Re: [PATCH v2 07/13] drm/msm/dpu: Add SM6350 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/04/2023 01:31, Konrad Dybcio wrote:
Add SM6350 support to the DPU1 driver to enable display output.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h | 191 +++++++++++++++++++++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   3 +
  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
  4 files changed, 196 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
new file mode 100644
index 000000000000..687a508cbaa6
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DPU_6_4_SM6350_H
+#define _DPU_6_4_SM6350_H
+
+static const struct dpu_caps sm6350_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0x7,
+	.qseed_type = DPU_SSPP_SCALER_QSEED4,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_ubwc_cfg sm6350_ubwc_cfg = {
+	.ubwc_version = DPU_HW_UBWC_VER_20,
+	.ubwc_swizzle = 6,
+	.highest_bank_bit = 1,
+};
+
+static const struct dpu_mdp_cfg sm6350_mdp[] = {
+	{
+	.name = "top_0", .id = MDP_TOP,
+	.base = 0x0, .len = 0x494,
+	.features = 0,
+	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+	.clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+	.clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+	.clk_ctrls[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2c4, .bit_off = 8 },
+	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+	},
+};
+
+static const struct dpu_ctl_cfg sm6350_ctl[] = {
+	{
+	.name = "ctl_0", .id = CTL_0,
+	.base = 0x1000, .len = 0x1dc,
+	.features = BIT(DPU_CTL_ACTIVE_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	},
+	{
+	.name = "ctl_1", .id = CTL_1,
+	.base = 0x1200, .len = 0x1dc,
+	.features = BIT(DPU_CTL_ACTIVE_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	},
+	{
+	.name = "ctl_2", .id = CTL_2,
+	.base = 0x1400, .len = 0x1dc,
+	.features = BIT(DPU_CTL_ACTIVE_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	},
+	{
+	.name = "ctl_3", .id = CTL_3,
+	.base = 0x1600, .len = 0x1dc,
+	.features = BIT(DPU_CTL_ACTIVE_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	},
+};
+
+static const struct dpu_sspp_cfg sm6350_sspp[] = {
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, 0x1f8, VIG_SC7180_MASK,
+		 sc7180_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, 0x1f8, DMA_SDM845_MASK,
+		 sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+		 sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),

DPU_CLK_CTRL_DMA0

+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1f8, DMA_CURSOR_SDM845_MASK,
+		 sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),

DPU_CLK_CTRL_DMA2


+};
+
+static const struct dpu_lm_cfg sm6350_lm[] = {
+	LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
+		&sc7180_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+	LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
+		&sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
+};
+
+static const struct dpu_dspp_cfg sm6350_dspp[] = {
+	DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+		 &sm8150_dspp_sblk),
+};
+
+static struct dpu_pingpong_cfg sm6350_pp[] = {
+	PP_BLK("pingpong_0", PINGPONG_0, 0x70000, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+	       DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+	       -1),
+	PP_BLK("pingpong_1", PINGPONG_1, 0x70800, PINGPONG_SM8150_MASK, 0, sdm845_pp_sblk,
+	       DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+	       -1),
+};
+
+static const struct dpu_intf_cfg sm6350_intf[] = {
+	INTF_BLK("intf_0", INTF_0, 0x6a000, 0x2c0, INTF_DP, 0, 35, INTF_SC7180_MASK,
+		 DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+		 DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25)),
+	INTF_BLK_DSI_TE("intf_1", INTF_1, 0x6a800, 0x2c0, INTF_DSI, 0, 35, INTF_SC7180_MASK,
+			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+			DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2)),
+};
+
+static const struct dpu_vbif_cfg sm6350_vbif[] = {
+	{
+	.name = "vbif_0", .id = VBIF_RT,
+	.base = 0, .len = 0x1044,
+	.features = BIT(DPU_VBIF_QOS_REMAP),
+	.xin_halt_timeout = 0x4000,
+	.qos_rt_tbl = {
+		.npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl),
+		.priority_lvl = sdm845_rt_pri_lvl,
+	},
+	.qos_nrt_tbl = {
+		.npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
+		.priority_lvl = sdm845_nrt_pri_lvl,
+	},
+	.memtype_count = 14,
+	.memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
+	},
+};
+
+static const struct dpu_qos_lut_entry sm6350_qos_linear_macrotile[] = {
+	{.fl = 0, .lut = 0x0011223344556677 },
+	{.fl = 0, .lut = 0x0011223445566777 },

Do we need two equal entries here?

Also please push the qos to the dpu_hw_catalog.c, I want to take another look at these structures and it is easier if all of them are beneath one's eyes.

