider value that gets us closest to ideal_clk */
>>>>>>> +     clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk);
>>>>>>> +
>>>>>>> +     return (clkdiv < 0x100) ? clkdiv : 0xff;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static bool decon_mode_fixup(struct exynos_drm_manager *mgr,
>>>>>>> +             const struct drm_display_mode *mode,
>>>>>>> +             struct drm_display_mode *adjusted_mode)
>>>>>>> +{
>>>>>>> +     if (adjusted_mode->vrefresh == 0)
>>>>>>> +             adjusted_mode->vrefresh = DECON_DEFAULT_FRAMERATE;
>>>>>>> +
>>>>>>> +     return true;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_mode_set(struct exynos_drm_manager *mgr,
>>>>>>> +             const struct drm_display_mode *in_mode)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +
>>>>>>> +     drm_mode_copy(&ctx->mode, in_mode);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_commit(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct drm_display_mode *mode = &ctx->mode;
>>>>>>> +     u32 val, clkdiv;
>>>>>>> +     int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
>>>>>>> +
>>>>>>> +     if (ctx->suspended)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     /* nothing to do if we haven't set the mode yet */
>>>>>>> +     if (mode->htotal == 0 || mode->vtotal == 0)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +      /* setup vertical timing values. */
>>>>>>> +     vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
>>>>>>> +     vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
>>>>>>> +     vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
>>>>>>> +
>>>>>>> +     val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
>>>>>>> +     writel(val, ctx->regs + VIDTCON0);
>>>>>>
>>>>>> Check VIDTCON0~3 registers. These registers of Exynos5433 and Exynos5430
>>>>>> have different offsets so you would need to consider the differences.
>>>>> Do I need to add support fofr Exynos5433 DECON also?
>>>>> I am not sure if I have a test setup!
>>>>>
>>>>
>>>> I think it would be enough that you consider other SoCs because they
>>>> could not be worked correctly with this driver. So you should consider
>>>> them somehow - DECON driver should cover all DECON controllers for
>>>> Exynos543x and Exynos74xx.
>>> You said there should be no separate DECON driver and the changes should be
>>> handled in FIMD driver itself. If that's the case, I can just add
>>> "samsung,exynos7-fimd"
>>> and someone will add "samsung, exynos5433-fimd" later when needed.
>
> We are working on Exynos5433 decon driver which is different from
> Exynos7 SoC so this driver will be separated also. Yes, it's enough to
> consider Exynos7 SoC for now.
Can you let me know how you are trying to add changes for Exynos5433?
I mean, is it one of the 3 ways I have mentioned above?

Ajay

>>>
>>> Ajay
>>>
>>>>>>> +
>>>>>>> +     val = VIDTCON1_VSPW(vsync_len - 1);
>>>>>>> +     writel(val, ctx->regs + VIDTCON1);
>>>>>>
>>>>>> Ditto
>>>>>>
>>>>>>> +
>>>>>>> +     /* setup horizontal timing values.  */
>>>>>>> +     hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
>>>>>>> +     hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
>>>>>>> +     hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
>>>>>>> +
>>>>>>> +     /* setup horizontal timing values.  */
>>>>>>> +     val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
>>>>>>> +     writel(val, ctx->regs + VIDTCON2);
>>>>>>
>>>>>> Ditto
>>>>>>
>>>>>>> +
>>>>>>> +     val = VIDTCON3_HSPW(hsync_len - 1);
>>>>>>> +     writel(val, ctx->regs + VIDTCON3);
>>>>>>
>>>>>> Ditto
>>>>>>
>>>>>>> +
>>>>>>> +     /* setup horizontal and vertical display size. */
>>>>>>> +     val = VIDTCON4_LINEVAL(mode->vdisplay - 1) |
>>>>>>> +            VIDTCON4_HOZVAL(mode->hdisplay - 1);
>>>>>>> +     writel(val, ctx->regs + VIDTCON4);
>>>>>>> +
>>>>>>> +     writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD);
>>>>>>> +
>>>>>>> +     /*
>>>>>>> +      * fields of register with prefix '_F' would be updated
>>>>>>> +      * at vsync(same as dma start)
>>>>>>> +      */
>>>>>>> +     val = VIDCON0_ENVID | VIDCON0_ENVID_F;
>>>>>>> +     writel(val, ctx->regs + VIDCON0);
>>>>>>> +
>>>>>>> +     clkdiv = decon_calc_clkdiv(ctx, mode);
>>>>>>> +     if (clkdiv > 1) {
>>>>>>> +             val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1);
>>>>>>> +             writel(val, ctx->regs + VCLKCON1);
>>>>>>> +             writel(val, ctx->regs + VCLKCON2);
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     val = readl(ctx->regs + DECON_UPDATE);
>>>>>>> +     val |= DECON_UPDATE_STANDALONE_F;
>>>>>>> +     writel(val, ctx->regs + DECON_UPDATE);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_enable_vblank(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     u32 val;
>>>>>>> +
>>>>>>> +     if (ctx->suspended)
>>>>>>> +             return -EPERM;
>>>>>>> +
>>>>>>> +     if (!test_and_set_bit(0, &ctx->irq_flags)) {
>>>>>>> +             val = readl(ctx->regs + VIDINTCON0);
>>>>>>> +
>>>>>>> +             val |= VIDINTCON0_INT_ENABLE;
>>>>>>> +             val |= VIDINTCON0_INT_FRAME;
>>>>>>> +
>>>>>>> +             val &= ~VIDINTCON0_FRAMESEL0_MASK;
>>>>>>> +             val |= VIDINTCON0_FRAMESEL0_VSYNC;
>>>>>>> +
>>>>>>> +             writel(val, ctx->regs + VIDINTCON0);
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_disable_vblank(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     u32 val;
>>>>>>> +
>>>>>>> +     if (ctx->suspended)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     if (test_and_clear_bit(0, &ctx->irq_flags)) {
>>>>>>> +             val = readl(ctx->regs + VIDINTCON0);
>>>>>>> +
>>>>>>> +             val &= ~VIDINTCON0_INT_FRAME;
>>>>>>> +             val &= ~VIDINTCON0_INT_ENABLE;
>>>>>>> +
>>>>>>> +             writel(val, ctx->regs + VIDINTCON0);
>>>>>>> +     }
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_win_mode_set(struct exynos_drm_manager *mgr,
>>>>>>> +                     struct exynos_drm_overlay *overlay)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct decon_win_data *win_data;
>>>>>>> +     int win, padding;
>>>>>>> +
>>>>>>> +     if (!overlay) {
>>>>>>> +             DRM_ERROR("overlay is NULL\n");
>>>>>>> +             return;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     win = overlay->zpos;
>>>>>>> +     if (win == DEFAULT_ZPOS)
>>>>>>> +             win = ctx->default_win;
>>>>>>> +
>>>>>>> +     if (win < 0 || win >= WINDOWS_NR)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +
>>>>>>> +     win_data = &ctx->win_data[win];
>>>>>>> +
>>>>>>> +     padding = (overlay->pitch / (overlay->bpp >> 3)) - overlay->fb_width;
>>>>>>> +     win_data->offset_x = overlay->fb_x;
>>>>>>> +     win_data->offset_y = overlay->fb_y;
>>>>>>> +     win_data->fb_width = overlay->fb_width + padding;
>>>>>>> +     win_data->fb_height = overlay->fb_height;
>>>>>>> +     win_data->ovl_x = overlay->crtc_x;
>>>>>>> +     win_data->ovl_y = overlay->crtc_y;
>>>>>>> +     win_data->ovl_width = overlay->crtc_width;
>>>>>>> +     win_data->ovl_height = overlay->crtc_height;
>>>>>>> +     win_data->dma_addr = overlay->dma_addr[0];
>>>>>>> +     win_data->bpp = overlay->bpp;
>>>>>>> +     win_data->pixel_format = overlay->pixel_format;
>>>>>>> +
>>>>>>> +     DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n",
>>>>>>> +                     win_data->offset_x, win_data->offset_y);
>>>>>>> +     DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>>>>>>> +                     win_data->ovl_width, win_data->ovl_height);
>>>>>>> +     DRM_DEBUG_KMS("paddr = 0x%lx\n", (unsigned long)win_data->dma_addr);
>>>>>>> +     DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n",
>>>>>>> +                     overlay->fb_width, overlay->crtc_width);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned
>>>>>> int win)
>>>>>>> +{
>>>>>>> +     struct decon_win_data *win_data = &ctx->win_data[win];
>>>>>>> +     unsigned long val;
>>>>>>> +
>>>>>>> +     val = readl(ctx->regs + WINCON(win));
>>>>>>> +     val &= ~WINCONx_BPPMODE_MASK;
>>>>>>> +
>>>>>>> +     switch (win_data->pixel_format) {
>>>>>>> +     case DRM_FORMAT_RGB565:
>>>>>>> +             val |= WINCONx_BPPMODE_16BPP_565;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_XRGB8888:
>>>>>>> +             val |= WINCONx_BPPMODE_24BPP_xRGB;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_XBGR8888:
>>>>>>> +             val |= WINCONx_BPPMODE_24BPP_xBGR;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_RGBX8888:
>>>>>>> +             val |= WINCONx_BPPMODE_24BPP_RGBx;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_BGRX8888:
>>>>>>> +             val |= WINCONx_BPPMODE_24BPP_BGRx;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_ARGB8888:
>>>>>>> +             val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX |
>>>>>>> +                     WINCONx_ALPHA_SEL;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_ABGR8888:
>>>>>>> +             val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX |
>>>>>>> +                     WINCONx_ALPHA_SEL;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_RGBA8888:
>>>>>>> +             val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX |
>>>>>>> +                     WINCONx_ALPHA_SEL;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     case DRM_FORMAT_BGRA8888:
>>>>>>> +             val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX |
>>>>>>> +                     WINCONx_ALPHA_SEL;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     default:
>>>>>>> +             DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n");
>>>>>>> +
>>>>>>> +             val |= WINCONx_BPPMODE_24BPP_xRGB;
>>>>>>> +             val |= WINCONx_BURSTLEN_16WORD;
>>>>>>> +             break;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp);
>>>>>>> +
>>>>>>> +     /*
>>>>>>> +      * In case of exynos, setting dma-burst to 16Word causes permanent
>>>>>>> +      * tearing for very small buffers, e.g. cursor buffer. Burst Mode
>>>>>>> +      * switching which is based on overlay size is not recommended as
>>>>>>> +      * overlay size varies alot towards the end of the screen and rapid
>>>>>>
>>>>>> WARNING: 'alot' may be misspelled - perhaps 'a lot'?
>>>>>>
>>>>>>> +      * movement causes unstable DMA which results into iommu crash/tear.
>>>>>>> +      */
>>>>>>> +
>>>>>>> +     if (win_data->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
>>>>>>> +             val &= ~WINCONx_BURSTLEN_MASK;
>>>>>>> +             val |= WINCONx_BURSTLEN_8WORD;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     writel(val, ctx->regs + WINCON(win));
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_win_set_colkey(struct decon_context *ctx, unsigned
>>>>>> int win)
>>>>>>> +{
>>>>>>> +     unsigned int keycon0 = 0, keycon1 = 0;
>>>>>>> +
>>>>>>> +     keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
>>>>>>> +                     WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
>>>>>>> +
>>>>>>> +     keycon1 = WxKEYCON1_COLVAL(0xffffffff);
>>>>>>> +
>>>>>>> +     writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
>>>>>>> +     writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
>>>>>>> +}
>>>>>>> +
>>>>>>> +/**
>>>>>>> + * shadow_protect_win() - disable updating values from shadow
>>>>>> registers at vsync
>>>>>>> + *
>>>>>>> + * @win: window to protect registers for
>>>>>>> + * @protect: 1 to protect (disable updates)
>>>>>>> + */
>>>>>>> +static void decon_shadow_protect_win(struct decon_context *ctx,
>>>>>>> +                                                     int win, bool protect)
>>>>>>> +{
>>>>>>> +     u32 reg, bits, val;
>>>>>>> +
>>>>>>> +     reg = SHADOWCON;
>>>>>>> +     bits = SHADOWCON_WINx_PROTECT(win);
>>>>>>> +
>>>>>>> +     val = readl(ctx->regs + reg);
>>>>>>> +     if (protect)
>>>>>>> +             val |= bits;
>>>>>>> +     else
>>>>>>> +             val &= ~bits;
>>>>>>> +     writel(val, ctx->regs + reg);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_win_commit(struct exynos_drm_manager *mgr, int zpos)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct decon_win_data *win_data;
>>>>>>> +     int win = zpos;
>>>>>>> +     unsigned long val, alpha, blendeq;
>>>>>>> +     unsigned int last_x;
>>>>>>> +     unsigned int last_y;
>>>>>>> +
>>>>>>> +     if (ctx->suspended)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     if (win == DEFAULT_ZPOS)
>>>>>>> +             win = ctx->default_win;
>>>>>>> +
>>>>>>> +     if (win < 0 || win >= WINDOWS_NR)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     win_data = &ctx->win_data[win];
>>>>>>> +
>>>>>>> +     /* If suspended, enable this on resume */
>>>>>>> +     if (ctx->suspended) {
>>>>>>> +             win_data->resume = true;
>>>>>>> +             return;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     /*
>>>>>>> +      * SHADOWCON/PRTCON register is used for enabling timing.
>>>>>>> +      *
>>>>>>> +      * for example, once only width value of a register is set,
>>>>>>> +      * if the dma is started then decon hardware could malfunction so
>>>>>>> +      * with protect window setting, the register fields with prefix '_F'
>>>>>>> +      * wouldn't be updated at vsync also but updated once unprotect window
>>>>>>> +      * is set.
>>>>>>> +      */
>>>>>>> +
>>>>>>> +     /* protect windows */
>>>>>>> +     decon_shadow_protect_win(ctx, win, true);
>>>>>>> +
>>>>>>> +     /* buffer start address */
>>>>>>> +     val = (unsigned long)win_data->dma_addr;
>>>>>>> +     writel(val, ctx->regs + VIDW_BUF_START(win));
>>>>>>> +
>>>>>>> +     /* buffer size */
>>>>>>> +     writel(win_data->fb_width, ctx->regs + VIDW_WHOLE_X(win));
>>>>>>> +     writel(win_data->fb_height, ctx->regs + VIDW_WHOLE_Y(win));
>>>>>>> +
>>>>>>> +     /* offset from the start of the buffer read */
>>>>>>> +     writel(win_data->offset_x, ctx->regs + VIDW_OFFSET_X(win));
>>>>>>> +     writel(win_data->offset_y, ctx->regs + VIDW_OFFSET_Y(win));
>>>>>>> +
>>>>>>> +     DRM_DEBUG_KMS("start addr = 0x%lx\n",
>>>>>>> +                     (unsigned long)win_data->dma_addr);
>>>>>>> +     DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>>>>>>> +                     win_data->ovl_width, win_data->ovl_height);
>>>>>>> +
>>>>>>> +     /* OSD position */
>>>>>>> +     val = VIDOSDxA_TOPLEFT_X(win_data->ovl_x) |
>>>>>>> +             VIDOSDxA_TOPLEFT_Y(win_data->ovl_y);
>>>>>>> +     writel(val, ctx->regs + VIDOSD_A(win));
>>>>>>> +
>>>>>>> +     last_x = win_data->ovl_x + win_data->ovl_width;
>>>>>>> +     if (last_x)
>>>>>>> +             last_x--;
>>>>>>> +     last_y = win_data->ovl_y + win_data->ovl_height;
>>>>>>> +     if (last_y)
>>>>>>> +             last_y--;
>>>>>>> +
>>>>>>> +     val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y);
>>>>>>> +
>>>>>>> +     writel(val, ctx->regs + VIDOSD_B(win));
>>>>>>> +
>>>>>>> +     DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
>>>>>>> +                     win_data->ovl_x, win_data->ovl_y, last_x, last_y);
>>>>>>> +
>>>>>>> +             /* OSD alpha */
>>>>>>> +             alpha = VIDOSDxC_ALPHA0_R_F(0x0) |
>>>>>>> +                             VIDOSDxC_ALPHA0_G_F(0x0) |
>>>>>>> +                             VIDOSDxC_ALPHA0_B_F(0x0);
>>>>>>> +
>>>>>>> +             writel(alpha, ctx->regs + VIDOSD_C(win));
>>>>>>> +
>>>>>>> +             alpha = VIDOSDxD_ALPHA1_R_F(0xff) |
>>>>>>> +                             VIDOSDxD_ALPHA1_G_F(0xff) |
>>>>>>> +                             VIDOSDxD_ALPHA1_B_F(0xff);
>>>>>>> +
>>>>>>> +             writel(alpha, ctx->regs + VIDOSD_D(win));
>>>>>>> +
>>>>>>> +     if (win != 0) {
>>>>>>> +             blendeq = BLENDE_A_FUNC(BLENDE_COEF_ONE) |
>>>>>>> +                     BLENDE_B_FUNC(BLENDE_COEF_ZERO) |
>>>>>>> +                     BLENDE_P_FUNC(BLENDE_COEF_ZERO) |
>>>>>>> +                     BLENDE_Q_FUNC(BLENDE_COEF_ZERO);
>>>>>>> +
>>>>>>> +             writel(blendeq, ctx->regs + BLENDE(win - 1));
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     decon_win_set_pixfmt(ctx, win);
>>>>>>> +
>>>>>>> +     /* hardware window 0 doesn't support color key. */
>>>>>>> +     if (win != 0)
>>>>>>> +             decon_win_set_colkey(ctx, win);
>>>>>>> +
>>>>>>> +     /* wincon */
>>>>>>> +     val = readl(ctx->regs + WINCON(win));
>>>>>>> +     val |= WINCONx_TRIPLE_BUF_MODE;
>>>>>>> +     val |= WINCONx_ENWIN;
>>>>>>> +     writel(val, ctx->regs + WINCON(win));
>>>>>>> +
>>>>>>> +     /* Enable DMA channel and unprotect windows */
>>>>>>> +     decon_shadow_protect_win(ctx, win, false);
>>>>>>> +
>>>>>>> +     val = readl(ctx->regs + DECON_UPDATE);
>>>>>>> +     val |= DECON_UPDATE_STANDALONE_F;
>>>>>>> +     writel(val, ctx->regs + DECON_UPDATE);
>>>>>>> +
>>>>>>> +     win_data->enabled = true;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_win_disable(struct exynos_drm_manager *mgr, int zpos)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct decon_win_data *win_data;
>>>>>>> +     int win = zpos;
>>>>>>> +     u32 val;
>>>>>>> +
>>>>>>> +     if (win == DEFAULT_ZPOS)
>>>>>>> +             win = ctx->default_win;
>>>>>>> +
>>>>>>> +     if (win < 0 || win >= WINDOWS_NR)
>>>>>>> +             return;
>>>>>>> +
>>>>>>> +     win_data = &ctx->win_data[win];
>>>>>>> +
>>>>>>> +     if (ctx->suspended) {
>>>>>>> +             /* do not resume this window*/
>>>>>>> +             win_data->resume = false;
>>>>>>> +             return;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     /* protect windows */
>>>>>>> +     decon_shadow_protect_win(ctx, win, true);
>>>>>>> +
>>>>>>> +     /* wincon */
>>>>>>> +     val = readl(ctx->regs + WINCON(win));
>>>>>>> +     val &= ~WINCONx_ENWIN;
>>>>>>> +     writel(val, ctx->regs + WINCON(win));
>>>>>>> +
>>>>>>> +     decon_shadow_protect_win(ctx, win, false);
>>>>>>> +
>>>>>>> +     win_data->enabled = false;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_window_suspend(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct decon_win_data *win_data;
>>>>>>> +     int i;
>>>>>>> +
>>>>>>> +     for (i = 0; i < WINDOWS_NR; i++) {
>>>>>>> +             win_data = &ctx->win_data[i];
>>>>>>> +             win_data->resume = win_data->enabled;
>>>>>>> +             if (win_data->enabled)
>>>>>>> +                     decon_win_disable(mgr, i);
>>>>>>> +     }
>>>>>>> +     decon_wait_for_vblank(mgr);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_window_resume(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct decon_win_data *win_data;
>>>>>>> +     int i;
>>>>>>> +
>>>>>>> +     for (i = 0; i < WINDOWS_NR; i++) {
>>>>>>> +             win_data = &ctx->win_data[i];
>>>>>>> +             win_data->enabled = win_data->resume;
>>>>>>> +             win_data->resume = false;
>>>>>>> +     }
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_apply(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     struct decon_win_data *win_data;
>>>>>>> +     int i;
>>>>>>> +
>>>>>>> +     for (i = 0; i < WINDOWS_NR; i++) {
>>>>>>> +             win_data = &ctx->win_data[i];
>>>>>>> +             if (win_data->enabled)
>>>>>>> +                     decon_win_commit(mgr, i);
>>>>>>> +             else
>>>>>>> +                     decon_win_disable(mgr, i);
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     decon_commit(mgr);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_reg_reset(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     int tries = RESET_TIMEOUT;
>>>>>>> +
>>>>>>> +     writel(VIDCON0_SWRESET, ctx->regs + VIDCON0);
>>>>>>> +
>>>>>>> +     while (tries) {
>>>>>>> +             if (!(readl(ctx->regs + VIDCON0) & VIDCON0_SWRESET))
>>>>>>> +                     break;
>>>>>>> +             udelay(10);
>>>>>>> +             tries--;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     if (!tries) {
>>>>>>> +             DRM_ERROR("Failed to reset decon\n");
>>>>>>> +             return -EBUSY;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_cmu_enable(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     writel(~DECON_CMU_ALL_CLKGATE_ENABLE, ctx->regs + DECON_CMU);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_blend_alpha_bits(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     writel(BLENDCON_NEW_8BIT_ALPHA_VALUE, ctx->regs + BLENDCON);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_set_vidout(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     writel(VIDOUTCON0_LCD_ON | VIDOUTCON0_RGBIF, ctx->regs + VIDOUTCON0);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_set_crc(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     u32 val = readl(ctx->regs + CRCCTRL);
>>>>>>> +
>>>>>>> +     writel(val & ~(CRCCTRL_CRCCLKEN | CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F),
>>>>>>> +                                                     ctx->regs + CRCCTRL);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_set_clkval(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_set_fixvclk(struct decon_context *ctx)
>>>>>>> +{
>>>>>>> +     writel(ctx->vidcon1, ctx->regs + VIDCON1(0));
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_poweron(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +     int ret;
>>>>>>> +
>>>>>>> +     if (!ctx->suspended)
>>>>>>> +             return 0;
>>>>>>> +
>>>>>>> +     ctx->suspended = false;
>>>>>>> +
>>>>>>> +     pm_runtime_get_sync(ctx->dev);
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->pclk);
>>>>>>> +     if (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret);
>>>>>>> +             goto pclk_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->aclk);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret);
>>>>>>> +             goto aclk_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->eclk);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret);
>>>>>>> +             goto eclk_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->vclk);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret);
>>>>>>> +             goto vclk_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->dsd);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the dsd [%d]\n", ret);
>>>>>>> +             goto dsd_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->lh_disp1);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the lh_disp1 [%d]\n", ret);
>>>>>>> +             goto lh_disp1_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->aclk_disp);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the aclk_disp [%d]\n", ret);
>>>>>>> +             goto aclk_disp_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = clk_prepare_enable(ctx->lh_disp0);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to prepare_enable the lh_disp0 [%d]\n", ret);
>>>>>>> +             goto lh_disp0_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = decon_reg_reset(mgr->ctx);
>>>>>>> +     if  (ret < 0) {
>>>>>>> +             DRM_ERROR("Failed to reset decon [%d]\n", ret);
>>>>>>> +             goto lh_disp0_err;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     decon_cmu_enable(mgr->ctx);
>>>>>>> +     decon_blend_alpha_bits(mgr->ctx);
>>>>>>> +     decon_set_vidout(mgr->ctx);
>>>>>>> +     decon_set_crc(mgr->ctx);
>>>>>>> +     decon_set_fixvclk(mgr->ctx);
>>>>>>> +     decon_set_clkval(mgr->ctx);
>>>>>>> +
>>>>>>> +     /* if vblank was enabled status, enable it again. */
>>>>>>> +     if (test_and_clear_bit(0, &ctx->irq_flags)) {
>>>>>>> +             ret = decon_enable_vblank(mgr);
>>>>>>> +             if (ret) {
>>>>>>> +                     DRM_ERROR("Failed to re-enable vblank [%d]\n", ret);
>>>>>>> +                     goto enable_vblank_err;
>>>>>>> +             }
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     decon_window_resume(mgr);
>>>>>>> +
>>>>>>> +     decon_apply(mgr);
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +
>>>>>>> +enable_vblank_err:
>>>>>>> +     clk_disable_unprepare(ctx->lh_disp0);
>>>>>>> +lh_disp0_err:
>>>>>>> +     clk_disable_unprepare(ctx->aclk_disp);
>>>>>>> +aclk_disp_err:
>>>>>>> +     clk_disable_unprepare(ctx->lh_disp1);
>>>>>>> +lh_disp1_err:
>>>>>>> +     clk_disable_unprepare(ctx->dsd);
>>>>>>> +dsd_err:
>>>>>>> +     clk_disable_unprepare(ctx->vclk);
>>>>>>> +vclk_err:
>>>>>>> +     clk_disable_unprepare(ctx->eclk);
>>>>>>> +eclk_err:
>>>>>>> +     clk_disable_unprepare(ctx->aclk);
>>>>>>> +aclk_err:
>>>>>>> +     clk_disable_unprepare(ctx->pclk);
>>>>>>> +pclk_err:
>>>>>>> +     ctx->suspended = true;
>>>>>>> +     return ret;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_poweroff(struct exynos_drm_manager *mgr)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = mgr->ctx;
>>>>>>> +
>>>>>>> +     if (ctx->suspended)
>>>>>>> +             return 0;
>>>>>>> +
>>>>>>> +     /*
>>>>>>> +      * We need to make sure that all windows are disabled before we
>>>>>>> +      * suspend that connector. Otherwise we might try to scan from
>>>>>>> +      * a destroyed buffer later.
>>>>>>> +      */
>>>>>>> +     decon_window_suspend(mgr);
>>>>>>> +
>>>>>>> +     clk_disable_unprepare(ctx->pclk);
>>>>>>> +     clk_disable_unprepare(ctx->aclk);
>>>>>>> +     clk_disable_unprepare(ctx->eclk);
>>>>>>> +     clk_disable_unprepare(ctx->vclk);
>>>>>>> +     clk_disable_unprepare(ctx->dsd);
>>>>>>> +     clk_disable_unprepare(ctx->lh_disp1);
>>>>>>> +     clk_disable_unprepare(ctx->aclk_disp);
>>>>>>> +     clk_disable_unprepare(ctx->lh_disp0);
>>>>>>> +
>>>>>>> +     pm_runtime_put_sync(ctx->dev);
>>>>>>> +
>>>>>>> +     ctx->suspended = true;
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_dpms(struct exynos_drm_manager *mgr, int mode)
>>>>>>> +{
>>>>>>> +     DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode);
>>>>>>> +
>>>>>>> +     switch (mode) {
>>>>>>> +     case DRM_MODE_DPMS_ON:
>>>>>>> +             decon_poweron(mgr);
>>>>>>> +             break;
>>>>>>> +     case DRM_MODE_DPMS_STANDBY:
>>>>>>> +     case DRM_MODE_DPMS_SUSPEND:
>>>>>>> +     case DRM_MODE_DPMS_OFF:
>>>>>>> +             decon_poweroff(mgr);
>>>>>>> +             break;
>>>>>>> +     default:
>>>>>>> +             DRM_DEBUG_KMS("unspecified mode %d\n", mode);
>>>>>>> +             break;
>>>>>>> +     }
>>>>>>> +}
>>>>>>> +
>>>>>>> +static struct exynos_drm_manager_ops decon_manager_ops = {
>>>>>>> +     .dpms = decon_dpms,
>>>>>>> +     .mode_fixup = decon_mode_fixup,
>>>>>>> +     .mode_set = decon_mode_set,
>>>>>>> +     .commit = decon_commit,
>>>>>>> +     .enable_vblank = decon_enable_vblank,
>>>>>>> +     .disable_vblank = decon_disable_vblank,
>>>>>>> +     .wait_for_vblank = decon_wait_for_vblank,
>>>>>>> +     .win_mode_set = decon_win_mode_set,
>>>>>>> +     .win_commit = decon_win_commit,
>>>>>>> +     .win_disable = decon_win_disable,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static struct exynos_drm_manager decon_manager = {
>>>>>>> +     .type = EXYNOS_DISPLAY_TYPE_LCD,
>>>>>>> +     .ops = &decon_manager_ops,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static irqreturn_t decon_irq_handler(int irq, void *dev_id)
>>>>>>> +{
>>>>>>> +     struct decon_context *ctx = (struct decon_context *)dev_id;
>>>>>>> +     u32 val;
>>>>>>> +
>>>>>>> +     val = readl(ctx->regs + VIDINTCON1);
>>>>>>> +
>>>>>>> +     if (val & VIDINTCON1_INT_FRAME)
>>>>>>> +             /* VSYNC interrupt */
>>>>>>> +             writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1);
>>>>>>> +
>>>>>>> +     /* check the crtc is detached already from encoder */
>>>>>>> +     if (ctx->pipe < 0 || !ctx->drm_dev)
>>>>>>> +             goto out;
>>>>>>> +
>>>>>>> +     drm_handle_vblank(ctx->drm_dev, ctx->pipe);
>>>>>>> +     exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
>>>>>>> +
>>>>>>> +     /* set wait vsync event to zero and wake up queue. */
>>>>>>> +     if (atomic_read(&ctx->wait_vsync_event)) {
>>>>>>> +             atomic_set(&ctx->wait_vsync_event, 0);
>>>>>>> +             wake_up(&ctx->wait_vsync_queue);
>>>>>>> +     }
>>>>>>> +out:
>>>>>>> +     return IRQ_HANDLED;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_bind(struct device *dev, struct device *master, void
>>>>>> *data)
>>>>>>> +{
>>>>>>> +     struct drm_device *drm_dev = data;
>>>>>>> +
>>>>>>> +     decon_mgr_initialize(&decon_manager, drm_dev);
>>>>>>> +     exynos_drm_crtc_create(&decon_manager);
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void decon_unbind(struct device *dev, struct device *master,
>>>>>>> +                     void *data)
>>>>>>> +{
>>>>>>> +     struct exynos_drm_manager *mgr = dev_get_drvdata(dev);
>>>>>>> +
>>>>>>> +     decon_dpms(mgr, DRM_MODE_DPMS_OFF);
>>>>>>> +     decon_mgr_remove(mgr);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct component_ops decon_component_ops = {
>>>>>>> +     .bind   = decon_bind,
>>>>>>> +     .unbind = decon_unbind,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static int decon_probe(struct platform_device *pdev)
>>>>>>> +{
>>>>>>> +     struct device *dev = &pdev->dev;
>>>>>>> +     struct decon_context *ctx;
>>>>>>> +     struct resource *res;
>>>>>>> +     int ret = -EINVAL;
>>>>>>> +
>>>>>>> +     ret = exynos_drm_component_add(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC,
>>>>>>> +                                     decon_manager.type);
>>>>>>> +     if (ret)
>>>>>>> +             return ret;
>>>>>>> +
>>>>>>> +     if (!dev->of_node) {
>>>>>>> +             ret = -ENODEV;
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>>>>>>> +     if (!ctx) {
>>>>>>> +             ret = -ENOMEM;
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->dev = dev;
>>>>>>> +     ctx->suspended = true;
>>>>>>> +
>>>>>>
>>>>>> You would also need to consider to configure DSD_CFG_MUX register using
>>>>>> mfd/syscon interfaces.
>>>>> I have not configured it till now for Exynos7, but for me display works fine!
>>>>>
>>>>>>> +     ctx->pclk = devm_clk_get(dev, "pclk_decon0");
>>>>>>> +     if (IS_ERR(ctx->pclk)) {
>>>>>>> +             dev_err(dev, "failed to get bus clock\n");
>>>>>>> +             ret = PTR_ERR(ctx->pclk);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->aclk = devm_clk_get(dev, "aclk_decon0");
>>>>>>> +     if (IS_ERR(ctx->aclk)) {
>>>>>>> +             dev_err(dev, "failed to get aclock\n");
>>>>>>> +             ret = PTR_ERR(ctx->aclk);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->eclk = devm_clk_get(dev, "decon0_eclk");
>>>>>>> +     if (IS_ERR(ctx->eclk)) {
>>>>>>> +             dev_err(dev, "failed to get eclock\n");
>>>>>>> +             ret = PTR_ERR(ctx->eclk);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->vclk = devm_clk_get(dev, "decon0_vclk");
>>>>>>> +     if (IS_ERR(ctx->vclk)) {
>>>>>>> +             dev_err(dev, "failed to get vclock\n");
>>>>>>> +             ret = PTR_ERR(ctx->vclk);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->dsd = devm_clk_get(dev, "sclk_dsd");
>>>>>>> +     if (IS_ERR(ctx->dsd)) {
>>>>>>> +             dev_err(dev, "failed to get dsd clock\n");
>>>>>>> +             ret = PTR_ERR(ctx->dsd);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->lh_disp1 = devm_clk_get(dev, "aclk_lh_disp1");
>>>>>>> +     if (IS_ERR(ctx->lh_disp1)) {
>>>>>>> +             dev_err(dev, "failed to get lh_disp1 clock\n");
>>>>>>> +             ret = PTR_ERR(ctx->lh_disp1);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->aclk_disp = devm_clk_get(dev, "aclk_disp");
>>>>>>> +     if (IS_ERR(ctx->aclk_disp)) {
>>>>>>> +             dev_err(dev, "failed to get aclk_disp clock\n");
>>>>>>> +             ret = PTR_ERR(ctx->aclk_disp);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ctx->lh_disp0 = devm_clk_get(dev, "aclk_lh_disp0");
>>>>>>> +     if (IS_ERR(ctx->lh_disp0)) {
>>>>>>> +             dev_err(dev, "failed to get lh_disp0 clock\n");
>>>>>>> +             ret = PTR_ERR(ctx->lh_disp0);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>>>> +
>>>>>>> +     ctx->regs = devm_ioremap_resource(dev, res);
>>>>>>> +     if (IS_ERR(ctx->regs)) {
>>>>>>> +             ret = PTR_ERR(ctx->regs);
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "vsync");
>>>>>>> +     if (!res) {
>>>>>>> +             dev_err(dev, "irq request failed.\n");
>>>>>>> +             ret = -ENXIO;
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     ret = devm_request_irq(dev, res->start, decon_irq_handler,
>>>>>>> +                                                     0, "drm_decon", ctx);
>>>>>>> +     if (ret) {
>>>>>>> +             dev_err(dev, "irq request failed.\n");
>>>>>>> +             goto err_del_component;
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     init_waitqueue_head(&ctx->wait_vsync_queue);
>>>>>>> +     atomic_set(&ctx->wait_vsync_event, 0);
>>>>>>> +
>>>>>>> +     platform_set_drvdata(pdev, &decon_manager);
>>>>>>> +
>>>>>>> +     decon_manager.ctx = ctx;
>>>>>>> +
>>>>>>> +     pm_runtime_enable(&pdev->dev);
>>>>>>> +
>>>>>>> +     ret = component_add(&pdev->dev, &decon_component_ops);
>>>>>>> +     if (ret)
>>>>>>> +             goto err_disable_pm_runtime;
>>>>>>> +
>>>>>>> +     return ret;
>>>>>>> +
>>>>>>> +err_disable_pm_runtime:
>>>>>>> +     pm_runtime_disable(&pdev->dev);
>>>>>>> +
>>>>>>> +err_del_component:
>>>>>>> +     exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
>>>>>>> +     return ret;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int decon_remove(struct platform_device *pdev)
>>>>>>> +{
>>>>>>> +     pm_runtime_disable(&pdev->dev);
>>>>>>> +
>>>>>>> +     component_del(&pdev->dev, &decon_component_ops);
>>>>>>> +     exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +struct platform_driver decon_driver = {
>>>>>>> +     .probe          = decon_probe,
>>>>>>> +     .remove         = decon_remove,
>>>>>>> +     .driver         = {
>>>>>>> +             .name   = "exynos-decon",
>>>>>>> +             .owner  = THIS_MODULE,
>>>>>>> +             .of_match_table = decon_driver_dt_match,
>>>>>>> +     },
>>>>>>> +};
>>>>>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>>>>>> b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>>>>>>> index 443a206..44bdc42 100644
>>>>>>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>>>>>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>>>>>>> @@ -557,10 +557,16 @@ static int exynos_drm_platform_probe(struct
>>>>>> platform_device *pdev)
>>>>>>>               return ret;
>>>>>>>  #endif
>>>>>>>
>>>>>>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>>>>>>> +     ret = platform_driver_register(&decon_driver);
>>>>>>> +     if (ret < 0)
>>>>>>> +             goto err_unregister_fimd_drv;
>>>>>>> +#endif
>>>>>>> +
>>>>>>>  #ifdef CONFIG_DRM_EXYNOS_DP
>>>>>>>       ret = platform_driver_register(&dp_driver);
>>>>>>>       if (ret < 0)
>>>>>>> -             goto err_unregister_fimd_drv;
>>>>>>> +             goto err_unregister_decon_drv;
>>>>>>>  #endif
>>>>>>>
>>>>>>>  #ifdef CONFIG_DRM_EXYNOS_DSI
>>>>>>> @@ -668,6 +674,11 @@ err_unregister_dp_drv:
>>>>>>>
>>>>>>>  #ifdef CONFIG_DRM_EXYNOS_DP
>>>>>>>       platform_driver_unregister(&dp_driver);
>>>>>>> +err_unregister_decon_drv:
>>>>>>> +#endif
>>>>>>> +
>>>>>>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>>>>>>> +     platform_driver_unregister(&decon_driver);
>>>>>>>  err_unregister_fimd_drv:
>>>>>>>  #endif
>>>>>>>
>>>>>>> @@ -709,6 +720,10 @@ static int exynos_drm_platform_remove(struct
>>>>>> platform_device *pdev)
>>>>>>>       platform_driver_unregister(&fimd_driver);
>>>>>>>  #endif
>>>>>>>
>>>>>>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>>>>>>> +     platform_driver_unregister(&decon_driver);
>>>>>>> +#endif
>>>>>>> +
>>>>>>>  #ifdef CONFIG_DRM_EXYNOS_DSI
>>>>>>>       platform_driver_unregister(&dsi_driver);
>>>>>>>  #endif
>>>>>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>>>>>> b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>>>>>>> index d22e640..25f750d 100644
>>>>>>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>>>>>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>>>>>>> @@ -352,6 +352,16 @@ int exynos_drm_probe_vidi(void);
>>>>>>>   */
>>>>>>>  void exynos_drm_remove_vidi(void);
>>>>>>>
>>>>>>> +/*
>>>>>>> + * this function registers exynos drm decon platform device/driver.
>>>>>>> + */
>>>>>>> +int exynos_drm_probe_decon(void);
>>>>>>> +
>>>>>>> +/*
>>>>>>> + * this function unregister exynos drm decon platform device/driver.
>>>>>>> + */
>>>>>>> +void exynos_drm_remove_decon(void);
>>>>>>> +
>>>>>>>  /* This function creates a encoder and a connector, and initializes
>>>>>> them. */
>>>>>>>  int exynos_drm_create_enc_conn(struct drm_device *dev,
>>>>>>>                               struct exynos_drm_display *display);
>>>>>>> @@ -364,6 +374,7 @@ void exynos_drm_component_del(struct device *dev,
>>>>>>>                               enum exynos_drm_device_type dev_type);
>>>>>>>
>>>>>>>  extern struct platform_driver fimd_driver;
>>>>>>> +extern struct platform_driver decon_driver;
>>>>>>>  extern struct platform_driver dp_driver;
>>>>>>>  extern struct platform_driver dsi_driver;
>>>>>>>  extern struct platform_driver mixer_driver;
>>>>>>> diff --git a/include/video/samsung_decon.h b/include/video/samsung_decon.h
>>>>>>> new file mode 100644
>>>>>>> index 0000000..8839120
>>>>>>> --- /dev/null
>>>>>>> +++ b/include/video/samsung_decon.h
>>>>>>> @@ -0,0 +1,346 @@
>>>>>>> +/* include/video/exynos_drm_decon.h
>>>>>>> + *
>>>>>>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>>>>>>> + * Author: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>>>>>>> + *
>>>>>>> + * This program is free software; you can redistribute  it and/or
>>>>>> modify it
>>>>>>> + * under  the terms of  the GNU General  Public License as published
>>>>>> by the
>>>>>>> + * Free Software Foundation;  either version 2 of the  License, or
>>>>>> (at your
>>>>>>> + * option) any later version.
>>>>>>> + */
>>>>>>> +
>>>>>>> +/* VIDCON0 */
>>>>>>> +#define VIDCON0                                      (0x00)
>>>>>>> +
>>>>>>> +#define VIDCON0_SWRESET                              (1 << 28)
>>>>>>> +#define VIDCON0_DECON_STOP_STATUS            (1 << 2)
>>>>>>> +#define VIDCON0_ENVID                                (1 << 1)
>>>>>>> +#define VIDCON0_ENVID_F                              (1 << 0)
>>>>>>> +
>>>>>>> +/* VIDOUTCON0 */
>>>>>>> +#define VIDOUTCON0                           (0x4)
>>>>>>> +
>>>>>>> +#define VIDOUTCON0_LCD_ON                    (0x1 << 24)
>>>>>>> +#define VIDOUTCON0_LCD_OFF                   (0x0 << 24)
>>>>>>> +#define VIDOUTCON0_IF_SHIFT                  (23)
>>>>>>> +#define VIDOUTCON0_IF_MASK                   (0x1 << 23)
>>>>>>> +#define VIDOUTCON0_RGBIF                     (0x0 << 23)
>>>>>>> +#define VIDOUTCON0_I80IF                     (0x1 << 23)
>>>>>>> +
>>>>>>> +/* VIDCON3 */
>>>>>>> +#define VIDCON3                                      (0x8)
>>>>>>> +
>>>>>>> +/* VIDCON4 */
>>>>>>> +#define VIDCON4                                      (0xC)
>>>>>>> +#define VIDCON4_FIFOCNT_START_EN             (1 << 0)
>>>>>>> +
>>>>>>> +/* VCLKCON0 */
>>>>>>> +#define VCLKCON0                             0x10
>>>>>>> +#define VCLKCON0_CLKVALUP                    (1 << 8)
>>>>>>> +#define VCLKCON0_VCLKFREE                    (1 << 0)
>>>>>>> +
>>>>>>> +/* VCLKCON */
>>>>>>> +#define VCLKCON1                             0x14
>>>>>>> +#define VCLKCON1_CLKVAL_NUM_VCLK(val)                (((val) & 0xff) << 0)
>>>>>>> +#define VCLKCON2                             0x18
>>>>>>> +
>>>>>>> +/* SHADOWCON */
>>>>>>> +#define SHADOWCON                            (0x30)
>>>>>>> +
>>>>>>> +#define SHADOWCON_WINx_PROTECT(_win)         (1 << (10 + (_win)))
>>>>>>> +
>>>>>>> +/* WINCONx */
>>>>>>> +#define WINCON(_win)                         (0x50 + ((_win) * 4))
>>>>>>> +
>>>>>>> +#define WINCONx_BUFSTATUS                    (0x3 << 30)
>>>>>>> +#define WINCONx_BUFSEL_MASK                  (0x3 << 28)
>>>>>>> +#define WINCONx_BUFSEL_SHIFT                 (28)
>>>>>>> +#define WINCONx_TRIPLE_BUF_MODE                      (0x1 << 18)
>>>>>>> +#define WINCONx_DOUBLE_BUF_MODE                      (0x0 << 18)
>>>>>>> +#define WINCONx_BURSTLEN_16WORD                      (0x0 << 11)
>>>>>>> +#define WINCONx_BURSTLEN_8WORD                       (0x1 << 11)
>>>>>>> +#define WINCONx_BURSTLEN_MASK                        (0x1 << 11)
>>>>>>> +#define WINCONx_BURSTLEN_SHIFT                       (11)
>>>>>>> +#define WINCONx_BLD_PLANE                    (0 << 8)
>>>>>>> +#define WINCONx_BLD_PIX                              (1 << 8)
>>>>>>> +#define WINCONx_ALPHA_MUL                    (1 << 7)
>>>>>>> +
>>>>>>> +#define WINCONx_BPPMODE_MASK                 (0xf << 2)
>>>>>>> +#define WINCONx_BPPMODE_SHIFT                        (2)
>>>>>>> +#define WINCONx_BPPMODE_16BPP_565            (0x8 << 2)
>>>>>>> +#define WINCONx_BPPMODE_24BPP_BGRx           (0x7 << 2)
>>>>>>> +#define WINCONx_BPPMODE_24BPP_RGBx           (0x6 << 2)
>>>>>>> +#define WINCONx_BPPMODE_24BPP_xBGR           (0x5 << 2)
>>>>>>> +#define WINCONx_BPPMODE_24BPP_xRGB           (0x4 << 2)
>>>>>>> +#define WINCONx_BPPMODE_32BPP_BGRA           (0x3 << 2)
>>>>>>> +#define WINCONx_BPPMODE_32BPP_RGBA           (0x2 << 2)
>>>>>>> +#define WINCONx_BPPMODE_32BPP_ABGR           (0x1 << 2)
>>>>>>> +#define WINCONx_BPPMODE_32BPP_ARGB           (0x0 << 2)
>>>>>>> +#define WINCONx_ALPHA_SEL                    (1 << 1)
>>>>>>> +#define WINCONx_ENWIN                                (1 << 0)
>>>>>>> +
>>>>>>> +#define WINCON1_ALPHA_MUL_F                  (1 << 7)
>>>>>>> +#define WINCON2_ALPHA_MUL_F                  (1 << 7)
>>>>>>> +#define WINCON3_ALPHA_MUL_F                  (1 << 7)
>>>>>>> +#define WINCON4_ALPHA_MUL_F                  (1 << 7)
>>>>>>> +
>>>>>>> +/*  VIDOSDxH: The height for the OSD image(READ ONLY)*/
>>>>>>> +#define VIDOSD_H(_x)                         (0x80 + ((_x) * 4))
>>>>>>> +
>>>>>>> +/* Frame buffer start addresses: VIDWxxADD0n */
>>>>>>> +#define VIDW_BUF_START(_win)                 (0x80 + ((_win) * 0x10))
>>>>>>> +#define VIDW_BUF_START1(_win)                        (0x84 + ((_win) * 0x10))
>>>>>>> +#define VIDW_BUF_START2(_win)                        (0x88 + ((_win) * 0x10))
>>>>>>> +
>>>>>>> +#define VIDW_WHOLE_X(_win)                   (0x0130 + ((_win) * 8))
>>>>>>> +#define VIDW_WHOLE_Y(_win)                   (0x0134 + ((_win) * 8))
>>>>>>> +#define VIDW_OFFSET_X(_win)                  (0x0170 + ((_win) * 8))
>>>>>>> +#define VIDW_OFFSET_Y(_win)                  (0x0174 + ((_win) * 8))
>>>>>>> +#define VIDW_BLKOFFSET(_win)                 (0x01B0 + ((_win) * 4))
>>>>>>> +#define VIDW_BLKSIZE(win)                    (0x0200 + ((_win) * 4))
>>>>>>> +
>>>>>>> +/* Interrupt controls register */
>>>>>>> +#define VIDINTCON2                           (0x228)
>>>>>>> +
>>>>>>> +#define VIDINTCON1_INTEXTRA1_EN                      (1 << 1)
>>>>>>> +#define VIDINTCON1_INTEXTRA0_EN                      (1 << 0)
>>>>>>> +
>>>>>>> +/* Interrupt controls and status register */
>>>>>>> +#define VIDINTCON3                           (0x22C)
>>>>>>> +
>>>>>>> +#define VIDINTCON1_INTEXTRA1_PEND            (1 << 1)
>>>>>>> +#define VIDINTCON1_INTEXTRA0_PEND            (1 << 0)
>>>>>>> +
>>>>>>> +/* VIDOSDxA ~ VIDOSDxE */
>>>>>>> +#define VIDOSD_BASE                          (0x230)
>>>>>>> +
>>>>>>> +#define OSD_STRIDE                           (0x20)
>>>>>>> +
>>>>>>> +#define VIDOSD_A(_win)                               (VIDOSD_BASE + \
>>>>>>> +                                             ((_win) * OSD_STRIDE) + 0x00)
>>>>>>> +#define VIDOSD_B(_win)                               (VIDOSD_BASE + \
>>>>>>> +                                             ((_win) * OSD_STRIDE) + 0x04)
>>>>>>> +#define VIDOSD_C(_win)                               (VIDOSD_BASE + \
>>>>>>> +                                             ((_win) * OSD_STRIDE) + 0x08)
>>>>>>> +#define VIDOSD_D(_win)                               (VIDOSD_BASE + \
>>>>>>> +                                             ((_win) * OSD_STRIDE) + 0x0C)
>>>>>>> +#define VIDOSD_E(_win)                               (VIDOSD_BASE + \
>>>>>>> +                                             ((_win) * OSD_STRIDE) + 0x10)
>>>>>>> +
>>>>>>> +#define VIDOSDxA_TOPLEFT_X_MASK                      (0x1fff << 13)
>>>>>>> +#define VIDOSDxA_TOPLEFT_X_SHIFT             (13)
>>>>>>> +#define VIDOSDxA_TOPLEFT_X_LIMIT             (0x1fff)
>>>>>>> +#define VIDOSDxA_TOPLEFT_X(_x)                       (((_x) & 0x1fff) << 13)
>>>>>>> +
>>>>>>> +#define VIDOSDxA_TOPLEFT_Y_MASK                      (0x1fff << 0)
>>>>>>> +#define VIDOSDxA_TOPLEFT_Y_SHIFT             (0)
>>>>>>> +#define VIDOSDxA_TOPLEFT_Y_LIMIT             (0x1fff)
>>>>>>> +#define VIDOSDxA_TOPLEFT_Y(_x)                       (((_x) & 0x1fff) << 0)
>>>>>>> +
>>>>>>> +#define VIDOSDxB_BOTRIGHT_X_MASK             (0x1fff << 13)
>>>>>>> +#define VIDOSDxB_BOTRIGHT_X_SHIFT            (13)
>>>>>>> +#define VIDOSDxB_BOTRIGHT_X_LIMIT            (0x1fff)
>>>>>>> +#define VIDOSDxB_BOTRIGHT_X(_x)                      (((_x) & 0x1fff) << 13)
>>>>>>> +
>>>>>>> +#define VIDOSDxB_BOTRIGHT_Y_MASK             (0x1fff << 0)
>>>>>>> +#define VIDOSDxB_BOTRIGHT_Y_SHIFT            (0)
>>>>>>> +#define VIDOSDxB_BOTRIGHT_Y_LIMIT            (0x1fff)
>>>>>>> +#define VIDOSDxB_BOTRIGHT_Y(_x)                      (((_x) & 0x1fff) << 0)
>>>>>>> +
>>>>>>> +#define VIDOSDxC_ALPHA0_R_F(_x)                      (((_x) & 0xFF) << 16)
>>>>>>> +#define VIDOSDxC_ALPHA0_G_F(_x)                      (((_x) & 0xFF) << 8)
>>>>>>> +#define VIDOSDxC_ALPHA0_B_F(_x)                      (((_x) & 0xFF) << 0)
>>>>>>> +
>>>>>>> +#define VIDOSDxD_ALPHA1_R_F(_x)                      (((_x) & 0xFF) << 16)
>>>>>>> +#define VIDOSDxD_ALPHA1_G_F(_x)                      (((_x) & 0xFF) << 8)
>>>>>>> +#define VIDOSDxD_ALPHA1_B_F(_x)                      (((_x) & 0xFF) >> 0)
>>>>>>> +
>>>>>>> +/* Window MAP (Color map) */
>>>>>>> +#define WINxMAP(_win)                                (0x340 + ((_win) * 4))
>>>>>>> +
>>>>>>> +#define WINxMAP_MAP                          (1 << 24)
>>>>>>> +#define WINxMAP_MAP_COLOUR_MASK                      (0xffffff << 0)
>>>>>>> +#define WINxMAP_MAP_COLOUR_SHIFT             (0)
>>>>>>> +#define WINxMAP_MAP_COLOUR_LIMIT             (0xffffff)
>>>>>>> +#define WINxMAP_MAP_COLOUR(_x)                       ((_x) << 0)
>>>>>>> +
>>>>>>> +/* Window colour-key control registers */
>>>>>>> +#define WKEYCON                                      (0x370)
>>>>>>> +
>>>>>>> +#define WKEYCON0                             (0x00)
>>>>>>> +#define WKEYCON1                             (0x04)
>>>>>>> +#define WxKEYCON0_KEYBL_EN                   (1 << 26)
>>>>>>> +#define WxKEYCON0_KEYEN_F                    (1 << 25)
>>>>>>> +#define WxKEYCON0_DIRCON                     (1 << 24)
>>>>>>> +#define WxKEYCON0_COMPKEY_MASK                       (0xffffff << 0)
>>>>>>> +#define WxKEYCON0_COMPKEY_SHIFT                      (0)
>>>>>>> +#define WxKEYCON0_COMPKEY_LIMIT                      (0xffffff)
>>>>>>> +#define WxKEYCON0_COMPKEY(_x)                        ((_x) << 0)
>>>>>>> +#define WxKEYCON1_COLVAL_MASK                        (0xffffff << 0)
>>>>>>> +#define WxKEYCON1_COLVAL_SHIFT                       (0)
>>>>>>> +#define WxKEYCON1_COLVAL_LIMIT                       (0xffffff)
>>>>>>> +#define WxKEYCON1_COLVAL(_x)                 ((_x) << 0)
>>>>>>> +
>>>>>>> +/* color key control register for hardware window 1 ~ 4. */
>>>>>>> +#define WKEYCON0_BASE(x)             ((WKEYCON + WKEYCON0) + ((x - 1) * 8))
>>>>>>> +/* color key value register for hardware window 1 ~ 4. */
>>>>>>> +#define WKEYCON1_BASE(x)             ((WKEYCON + WKEYCON1) + ((x - 1) * 8))
>>>>>>> +
>>>>>>> +/* Window KEY Alpha value */
>>>>>>> +#define WxKEYALPHA(_win)                     (0x3A0 + (((_win) - 1) * 0x4))
>>>>>>> +
>>>>>>> +#define Wx_KEYALPHA_R_F_SHIFT                        (16)
>>>>>>> +#define Wx_KEYALPHA_G_F_SHIFT                        (8)
>>>>>>> +#define Wx_KEYALPHA_B_F_SHIFT                        (0)
>>>>>>> +
>>>>>>> +/* Blending equation */
>>>>>>> +#define BLENDE(_win)                         (0x03C0 + ((_win) * 4))
>>>>>>> +#define BLENDE_COEF_ZERO                     0x0
>>>>>>> +#define BLENDE_COEF_ONE                              0x1
>>>>>>> +#define BLENDE_COEF_ALPHA_A                  0x2
>>>>>>> +#define BLENDE_COEF_ONE_MINUS_ALPHA_A                0x3
>>>>>>> +#define BLENDE_COEF_ALPHA_B                  0x4
>>>>>>> +#define BLENDE_COEF_ONE_MINUS_ALPHA_B                0x5
>>>>>>> +#define BLENDE_COEF_ALPHA0                   0x6
>>>>>>> +#define BLENDE_COEF_A                                0xA
>>>>>>> +#define BLENDE_COEF_ONE_MINUS_A                      0xB
>>>>>>> +#define BLENDE_COEF_B                                0xC
>>>>>>> +#define BLENDE_COEF_ONE_MINUS_B                      0xD
>>>>>>> +#define BLENDE_Q_FUNC(_v)                    ((_v) << 18)
>>>>>>> +#define BLENDE_P_FUNC(_v)                    ((_v) << 12)
>>>>>>> +#define BLENDE_B_FUNC(_v)                    ((_v) << 6)
>>>>>>> +#define BLENDE_A_FUNC(_v)                    ((_v) << 0)
>>>>>>> +
>>>>>>> +/* Blending equation control */
>>>>>>> +#define BLENDCON                             (0x3D8)
>>>>>>> +#define BLENDCON_NEW_MASK                    (1 << 0)
>>>>>>> +#define BLENDCON_NEW_8BIT_ALPHA_VALUE                (1 << 0)
>>>>>>> +#define BLENDCON_NEW_4BIT_ALPHA_VALUE                (0 << 0)
>>>>>>> +
>>>>>>> +/* Interrupt control register */
>>>>>>> +#define VIDINTCON0                           (0x500)
>>>>>>> +
>>>>>>> +#define VIDINTCON0_WAKEUP_MASK                       (0x3f << 26)
>>>>>>> +#define VIDINTCON0_INTEXTRAEN                        (1 << 21)
>>>>>>> +
>>>>>>> +#define VIDINTCON0_FRAMESEL0_SHIFT           (15)
>>>>>>> +#define VIDINTCON0_FRAMESEL0_MASK            (0x3 << 15)
>>>>>>> +#define VIDINTCON0_FRAMESEL0_BACKPORCH               (0x0 << 15)
>>>>>>> +#define VIDINTCON0_FRAMESEL0_VSYNC           (0x1 << 15)
>>>>>>> +#define VIDINTCON0_FRAMESEL0_ACTIVE          (0x2 << 15)
>>>>>>> +#define VIDINTCON0_FRAMESEL0_FRONTPORCH              (0x3 << 15)
>>>>>>> +
>>>>>>> +#define VIDINTCON0_INT_FRAME                 (1 << 11)
>>>>>>> +
>>>>>>> +#define VIDINTCON0_FIFOLEVEL_MASK            (0x7 << 3)
>>>>>>> +#define VIDINTCON0_FIFOLEVEL_SHIFT           (3)
>>>>>>> +#define VIDINTCON0_FIFOLEVEL_EMPTY           (0x0 << 3)
>>>>>>> +#define VIDINTCON0_FIFOLEVEL_TO25PC          (0x1 << 3)
>>>>>>> +#define VIDINTCON0_FIFOLEVEL_TO50PC          (0x2 << 3)
>>>>>>> +#define VIDINTCON0_FIFOLEVEL_FULL            (0x4 << 3)
>>>>>>> +
>>>>>>> +#define VIDINTCON0_FIFOSEL_MAIN_EN           (1 << 1)
>>>>>>> +#define VIDINTCON0_INT_FIFO                  (1 << 1)
>>>>>>> +
>>>>>>> +#define VIDINTCON0_INT_ENABLE                        (1 << 0)
>>>>>>> +
>>>>>>> +/* Interrupt controls and status register */
>>>>>>> +#define VIDINTCON1                           (0x504)
>>>>>>> +
>>>>>>> +#define VIDINTCON1_INT_EXTRA                 (1 << 3)
>>>>>>> +#define VIDINTCON1_INT_I80                   (1 << 2)
>>>>>>> +#define VIDINTCON1_INT_FRAME                 (1 << 1)
>>>>>>> +#define VIDINTCON1_INT_FIFO                  (1 << 0)
>>>>>>> +
>>>>>>> +/* VIDCON1 */
>>>>>>> +#define VIDCON1(_x)                          (0x0600 + ((_x) * 0x50))
>>>>>>> +#define VIDCON1_LINECNT_GET(_v)                      (((_v) >> 17) & 0x1fff)
>>>>>>> +#define VIDCON1_VCLK_MASK                    (0x3 << 9)
>>>>>>> +#define VIDCON1_VCLK_HOLD                    (0x0 << 9)
>>>>>>> +#define VIDCON1_VCLK_RUN                     (0x1 << 9)
>>>>>>> +#define VIDCON1_VCLK_RUN_VDEN_DISABLE                (0x3 << 9)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_MASK             (0x7 << 4)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_RGB                      (0x0 << 4)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_GBR                      (0x1 << 4)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_BRG                      (0x2 << 4)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_BGR                      (0x4 << 4)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_RBG                      (0x5 << 4)
>>>>>>> +#define VIDCON1_RGB_ORDER_O_GRB                      (0x6 << 4)
>>>>>>> +
>>>>>>> +/* VIDTCON0 */
>>>>>>> +#define VIDTCON0                             (0x610)
>>>>>>> +
>>>>>>> +#define VIDTCON0_VBPD_MASK                   (0xffff << 16)
>>>>>>> +#define VIDTCON0_VBPD_SHIFT                  (16)
>>>>>>> +#define VIDTCON0_VBPD_LIMIT                  (0xffff)
>>>>>>> +#define VIDTCON0_VBPD(_x)                    ((_x) << 16)
>>>>>>> +
>>>>>>> +#define VIDTCON0_VFPD_MASK                   (0xffff << 0)
>>>>>>> +#define VIDTCON0_VFPD_SHIFT                  (0)
>>>>>>> +#define VIDTCON0_VFPD_LIMIT                  (0xffff)
>>>>>>> +#define VIDTCON0_VFPD(_x)                    ((_x) << 0)
>>>>>>> +
>>>>>>> +/* VIDTCON1 */
>>>>>>> +#define VIDTCON1                             (0x614)
>>>>>>> +
>>>>>>> +#define VIDTCON1_VSPW_MASK                   (0xffff << 16)
>>>>>>> +#define VIDTCON1_VSPW_SHIFT                  (16)
>>>>>>> +#define VIDTCON1_VSPW_LIMIT                  (0xffff)
>>>>>>> +#define VIDTCON1_VSPW(_x)                    ((_x) << 16)
>>>>>>> +
>>>>>>> +/* VIDTCON2 */
>>>>>>> +#define VIDTCON2                             (0x618)
>>>>>>> +
>>>>>>> +#define VIDTCON2_HBPD_MASK                   (0xffff << 16)
>>>>>>> +#define VIDTCON2_HBPD_SHIFT                  (16)
>>>>>>> +#define VIDTCON2_HBPD_LIMIT                  (0xffff)
>>>>>>> +#define VIDTCON2_HBPD(_x)                    ((_x) << 16)
>>>>>>> +
>>>>>>> +#define VIDTCON2_HFPD_MASK                   (0xffff << 0)
>>>>>>> +#define VIDTCON2_HFPD_SHIFT                  (0)
>>>>>>> +#define VIDTCON2_HFPD_LIMIT                  (0xffff)
>>>>>>> +#define VIDTCON2_HFPD(_x)                    ((_x) << 0)
>>>>>>> +
>>>>>>> +/* VIDTCON3 */
>>>>>>> +#define VIDTCON3                             (0x61C)
>>>>>>> +
>>>>>>> +#define VIDTCON3_HSPW_MASK                   (0xffff << 16)
>>>>>>> +#define VIDTCON3_HSPW_SHIFT                  (16)
>>>>>>> +#define VIDTCON3_HSPW_LIMIT                  (0xffff)
>>>>>>> +#define VIDTCON3_HSPW(_x)                    ((_x) << 16)
>>>>>>> +
>>>>>>> +/* VIDTCON4 */
>>>>>>> +#define VIDTCON4                             (0x620)
>>>>>>> +
>>>>>>> +#define VIDTCON4_LINEVAL_MASK                        (0xfff << 16)
>>>>>>> +#define VIDTCON4_LINEVAL_SHIFT                       (16)
>>>>>>> +#define VIDTCON4_LINEVAL_LIMIT                       (0xfff)
>>>>>>> +#define VIDTCON4_LINEVAL(_x)                 (((_x) & 0xfff) << 16)
>>>>>>> +
>>>>>>> +#define VIDTCON4_HOZVAL_MASK                 (0xfff << 0)
>>>>>>> +#define VIDTCON4_HOZVAL_SHIFT                        (0)
>>>>>>> +#define VIDTCON4_HOZVAL_LIMIT                        (0xfff)
>>>>>>> +#define VIDTCON4_HOZVAL(_x)                  (((_x) & 0xfff) << 0)
>>>>>>> +
>>>>>>> +/* LINECNT OP THRSHOLD*/
>>>>>>> +#define LINECNT_OP_THRESHOLD                 (0x630)
>>>>>>> +
>>>>>>> +/* CRCCTRL */
>>>>>>> +#define CRCCTRL                                      (0x6C8)
>>>>>>> +#define CRCCTRL_CRCCLKEN                     (0x1 << 2)
>>>>>>> +#define CRCCTRL_CRCSTART_F                   (0x1 << 1)
>>>>>>> +#define CRCCTRL_CRCEN                                (0x1 << 0)
>>>>>>> +
>>>>>>> +/* DECON_CMU */
>>>>>>> +#define DECON_CMU                            (0x704)
>>>>>>> +
>>>>>>> +#define DECON_CMU_ALL_CLKGATE_ENABLE         (0x3)
>>>>>>> +#define DECON_CMU_SE_CLKGATE_ENABLE          (0x1 << 2)
>>>>>>> +#define DECON_CMU_SFR_CLKGATE_ENABLE         (0x1 << 1)
>>>>>>> +#define DECON_CMU_MEM_CLKGATE_ENABLE         (0x1 << 0)
>>>>>>> +
>>>>>>> +/* DECON_UPDATE */
>>>>>>> +#define DECON_UPDATE                         (0x710)
>>>>>>> +
>>>>>>> +#define DECON_UPDATE_SLAVE_SYNC                      (1 << 4)
>>>>>>> +#define DECON_UPDATE_STANDALONE_F            (1 << 0)
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> Thanks,
>>>>> Ajay
>>>>> --
>>>>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux