On 23:44-20230414, Udit Kumar wrote:
> Fixes: 9ae21ac445e9 ("arm64: dts: ti: k3-j7200: Fix wakeup pinmux range")
In the wrong place.
>
> wkup_pmx splits into multiple regions. Like
>
> wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
> wkup_pmx1 -> 2 pins (WKUP_PADCONFIG 14 - 15)
> wkup_pmx2 -> 59 pins (WKUP_PADCONFIG 26 - 84)
> wkup_pmx3 -> 8 pins (WKUP_PADCONFIG 93 - 100)
>
> With this split, pin offset needs to be adjusted to
> match with new pmx for all pins above wkup_pmx0.
>
> Example a pin under wkup_pmx1 should start from 0 instead of
> old offset(0x38 WKUP_PADCONFIG 14 offset)
>
> J7200 Datasheet (Table 6-106, Section 6.4 Pin Multiplexing) :
> https://www.ti.com/lit/ds/symlink/dra821u.pdf
Drop the preceding whitespace.
>
> Signed-off-by: J Keerthi <j-keerthy@xxxxxx>
Spell check name please, I think he usually goes with:
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
If this patch is from Keerthy, the patch should have a "From:"
> Signed-off-by: Udit Kumar <u-kumar1@xxxxxx>
> ---
> .../dts/ti/k3-j7200-common-proc-board.dts | 28 +++++++++----------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index 0d39d6b8cc0c..63633e4f6c59 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -83,25 +83,25 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
> &wkup_pmx2 {
> mcu_cpsw_pins_default: mcu-cpsw-pins-default {
> pinctrl-single,pins = <
> - J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
> - J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
> - J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
> - J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
> - J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
> - J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
> - J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
> - J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
> - J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
> - J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
> - J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
> - J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
> + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
> + J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
> + J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
> + J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
> + J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
> + J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
> + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
> + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
> + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
> + J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
> + J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
> + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
nice catch.
> >;
> };
>
> mcu_mdio_pins_default: mcu-mdio1-pins-default {
> pinctrl-single,pins = <
> - J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
> - J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
> + J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
> + J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
> >;
> };
> };
> --
> 2.34.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
