On 10:35-20230418, Udit Kumar wrote: > This patch enables wkup_i2c0 node in board dts file. > and underneath eeprom CAV24C256WE. > > J7200 User Guide (Section 4.3, Table 4-2) : > https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf > > Signed-off-by: Udit Kumar <u-kumar1@xxxxxx> > --- > arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi > index fa44ed4c17d5..137492ae89c4 100644 > --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi > @@ -214,6 +214,14 @@ exp_som: gpio@21 { > }; > }; > > +&wkup_i2c0 { > + status = "okay"; > + eeprom@50 { > + compatible = "atmel,24c256"; > + reg = <0x50>; > + }; > +}; pinmux? speed ? > + > &ospi0 { > pinctrl-names = "default"; > pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; > -- > 2.34.1 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