+};
+
+static const struct dpu_perf_cfg sm6350_perf_data = {
+	.max_bw_low = 4200000,
+	.max_bw_high = 5100000,
+	.min_core_ib = 2500000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 1600000,
+	.min_prefill_lines = 35,
+	/* TODO: confirm danger_lut_tbl */
+	.danger_lut_tbl = {0xffff, 0xffff, 0x0, 0x0, 0xffff},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+		.entries = sm6350_qos_linear_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sm6350_qos_linear_macrotile),
+		.entries = sm6350_qos_linear_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+const struct dpu_mdss_cfg dpu_sm6350_cfg = {
+	.caps = &sm6350_dpu_caps,
+	.ubwc = &sm6350_ubwc_cfg,
+	.mdp_count = ARRAY_SIZE(sm6350_mdp),
+	.mdp = sm6350_mdp,
+	.ctl_count = ARRAY_SIZE(sm6350_ctl),
+	.ctl = sm6350_ctl,
+	.sspp_count = ARRAY_SIZE(sm6350_sspp),
+	.sspp = sm6350_sspp,
+	.mixer_count = ARRAY_SIZE(sm6350_lm),
+	.mixer = sm6350_lm,
+	.dspp_count = ARRAY_SIZE(sm6350_dspp),
+	.dspp = sm6350_dspp,
+	.pingpong_count = ARRAY_SIZE(sm6350_pp),
+	.pingpong = sm6350_pp,
+	.intf_count = ARRAY_SIZE(sm6350_intf),
+	.intf = sm6350_intf,
+	.vbif_count = ARRAY_SIZE(sm6350_vbif),
+	.vbif = sm6350_vbif,
+	.reg_dma_count = 1,
+	.dma_cfg = &sm8250_regdma,
+	.perf = &sm6350_perf_data,
+	.mdss_irqs = BIT(MDP_SSPP_TOP0_INTR) | \
+		     BIT(MDP_SSPP_TOP0_INTR2) | \
+		     BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+		     BIT(MDP_INTF0_INTR) | \
+		     BIT(MDP_INTF1_INTR)
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index db558a9ae36e..52750b592b36 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -806,6 +806,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
  #include "catalog/dpu_6_0_sm8250.h"
  #include "catalog/dpu_6_2_sc7180.h"
  #include "catalog/dpu_6_3_sm6115.h"
+#include "catalog/dpu_6_4_sm6350.h"
  #include "catalog/dpu_6_5_qcm2290.h"
#include "catalog/dpu_7_0_sm8350.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 756bff1d2185..f9611bd75e02 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -320,6 +320,8 @@ enum dpu_qos_lut_usage {
  	DPU_QOS_LUT_USAGE_LINEAR,
  	DPU_QOS_LUT_USAGE_MACROTILE,
  	DPU_QOS_LUT_USAGE_NRT,
+	DPU_QOS_LUT_USAGE_CWB,
+	DPU_QOS_LUT_USAGE_MACROTILE_QSEED,

This should probably be removed. It would be nice to clean these things up, but not as a part of sm6350.

  	DPU_QOS_LUT_USAGE_MAX,
  };
@@ -880,6 +882,7 @@ extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
  extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
  extern const struct dpu_mdss_cfg dpu_sc7180_cfg;
  extern const struct dpu_mdss_cfg dpu_sm6115_cfg;
+extern const struct dpu_mdss_cfg dpu_sm6350_cfg;
  extern const struct dpu_mdss_cfg dpu_qcm2290_cfg;
  extern const struct dpu_mdss_cfg dpu_sm8350_cfg;
  extern const struct dpu_mdss_cfg dpu_sc7280_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 0e7a68714e9e..46be7ad8d615 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1286,6 +1286,7 @@ static const struct of_device_id dpu_dt_match[] = {
  	{ .compatible = "qcom,sc8180x-dpu", .data = &dpu_sc8180x_cfg, },
  	{ .compatible = "qcom,sc8280xp-dpu", .data = &dpu_sc8280xp_cfg, },
  	{ .compatible = "qcom,sm6115-dpu", .data = &dpu_sm6115_cfg, },
+	{ .compatible = "qcom,sm6350-dpu", .data = &dpu_sm6350_cfg, },
  	{ .compatible = "qcom,sm8150-dpu", .data = &dpu_sm8150_cfg, },
  	{ .compatible = "qcom,sm8250-dpu", .data = &dpu_sm8250_cfg, },
  	{ .compatible = "qcom,sm8350-dpu", .data = &dpu_sm8350_cfg, },


--
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux