Am Montag, 17. April 2023, 10:15:10 CEST schrieb Laurent Pinchart:
> Hi Marco,
>
> On Mon, Apr 17, 2023 at 10:01:17AM +0200, Marco Felsch wrote:
> > On 23-04-17, Laurent Pinchart wrote:
> > > On Mon, Apr 17, 2023 at 08:50:59AM +0200, Marco Felsch wrote:
> > > > Hi Laurent,
> > > >
> > > > your patch LGTM just one nit/idea, please see below.
> > > >
> > > > On 23-04-17, Laurent Pinchart wrote:
> > > > > Add DT nodes for the two CSI-2 receivers of the i.MX8MP.
> > > > >
> > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > > > ---
> > > > >
> > > > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 60
> > > > > +++++++++++++++++++++++
> > > > > 1 file changed, 60 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> > > > > 2dd60e3252f3..2a374a4c14a2 100644
> > > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > > > @@ -1239,6 +1239,66 @@ ldb_lvds_ch1: endpoint {
> > > > >
> > > > > };
> > > > >
> > > > > };
> > > > >
> > > > > + mipi_csi_0: csi@32e40000 {
> > > > > + compatible = "fsl,imx8mp-
mipi-csi2", "fsl,imx8mm-mipi-csi2";
> > > > > + reg = <0x32e40000 0x10000>;
> > > > > + interrupts = <GIC_SPI 17
IRQ_TYPE_LEVEL_HIGH>;
> > > > > + clock-frequency =
<500000000>;
> > > > > + clocks = <&clk
IMX8MP_CLK_MEDIA_APB_ROOT>,
> > > > > + <&clk
IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
> > > > > + <&clk
IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
> > > > > + <&clk
IMX8MP_CLK_MEDIA_AXI_ROOT>;
> > > > > + clock-names = "pclk",
"wrap", "phy", "axi";
> > > > > + assigned-clocks = <&clk
IMX8MP_CLK_MEDIA_CAM1_PIX>;
> > > > > + assigned-clock-parents =
<&clk IMX8MP_SYS_PLL2_1000M>;
> > > > > + assigned-clock-rates =
<500000000>;
> > > > > + power-domains =
<&media_blk_ctrl
> > > > > IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> > > > > + status = "disabled";
> > > > > +
> > > > > + ports {
> > > > > + #address-cells =
<1>;
> > > > > + #size-cells = <0>;
> > > > > +
> > > > > + port@0 {
> > > > > + reg =
<0>;
> > > >
> > > > If we would add:
> > > > mipi_csi_0_in:
endpoint {};
> > > >
> > > > here we could refernce it from overlays/board dts files more easily.
> > >
> > > Isn't there an unwritten rule (or consensus) that an endpoint should
> > > always have a remote-endpoint property ?
> >
> > I don't know if there is one.
> >
> > > While ports describe hardware properties of a device and should always
> > > be there regardless of connections, endpoints describe connections and
> > > I don't think they should be instantiated with a valid
> > > remote-endpoint.
> >
> > I know, therefore I mentioned it as idea to make it 'easier' to add
> > camera nodes.
>
> As a middleground, would it be useful to have a label for the port ?
> Something like
>
> mipi_csi_0: csi@32e40000 {
> ports {
> mipi_csi_0_port_0: port@0 {
> };
> };
> };
>
> An overlay could then reference that and create the endpoint. I'm not
> entirely sure how useful that would be though, as the overlay would need
> to enable the CSI node anyway. Compare
>
> --------
> &mipi_csi_0 {
> status = "okay";
> };
>
> &mipi_csi_0_port_0 {
> mipi_csi_0_in: endpoint {
> remote-endpoint = <&imx327_out>;
> };
> };
> --------
>
> with
>
> --------
> &mipi_csi_0 {
> status = "okay";
>
> ports {
> port@0 {
> mipi_csi_0_in: endpoint {
> remote-endpoint = <&imx327_out>;
> };
> };
> };
> };
> --------
>
> I have a slight preference for the latter as it groups all the CSI0 data
> in a single overlay target, but if the former is generally preferred,
> I'm fine with that too.
The former is more compact, but also raises the following dtc warnings while
creating the .dtbo:
Warning (graph_endpoint): /fragment@4/__overlay__: graph endpoint node name
should be 'endpoint'
Warning (graph_endpoint): /fragment@4/__overlay__: graph connection to node '/
fragment@1/__overlay__/ports/port@1/endpoint' is not bidirectional
for the following snippet:
&mipi_csi_0_out {
remote-endpoint = <&isp1_in>;
};
I'm not sure if there is a chance to fix at all.
Best regards,
Alexander
>
> > > > > + };
> > > > > +
> > > > > + port@1 {
> > > > > + reg =
<1>;
> > > > > + };
> > > > > + };
> > > > > + };
> > > > > +
> > > > > + mipi_csi_1: csi@32e50000 {
> > > > > + compatible = "fsl,imx8mp-
mipi-csi2", "fsl,imx8mm-mipi-csi2";
> > > > > + reg = <0x32e50000 0x10000>;
> > > > > + interrupts = <GIC_SPI 80
IRQ_TYPE_LEVEL_HIGH>;
> > > > > + clock-frequency =
<266000000>;
> > > > > + clocks = <&clk
IMX8MP_CLK_MEDIA_APB_ROOT>,
> > > > > + <&clk
IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
> > > > > + <&clk
IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
> > > > > + <&clk
IMX8MP_CLK_MEDIA_AXI_ROOT>;
> > > > > + clock-names = "pclk",
"wrap", "phy", "axi";
> > > > > + assigned-clocks = <&clk
IMX8MP_CLK_MEDIA_CAM2_PIX>;
> > > > > + assigned-clock-parents =
<&clk IMX8MP_SYS_PLL2_1000M>;
> > > > > + assigned-clock-rates =
<266000000>;
> > > > > + power-domains =
<&media_blk_ctrl
> > > > > IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
> > > > > + status = "disabled";
> > > > > +
> > > > > + ports {
> > > > > + #address-cells =
<1>;
> > > > > + #size-cells = <0>;
> > > > > +
> > > > > + port@0 {
> > > > > + reg =
<0>;
> > > > > + };
> > > > > +
> > > > > + port@1 {
> > > > > + reg =
<1>;
> > > > > + };
> > > > > + };
> > > > > + };
> > > > > +
> > > > >
> > > > > pcie_phy: pcie-phy@32f00000 {
> > > > >
> > > > > compatible = "fsl,imx8mp-
pcie-phy";
> > > > > reg = <0x32f00000 0x10000>;
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
