Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/04/2023 17:17, Christian Marangi wrote:
> Add Switch LED for each port for MikroTik RB3011UiAS-RM.
> 
> MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
> connected.
> 
> It was discovered that in the hardware design all 3 Switch LED trace of
> the related port is connected to the same LED. This was discovered by
> setting to 'always on' the related led in the switch regs and noticing
> that all 3 LED for the specific port (for example for port 1) cause the
> connected LED for port 1 to turn on. As an extra test we tried enabling
> 2 different LED for the port resulting in the LED turned off only if
> every led in the reg was off.
> 
> Aside from this funny and strange hardware implementation, the device
> itself have one green LED for each port, resulting in 10 green LED one
> for each of the 10 supported port.
> 
> Cc: Jonathan McDowell <noodles@xxxxxxxx>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++

Please do not send the DTS patches to the net-next, but to the Qualcomm
SoC maintainers. The DTS must not be mixed with driver code.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux