Re: [PATCH V3 2/7] rtc: Add support for the Loongson-2K/LS7A RTC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/04/2023 15:57:34+0800, Binbin Zhou wrote:
> This RTC module is integrated into the Loongson-2K SoC and the LS7A
> bridge chip. This version is almost entirely rewritten to make use of
> current kernel API, and it supports both ACPI and DT.
> 
> This driver is shared by MIPS-based Loongson-3A4000 system (use FDT) and
> LoongArch-based Loongson-3A5000 system (use ACPI).
> 
> Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
> Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxx>
> Signed-off-by: WANG Xuerui <git@xxxxxxxxxx>
> ---
>  drivers/rtc/Kconfig    |  11 ++
>  drivers/rtc/Makefile   |   1 +
>  drivers/rtc/rtc-ls2x.c | 345 +++++++++++++++++++++++++++++++++++++++++

This is v3 and this is still not merged in rtc-ls1x.c.

>  3 files changed, 357 insertions(+)
>  create mode 100644 drivers/rtc/rtc-ls2x.c
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 753872408615..e1b9d64d2678 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1706,6 +1706,17 @@ config RTC_DRV_LPC32XX
>  	  This driver can also be built as a module. If so, the module
>  	  will be called rtc-lpc32xx.
>  
> +config RTC_DRV_LS2X
> +	tristate "Loongson LS2X RTC"
> +	depends on MACH_LOONGSON64 || COMPILE_TEST
> +	select REGMAP_MMIO
> +	help
> +	  If you say yes here you get support for the RTC on the Loongson-2K
> +	  SoC and LS7A bridge, which first appeared on the Loongson-2H.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called rtc-ls2x.
> +
>  config RTC_DRV_PM8XXX
>  	tristate "Qualcomm PMIC8XXX RTC"
>  	depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index ea445d1ebb17..cff5df09fc60 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -82,6 +82,7 @@ obj-$(CONFIG_RTC_DRV_LOONGSON1)	+= rtc-ls1x.o
>  obj-$(CONFIG_RTC_DRV_LP8788)	+= rtc-lp8788.o
>  obj-$(CONFIG_RTC_DRV_LPC24XX)	+= rtc-lpc24xx.o
>  obj-$(CONFIG_RTC_DRV_LPC32XX)	+= rtc-lpc32xx.o
> +obj-$(CONFIG_RTC_DRV_LS2X)	+= rtc-ls2x.o
>  obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
>  obj-$(CONFIG_RTC_DRV_M41T93)	+= rtc-m41t93.o
>  obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
> diff --git a/drivers/rtc/rtc-ls2x.c b/drivers/rtc/rtc-ls2x.c
> new file mode 100644
> index 000000000000..c74dd88ae11b
> --- /dev/null
> +++ b/drivers/rtc/rtc-ls2x.c
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Loongson-2K/LS7A RTC driver
> + *
> + * Based on the original out-of-tree Loongson-2H RTC driver for Linux 2.6.32,
> + * by Shaozong Liu <liushaozong@xxxxxxxxxxx>.
> + *
> + * Maintained out-of-tree by Huacai Chen <chenhuacai@xxxxxxxxxx>.
> + * Rewritten for mainline by WANG Xuerui <git@xxxxxxxxxx>.
> + *                           Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/acpi.h>
> +
> +/* Time Of Year(TOY) counters registers */
> +#define TOY_TRIM_REG		0x20 /* Must be initialized to 0 */
> +#define TOY_WRITE0_REG		0x24 /* TOY low 32-bits value (write-only) */
> +#define TOY_WRITE1_REG		0x28 /* TOY high 32-bits value (write-only) */
> +#define TOY_READ0_REG		0x2c /* TOY low 32-bits value (read-only) */
> +#define TOY_READ1_REG		0x30 /* TOY high 32-bits value (read-only) */
> +#define TOY_MATCH0_REG		0x34 /* TOY timing interrupt 0 */
> +#define TOY_MATCH1_REG		0x38 /* TOY timing interrupt 1 */
> +#define TOY_MATCH2_REG		0x3c /* TOY timing interrupt 2 */
> +
> +/* RTC counters registers */
> +#define RTC_CTRL_REG		0x40 /* TOY and RTC control register */
> +#define RTC_TRIM_REG		0x60 /* Must be initialized to 0 */
> +#define RTC_WRITE0_REG		0x64 /* RTC counters value (write-only) */
> +#define RTC_READ0_REG		0x68 /* RTC counters value (read-only) */
> +#define RTC_MATCH0_REG		0x6c /* RTC timing interrupt 0 */
> +#define RTC_MATCH1_REG		0x70 /* RTC timing interrupt 1 */
> +#define RTC_MATCH2_REG		0x74 /* RTC timing interrupt 2 */
> +
> +/* bitmask of TOY_WRITE0_REG */
> +#define TOY_MON			GENMASK(31, 26)
> +#define TOY_DAY			GENMASK(25, 21)
> +#define TOY_HOUR		GENMASK(20, 16)
> +#define TOY_MIN			GENMASK(15, 10)
> +#define TOY_SEC			GENMASK(9, 4)
> +#define TOY_MSEC		GENMASK(3, 0)
> +
> +/* bitmask of TOY_MATCH0/1/2_REG */
> +#define TOY_MATCH_YEAR		GENMASK(31, 26)
> +#define TOY_MATCH_MON		GENMASK(25, 22)
> +#define TOY_MATCH_DAY		GENMASK(21, 17)
> +#define TOY_MATCH_HOUR		GENMASK(16, 12)
> +#define TOY_MATCH_MIN		GENMASK(11, 6)
> +#define TOY_MATCH_SEC		GENMASK(5, 0)
> +
> +/* bitmask of RTC_CTRL_REG */
> +#define RTC_ENABLE		BIT(13) /* 1: RTC counters enable */
> +#define TOY_ENABLE		BIT(11) /* 1: TOY counters enable */
> +#define OSC_ENABLE		BIT(8) /* 1: 32.768k crystal enable */
> +#define TOY_ENABLE_MASK		(TOY_ENABLE | OSC_ENABLE)
> +
> +/* PM domain registers */
> +#define PM1_STS_REG		0x0c /* Power management 1 status register */
> +#define RTC_STS			BIT(10) /* RTC status */
> +#define PM1_EN_REG		0x10 /* Power management 1 enable register */
> +#define RTC_EN			BIT(10) /* RTC event enable */
> +
> +/* Offset of PM domain from RTC domain, for rtc alarm */
> +enum ls2x_pm_offset {
> +	GENERIC_OFFSET = 0x100,
> +	LS2K1000_OFFSET = 0x800,
> +};
> +
> +struct ls2x_rtc_priv {
> +	spinlock_t lock; /* protects PM registers access */
> +	int irq;
> +	struct rtc_device *rtcdev;
> +	struct regmap *regmap;
> +	void __iomem *pm_base; /* PM domain base, for rtc alarm */
> +};
> +
> +static const struct regmap_config ls2x_rtc_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +};
> +
> +/* IRQ Handlers */
> +static irqreturn_t ls2x_rtc_isr(int irq, void *id)
> +{
> +	struct ls2x_rtc_priv *priv = (struct ls2x_rtc_priv *)id;
> +
> +	rtc_update_irq(priv->rtcdev, 1, RTC_AF | RTC_IRQF);
> +	return IRQ_HANDLED;
> +}
> +
> +static u32 ls2x_rtc_handler(void *id)
> +{
> +	u32 ret;
> +	struct ls2x_rtc_priv *priv = (struct ls2x_rtc_priv *)id;
> +
> +	spin_lock(&priv->lock);
> +	/* Disable rtc event */
> +	writel(readl(priv->pm_base + PM1_EN_REG) & ~RTC_EN,
> +	       priv->pm_base + PM1_EN_REG);
> +
> +	/* Clear rtc interrupt status */
> +	writel(RTC_STS, priv->pm_base + PM1_STS_REG);
> +	spin_unlock(&priv->lock);
> +
> +	/*
> +	 * The TOY_MATCH0_REG should be cleared 0 here,
> +	 * otherwise the interrupt cannot be cleared.
> +	 */
> +	ret = regmap_write(priv->regmap, TOY_MATCH0_REG, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	rtc_update_irq(priv->rtcdev, 1, RTC_AF | RTC_IRQF);
> +	return 0;
> +}
> +
> +static int ls2x_rtc_read_time(struct device *dev, struct rtc_time *tm)
> +{
> +	int ret;
> +	u32 ctrl_data, rtc_data[2];
> +	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
> +
> +	ret = regmap_read(priv->regmap, RTC_CTRL_REG, &ctrl_data);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (!(ctrl_data & TOY_ENABLE_MASK))
> +		return -EINVAL;
> +
> +	ret = regmap_bulk_read(priv->regmap, TOY_READ0_REG, rtc_data,
> +			       ARRAY_SIZE(rtc_data));

There is still no answer on whether the TOY_READ0_REG and TOY_READ1_REG
are latched.

> +	if (ret < 0)
> +		return ret;
> +
> +	tm->tm_sec = FIELD_GET(TOY_SEC, rtc_data[0]);
> +	tm->tm_min = FIELD_GET(TOY_MIN, rtc_data[0]);
> +	tm->tm_hour = FIELD_GET(TOY_HOUR, rtc_data[0]);
> +	tm->tm_mday = FIELD_GET(TOY_DAY, rtc_data[0]);
> +	tm->tm_mon = FIELD_GET(TOY_MON, rtc_data[0]) - 1;
> +	tm->tm_year = rtc_data[1];
> +
> +	return 0;
> +}
> +
> +static int ls2x_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> +	int ret;
> +	u32 rtc_data[2];
> +	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
> +
> +	rtc_data[0] = FIELD_PREP(TOY_SEC, tm->tm_sec)
> +		    | FIELD_PREP(TOY_MIN, tm->tm_min)
> +		    | FIELD_PREP(TOY_HOUR, tm->tm_hour)
> +		    | FIELD_PREP(TOY_DAY, tm->tm_mday)
> +		    | FIELD_PREP(TOY_MON, tm->tm_mon + 1);
> +	rtc_data[1] = tm->tm_year;
> +
> +	ret = regmap_bulk_write(priv->regmap, TOY_WRITE0_REG, rtc_data,
> +				ARRAY_SIZE(rtc_data));
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Enable RTC TOY counters and crystal */
> +	return regmap_update_bits(priv->regmap, RTC_CTRL_REG, TOY_ENABLE_MASK,
> +				  TOY_ENABLE_MASK);
> +}
> +
> +static int ls2x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> +	int ret;
> +	u32 alarm_data;
> +	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
> +
> +	ret = regmap_read(priv->regmap, TOY_MATCH0_REG, &alarm_data);
> +	if (ret < 0)
> +		return ret;
> +
> +	alrm->time.tm_sec = FIELD_GET(TOY_MATCH_SEC, alarm_data);
> +	alrm->time.tm_min = FIELD_GET(TOY_MATCH_MIN, alarm_data);
> +	alrm->time.tm_hour = FIELD_GET(TOY_MATCH_HOUR, alarm_data);
> +	alrm->time.tm_mday = FIELD_GET(TOY_MATCH_DAY, alarm_data);
> +	alrm->time.tm_mon = FIELD_GET(TOY_MATCH_MON, alarm_data) - 1;
> +	/*
> +	 * This is a hardware bug.
> +	 * The year field in the SYS_TOYMATCH has only 6 bits(bits[31:26]),
> +	 * so it can only be set from 1900 to 1963.
> +	 * In order to avoid an invalid alarm value during booting, we manually
> +	 * add 64 after reading the year field (equivalent to filling in the
> +	 * high bits).
> +	 */
> +	alrm->time.tm_year = FIELD_GET(TOY_MATCH_YEAR, alarm_data) + 64;

This is restricting to the 1964 to 2027 range whereas you claim the RTC
has a 2000 to 2099 range. Why don't you simply do 2000 to 2063 which
would at least match most of it.

I am very very disappointed. I had all these comments on v1 and v2, you
are sending v3 with the exact same issues. How can I trust this is ever
going to progress in the right direction?


-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux