From: Andrew Lunn <andrew@xxxxxxx>
Linux LEDs can be requested to perform hardware accelerated
blinking. Pass this to the PHY driver, if it implements the op.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/net/phy/phy_device.c | 18 ++++++++++++++++++
include/linux/phy.h | 12 ++++++++++++
2 files changed, 30 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5c1200160c51..538523a7cd51 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3005,6 +3005,22 @@ static int phy_led_set_brightness(struct led_classdev *led_cdev,
return err;
}
+static int phy_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct phy_led *phyled = to_phy_led(led_cdev);
+ struct phy_device *phydev = phyled->phydev;
+ int err;
+
+ mutex_lock(&phydev->lock);
+ err = phydev->drv->led_blink_set(phydev, phyled->index,
+ delay_on, delay_off);
+ mutex_unlock(&phydev->lock);
+
+ return err;
+}
+
static int of_phy_led(struct phy_device *phydev,
struct device_node *led)
{
@@ -3027,6 +3043,8 @@ static int of_phy_led(struct phy_device *phydev,
if (phydev->drv->led_brightness_set)
cdev->brightness_set_blocking = phy_led_set_brightness;
+ if (phydev->drv->led_blink_set)
+ cdev->blink_set = phy_led_blink_set;
cdev->max_brightness = 1;
init_data.devicename = dev_name(&phydev->mdio.dev);
init_data.fwnode = of_fwnode_handle(led);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f3c7e3c99f24..c5a0dc829714 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1085,6 +1085,18 @@ struct phy_driver {
*/
int (*led_brightness_set)(struct phy_device *dev,
u8 index, enum led_brightness value);
+
+ /**
+ * @led_blink_set: Set a PHY LED brightness. Index indicates
+ * which of the PHYs led should be configured to blink. Delays
+ * are in milliseconds and if both are zero then a sensible
+ * default should be chosen. The call should adjust the
+ * timings in that case and if it can't match the values
+ * specified exactly.
+ */
+ int (*led_blink_set)(struct phy_device *dev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
struct phy_driver, mdiodrv)
--
2.39.2
