[PATCH RFC v2 2/3] mmc: dw_mmc-histb: add support for hi3798mv200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yang Xiwen <forbidden405@xxxxxxxxxxx>

Add support for Hi3798MV200 specific extension.

Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx>
---
 drivers/mmc/host/dw_mmc-histb.c | 110 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 109 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/dw_mmc-histb.c b/drivers/mmc/host/dw_mmc-histb.c
index 106e586bcff4b..039b6df0e8c4d 100644
--- a/drivers/mmc/host/dw_mmc-histb.c
+++ b/drivers/mmc/host/dw_mmc-histb.c
@@ -16,10 +16,14 @@
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
+#define SDMMC_TUNING_CTRL	0x118
+#define SDMMC_TUNING_FIND_EDGE	BIT(5)
+
 #define ALL_INT_CLR		0x1ffff
 
 enum dw_mci_histb_type {
 	DW_MCI_TYPE_HI3798CV200,
+	DW_MCI_TYPE_HI3798MV200,
 };
 
 static struct dw_mci_histb_compat {
@@ -29,6 +33,9 @@ static struct dw_mci_histb_compat {
 	{
 		.compatible = "hisilicon,hi3798cv200-dw-mshc",
 		.ctrl_type = DW_MCI_TYPE_HI3798CV200,
+	}, {
+		.compatible = "hisilicon,hi3798mv200-dw-mshc",
+		.ctrl_type = DW_MCI_TYPE_HI3798MV200,
 	},
 };
 
@@ -36,6 +43,7 @@ struct dw_mci_histb_priv {
 	enum dw_mci_histb_type ctrl_type;
 	struct clk *sample_clk;
 	struct clk *drive_clk;
+	struct clk *sap_dll_mode_clk;
 };
 
 static void dw_mci_histb_set_ios(struct dw_mci *host, struct mmc_ios *ios)
@@ -68,7 +76,10 @@ static void dw_mci_histb_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 	if (ios->timing == MMC_TIMING_MMC_HS ||
 	    ios->timing == MMC_TIMING_LEGACY)
 		clk_set_phase(priv->drive_clk, 180);
-	else if (ios->timing == MMC_TIMING_MMC_HS200)
+	else if (ios->timing == MMC_TIMING_MMC_DDR52) {
+		clk_set_phase(priv->drive_clk, 90);
+		clk_set_phase(priv->sample_clk, 45);
+	} else if (ios->timing == MMC_TIMING_MMC_HS200)
 		clk_set_phase(priv->drive_clk, 135);
 }
 
@@ -133,6 +144,75 @@ static int dw_mci_hi3798cv200_execute_tuning(struct dw_mci_slot *slot,
 	return err;
 }
 
+static int dw_mci_hi3798mv200_execute_tuning_mix_mode(struct dw_mci_slot *slot,
+					     u32 opcode)
+{
+	static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 };
+	struct dw_mci *host = slot->host;
+	struct dw_mci_histb_priv *priv = host->priv;
+	int raise_point = -1, fall_point = -1;
+	int err, prev_err = -1;
+	int found = 0;
+	int regval;
+	int i;
+
+	clk_disable(priv->sap_dll_mode_clk);
+	for (i = 0; i < ARRAY_SIZE(degrees); i++) {
+		clk_set_phase(priv->sample_clk, degrees[i]);
+		mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+		err = mmc_send_tuning(slot->mmc, opcode, NULL);
+		if (err)
+			found = 1;
+		else {
+			regval = mci_readl(host, TUNING_CTRL);
+			if (regval & SDMMC_TUNING_FIND_EDGE)
+				found = 1;
+		};
+
+		if (i > 0) {
+			if (err && !prev_err)
+				fall_point = i - 1;
+			if (!err && prev_err)
+				raise_point = i;
+		}
+
+		if (raise_point != -1 && fall_point != -1)
+			goto tuning_out;
+
+		prev_err = err;
+		err = 0;
+	}
+
+tuning_out:
+	clk_enable(priv->sap_dll_mode_clk);
+	if (found) {
+		if (raise_point == -1)
+			raise_point = 0;
+		if (fall_point == -1)
+			fall_point = ARRAY_SIZE(degrees) - 1;
+		if (fall_point < raise_point) {
+			if ((raise_point + fall_point) >
+			    (ARRAY_SIZE(degrees) - 1))
+				i = fall_point / 2;
+			else
+				i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2;
+		} else {
+			i = (raise_point + fall_point) / 2;
+		}
+
+		clk_set_phase(priv->sample_clk, degrees[i]);
+		dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n",
+			raise_point, fall_point, degrees[i]);
+	} else {
+		dev_err(host->dev, "No valid clk_sample shift! use default\n");
+		err = -EINVAL;
+	}
+
+	mci_writel(host, RINTSTS, ALL_INT_CLR);
+	return err;
+}
+
 static int dw_mci_histb_init(struct dw_mci *host)
 {
 	struct dw_mci_histb_priv *priv;
@@ -160,6 +240,14 @@ static int dw_mci_histb_init(struct dw_mci *host)
 		return PTR_ERR(priv->drive_clk);
 	}
 
+	if (priv->ctrl_type == DW_MCI_TYPE_HI3798MV200) {
+		priv->sap_dll_mode_clk = devm_clk_get(host->dev, "sap-dll-mode");
+		if (IS_ERR(priv->sap_dll_mode_clk)) {
+			dev_err(host->dev, "failed to get sap-dll-mode clock\n");
+			return PTR_ERR(priv->sap_dll_mode_clk);
+		}
+	}
+
 	ret = clk_prepare_enable(priv->sample_clk);
 	if (ret) {
 		dev_err(host->dev, "failed to enable ciu-sample clock\n");
@@ -172,9 +260,19 @@ static int dw_mci_histb_init(struct dw_mci *host)
 		goto disable_sample_clk;
 	}
 
+	if (priv->ctrl_type == DW_MCI_TYPE_HI3798MV200) {
+		ret = clk_prepare_enable(priv->sap_dll_mode_clk);
+		if (ret) {
+			dev_err(host->dev, "failed to disable tuning mode");
+			goto disable_drive_clk;
+		}
+	}
+
 	host->priv = priv;
 	return 0;
 
+disable_drive_clk:
+	clk_disable_unprepare(priv->drive_clk);
 disable_sample_clk:
 	clk_disable_unprepare(priv->sample_clk);
 	return ret;
@@ -187,8 +285,16 @@ static const struct dw_mci_drv_data hi3798cv200_data = {
 	.execute_tuning = dw_mci_hi3798cv200_execute_tuning,
 };
 
+static const struct dw_mci_drv_data hi3798mv200_data = {
+	.common_caps = MMC_CAP_CMD23,
+	.init = dw_mci_histb_init,
+	.set_ios = dw_mci_histb_set_ios,
+	.execute_tuning = dw_mci_hi3798mv200_execute_tuning_mix_mode,
+};
+
 static const struct of_device_id dw_mci_histb_match[] = {
 	{ .compatible = "hisilicon,hi3798cv200-dw-mshc", .data = &hi3798cv200_data },
+	{ .compatible = "hisilicon,hi3798mv200-dw-mshc", .data = &hi3798mv200_data },
 	{},
 };
 
@@ -208,6 +314,8 @@ static int dw_mci_histb_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(priv->drive_clk);
 	clk_disable_unprepare(priv->sample_clk);
+	if (priv->ctrl_type == DW_MCI_TYPE_HI3798MV200)
+		clk_disable_unprepare(priv->sap_dll_mode_clk);
 
 	dw_mci_pltfm_remove(pdev);
 

-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux