Re: [PATCH v3 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 18/04/2023 10:54, Krzysztof Kozlowski wrote:
The port sample interval was always 16-bit, split into low and high
bytes.  This split was unnecessary, although harmless for older devices
because all of them used only lower byte (so values < 0xff).  With
support for Soundwire controller on Qualcomm SM8550 and its devices,
both bytes will be used, thus add a new 'qcom,ports-sinterval' property
to allow 16-bit sample intervals.

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

--srini

Changes since v2:
1. Use uint16 for qcom,ports-sinterval.
    DTS will be fixed in separate patchset.
2. Add tags.
---
  .../bindings/soundwire/qcom,soundwire.yaml    | 20 +++++++++++++++++--
  1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index 98c7fc7e1189..fb44b89a754e 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -86,7 +86,7 @@ properties:
    qcom,ports-sinterval-low:
      $ref: /schemas/types.yaml#/definitions/uint8-array
      description:
-      Sample interval low of each data port.
+      Sample interval (only lowest byte) of each data port.
        Out ports followed by In ports. Used for Sample Interval calculation.
        Value of 0xff indicates that this option is not implemented
        or applicable for the respective data port.
@@ -94,6 +94,17 @@ properties:
      minItems: 3
      maxItems: 16
+ qcom,ports-sinterval:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description:
+      Sample interval of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xffff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
    qcom,ports-offset1:
      $ref: /schemas/types.yaml#/definitions/uint8-array
      description:
@@ -220,10 +231,15 @@ required:
    - '#size-cells'
    - qcom,dout-ports
    - qcom,din-ports
-  - qcom,ports-sinterval-low
    - qcom,ports-offset1
    - qcom,ports-offset2
+oneOf:
+  - required:
+      - qcom,ports-sinterval-low
+  - required:
+      - qcom,ports-sinterval
+
  additionalProperties: false
examples:



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux