Re: [PATCH] arm64: dts: qcom: sm6115: Set up CPU cooling maps

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 18, 2023 at 01:56:56PM +0200, Konrad Dybcio wrote:
> Set up CPU cooling maps to ensure the thermal framework is aware of
> the connection between the CPUs and the TSENS sensors.
> 
> All of the maps refer to all 4 CPUs within a given cluster at a time,
> as that's what can be considered the smallest DVFS target unit - they
> all share the same voltage line and clock source.
> 

Generally software based CPU cooling is considered too slow to cope with
CPU core temperature changes, and the limits hardware working together
with OSM/EPSS will do a better job maintaining appropriate core
temperature levels.

Is there a reason why this can't be used/relied upon on this platform?


PS. Amending this mechanism with software based cooling to keep the
system at a reasonable/lower temperature is a good idea.

Regards,
Bjorn

> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 137 +++++++++++++++++++++++++++++++++++
>  1 file changed, 137 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..36ff913c1a60 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -12,6 +12,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -47,6 +48,8 @@ CPU0: cpu@0 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_0>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> +			#cooling-cells = <2>;
> +
>  			L2_0: l2-cache {
>  				compatible = "cache";
>  				cache-level = <2>;
> @@ -63,6 +66,7 @@ CPU1: cpu@1 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_0>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		CPU2: cpu@2 {
> @@ -75,6 +79,7 @@ CPU2: cpu@2 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_0>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		CPU3: cpu@3 {
> @@ -87,6 +92,7 @@ CPU3: cpu@3 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_0>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		CPU4: cpu@100 {
> @@ -99,6 +105,8 @@ CPU4: cpu@100 {
>  			dynamic-power-coefficient = <282>;
>  			next-level-cache = <&L2_1>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
> +			#cooling-cells = <2>;
> +
>  			L2_1: l2-cache {
>  				compatible = "cache";
>  				cache-level = <2>;
> @@ -115,6 +123,7 @@ CPU5: cpu@101 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_1>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		CPU6: cpu@102 {
> @@ -127,6 +136,7 @@ CPU6: cpu@102 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_1>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		CPU7: cpu@103 {
> @@ -139,6 +149,7 @@ CPU7: cpu@103 {
>  			enable-method = "psci";
>  			next-level-cache = <&L2_1>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		cpu-map {
> @@ -2471,6 +2482,24 @@ cpu4-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 6>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu4_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu4_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu4_alert0: trip-point0 {
>  					temperature = <90000>;
> @@ -2497,6 +2526,24 @@ cpu5-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 7>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu5_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu5_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu5_alert0: trip-point0 {
>  					temperature = <90000>;
> @@ -2523,6 +2570,24 @@ cpu6-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 8>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu6_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu6_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu6_alert0: trip-point0 {
>  					temperature = <90000>;
> @@ -2549,6 +2614,24 @@ cpu7-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 9>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu7_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu7_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu7_alert0: trip-point0 {
>  					temperature = <90000>;
> @@ -2575,6 +2658,24 @@ cpu45-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 10>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu45_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu45_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu45_alert0: trip-point0 {
>  					temperature = <90000>;
> @@ -2601,6 +2702,24 @@ cpu67-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 11>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu67_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu67_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu67_alert0: trip-point0 {
>  					temperature = <90000>;
> @@ -2627,6 +2746,24 @@ cpu0123-thermal {
>  			polling-delay = <0>;
>  			thermal-sensors = <&tsens0 12>;
>  
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu0123_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu0123_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
>  			trips {
>  				cpu0123_alert0: trip-point0 {
>  					temperature = <90000>;
> 
> ---
> base-commit: 4aa1da8d99724f6c0b762b58a71cee7c5e2e109b
> change-id: 20230418-topic-cool_bengal-2f5f3f47269c
> 
> Best regards,
> -- 
> Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux